Connectivity & Media
Sub categories
Showing Results for Connectivity & Media
-
ACTi
SKU: ERE032720
ACTi THE Enterprise Dovetail Power Cable Connects - ERE032720
- Proprietary dovetail connector locks securely, preventing accidental disconnection post-install.
- Engineered exclusively for ACTi THE Enterprise camera series, eliminating compatibility guesswork.
- Mechanical locking interface maintains reliable power in high-traffic retail, healthcare, and education sites.
$86.90 $85.99 Save $0.91The item has been added -
Add to Cart The item has been addedAxis
SKU: 01491-001
Axis 01491-001 Surveillance Card 128GB microSDXC
128GB microSDXC for Axis cameras with 48–72hr continuous recording
- Purpose-built for 24/7 surveillance; handles thermal and write-cycle stress
- Real-time health monitoring alerts you to card wear and available space
- Includes SD adapter; 3-year warranty covers edge recording deployments
In stock · Ships same business day$99.00 $95.99 Save $3.01The item has been added -
Add to Cart The item has been addedAxis
SKU: 01678-001
Axis 01678-001 Surveillance Card 128GB microSDXC 10-Pack
128GB microSDXC 10-pack for Axis cameras with health monitoring
- 1.28TB total capacity; 8–12 hours 1080p recording per card
- High-endurance design sustains 24/7 sequential writes without throttling
- Real-time card health status monitoring for predictive maintenance
In stock · Ships same business day$990.00 $765.99 Save $224.01The item has been added -
Add to Cart The item has been addedAxis
SKU: 01706-001
Axis 01706-001 Male Coupler 1.5" NPS/NPT
1.5" male coupler connects modern Axis pendant kits to legacy mounts
- 1.5" NPS/NPT male thread fits existing female ports on older infrastructure
- Aluminum with black anodized finish resists corrosion in humid or coastal environments
- Included lock nut prevents vibration loosening during operation
In stock · Ships same business day$52.00 $51.99 Save $0.01The item has been added -
Add to Cart The item has been addedAxis
SKU: 01714-001
Axis 01714-001 Terminal Block to 3.5mm Audio Extension
Terminal block to 3.5mm audio conversion for Axis IP cameras
- Passive design connects professional screw terminals to standard 3.5mm jacks
- Supports mono and stereo audio with no external power required
- IP65 rated housing withstands 24/7 security deployments in varied conditions
In stock · Ships same business day$11.00 $10.99 Save $0.01The item has been added -
Axis
SKU: 01845-001
Axis 01845-001 EX d Cable Gland M20
M20 EX d cable gland for flameproof enclosures in hazardous areas
- EX d M20 cable gland for hazardous-area enclosures
- Flameproof construction for ATEX explosive atmospheres
- Non-armored cable entry for intrinsically safe runs
$339.00 $327.99 Save $11.01The item has been added -
Axis
SKU: 02366-021
Axis 02366-021 1TB Surveillance Card 10-Pack
1TB microSDXC cards (10-pack) for Axis surveillance edge storage
- 1TB capacity per card supports 4–6 days continuous 24/7 recording on single 4MP camera
- UHS-U3 with 39 MB/s sustained write handles multiple concurrent video streams without throttling
- 100 MB/s read speed accelerates video retrieval and forensic evidence export
$5,819.00 $5,643.99 Save $175.01The item has been added -
Axis
SKU: 02471-001
Axis 02471-001 Enterprise 4TB Hard Drive
4TB enterprise drive for 24/7 surveillance with RAID support
- 4TB capacity sustains multi-camera HD recording without frequent management
- Enterprise-grade design rated for continuous 24/7 operation in surveillance systems
- RAID-compatible with matching capacity drives for redundancy and data protection
$779.00 $754.99 Save $24.01The item has been added -
Add to Cart The item has been addedAxis
SKU: 02472-001
Axis 02472-001 Enterprise 8TB Hard Drive
8TB enterprise drive for 24/7 surveillance with RAID support
- 8TB capacity consolidates multiple smaller drives into one unit
- Built for continuous operation in airports, warehouses, industrial sites
- RAID 1, 5, 6, 10 compatible for distributed NVR deployments
In stock · Ships same business day$1,139.00 $1,103.99 Save $35.01The item has been added -
Axis
SKU: 03057-001
Axis 03057-001 Explosion-Protected Cable Gland
M20 explosion-protected cable gland for hazardous gas/dust zones
- Explosion-protected cable gland for hazardous-location camera installs
- Maintains explosion-proof seal at the cable entry point
- Built for chemical plants, refineries, and energy sites
$129.00 $124.99 Save $4.01The item has been added -
Axis
SKU: 03058-001
Axis 03058-001 Explosion-Protected Cable Gland M25
M25 explosion-protected cable gland for hazardous gas and dust areas
- M25 explosion-protected cable gland for armored cable
- ATEX II 2G + 1D Ex db IIC + Ex ta IIIC Da certified
- PESO and INMETRO regulatory compliance for global use
$134.00 $128.99 Save $5.01The item has been added -
Axis
SKU: 03075-001
Axis 03075-001 Explosion-Protected Cable Gland
M20 explosion-protected cable gland for hazardous atmosphere zones
- M20 explosion-protected cable gland for hazardous areas
- Non-armored cable design for confined enclosure runs
- Multiple international certifications for global use
$99.00 $95.99 Save $3.01The item has been added -
Axis
SKU: 03076-001
Axis 03076-001 Explosion-Protected Cable Gland M25
M25 explosion-protected cable gland for ATEX/IECEx hazardous zones
- M25 explosion-protected cable gland for Group IIC gases
- ATEX II 2G + 1D Ex db + Ex ta IIIC Da certified
- Non-armored cable entry for confined hazardous-area runs
$99.00 $95.99 Save $3.01The item has been added -
Axis
SKU: 03094-001
Axis 03094-001 Explosion-Protected Cable Gland
- IP66 explosion-protected cable gland for hazardous-area camera installs
- Operating -40 to 85 C (-40 to 185 F) for refinery and process zones
- Compact 0.09 kg housing with 5-year warranty
$41.00 $40.99 Save $0.01The item has been added -
Axis
SKU: 03389-001
Axis 03389-001 Cable Gasket 5-Pack
Cable gaskets for Axis corner-mount outdoor sealing, 5-pack
- 5-pack of cable gaskets for Axis corner mounts
- Seals cable pass-throughs against weather ingress
- Direct-fit OEM replacement for corner-mount systems
$49.00 $48.99 Save $0.01The item has been added -
Axis
SKU: 03466-001
Axis 03466-001 TD2903-E Cable Kit - An accessory kit that allows
- Cable extension kit for Axis TD2903-E thermal detector installs
- Adds reach from sensor mount point to junction box termination
- Maintains conductor gauge for extended thermal sensor cable runs
$129.00 $124.99 Save $4.01The item has been added
Connectivity & Media
Connectivity and media components support reliable communication between cameras, access control devices, intercom systems, and network infrastructure. Proper cabling and connection hardware ensure stable performance, reduced signal loss, and long-term system reliability.
Plan Your Deployment
- Cable type selection (Ethernet, fiber, coaxial as applicable)
- Distance requirements and signal integrity planning
- Environmental considerations (indoor, plenum, outdoor-rated)
- Connector compatibility and termination standards
- Future expansion and structured cabling design
Connectivity & Media — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 2 working models of connectivity & media sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Type | Accessory |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.