Accessories
Sub categories
Compliance & Site Essentials
13 items
Connectivity & Media
5394 items
Covers & Protection
1434 items
Electrical & Power
854 items
Installation Hardware & Kits
730 items
Mounting Brackets & Kits
4026 items
Software & Licenses
126 items
Showing Results for Accessories
-
ACTi
SKU: EPR8A65080-000
ACTi Balancebox Mobile Stand + 650-80 W/ Vesa - EPR8A65080-000
- Integrated 80W power supply eliminates a separate PSU, reducing cable clutter.
- VESA-compatible mount supports standard 100x100mm patterns for broad monitor fit.
- Mobile stand form factor enables rapid redeployment between sites without rewiring.
$6,699.00 $3,783.99 Save $2,915.01The item has been added -
ACTi
SKU: EPR8A88444-MS
ACTi Balancebox Mobile Stand MIX + 400-40 W/ - EPR8A88444-MS
- Integrated 40W power delivery eliminates separate power runs when repositioning displays.
- Wheeled base with brake engagement enables safe, controlled relocation across control-room floors.
- Purpose-built for ACTi MIX-series displays; verify MIX model mounting interface before ordering.
$2,779.00 $1,568.99 Save $1,210.01The item has been added -
ACTi
SKU: EPR8A88666-MS
ACTi Balancebox Mobile Stand MIX + 400-90 W/ - EPR8A88666-MS
- Delivers 90W of integrated power, eliminating separate power infrastructure on-site.
- Mobile stand form factor enables rapid deployment in staging areas and temp installs.
- Supports multiple low-power devices or a single high-draw camera within the 90W budget.
$2,779.00 $1,568.99 Save $1,210.01The item has been added -
ACTi
SKU: CTS-CMNTB-RL50
ACTi Black Steel Ceiling Mount FOR RL500 - CTS-CMNTB-RL50
- Black steel construction resists vibration, maintaining camera focus in high-traffic areas.
- Purpose-built exclusively for the ACTi RL500, ensuring precise mechanical fit and load rating.
- Ceiling-recessed design conceals mounting hardware for a clean, low-profile installation.
$49.00 $48.99 Save $0.01The item has been added -
ACTi
SKU: CTI-FOBIO-PANL-V1+TAF
ACTi BLE Clicker FOB (6 PER Package)for - CTI-FOBIO-PANL-V1+TAF
- Six BLE FOBs per pack reduce per-credential cost for multi-door deployments.
- Battery-powered design eliminates wiring runs at each credential point.
- ACTi-native BLE pairing ensures verified interop with supported panel models.
$109.99The item has been added -
ACTi
SKU: BT-NEWMIC
ACTi Bluetooth Microphone Array FOR Q & Z Series - BT-NEWMIC
- Four directional mics deliver 360° coverage, eliminating audio dead zones in any room layout.
- Bluetooth or USB Type-C dual-mode connection enables fast, cableless deployment on ACTi Q/Z displays.
- Built-in echo cancellation and noise reduction keep speech intelligible during live calls or recordings.
$449.00 $247.99 Save $201.01The item has been added -
ACTi
SKU: PMAX-1501
ACTi Cable Gland for Outdoor Domes (except - PMAX-1501
- Seals cable entry on ACTi outdoor dome cameras against rain, dust, and temperature cycling.
- Designed for non-hemispheric outdoor dome form factors — verify fit against your camera model.
- Install before power-up to ensure the cable jacket is fully seated and water ingress is prevented.
$36.00 $35.99 Save $0.01The item has been added -
ACTi
SKU: CTI-OTHER-ADJX-S4
ACTi Camera Shelf- Compatible With V4 Stands - CTI-OTHER-ADJX-S4
- Factory-designed interface mounts directly to ACTi V4 stands—no adapters required.
- Passive component needs no power or network connections, simplifying installation.
- V4-specific fit ensures proper camera alignment and stability in fixed deployments.
$199.00 $176.99 Save $22.01The item has been added -
ACTi
SKU: CTI-OTHER-PENC
ACTI Capacitive Pens And Holder - 2 Pack Pen - Cti-Other-Penc
- Two-pack ensures a backup stylus is always available at the monitoring station.
- Capacitive tip allows touchscreen input without removing PPE or gloves on shift.
- Desk-mounted holder keeps pens organized and immediately accessible at the console.
$215.00 $190.99 Save $24.01The item has been added -
ACTi
SKU: CDS-AM100-WF24
ACTI Cds-AM100-WF24
- Enables flush ceiling installation of ACTi dome cameras with no visible conduit.
- Designed for drop-tile or drywall ceilings in retail, office, and hospitality sites.
- Single-unit kit includes the bracket; verify dome model compatibility before ordering.
$59.99The item has been added -
ACTi
SKU: CDS-MBLDS-EVOT-H
ACTI Cds-Mblds-Evot-H
- 1920×1080 HD LCD at 1000 nits stays legible under ambient light in active ops areas.
- Mobile floor stand enables tool-free repositioning across sites with no mounting infrastructure.
- HDMI and LAN inputs plus 8 GB internal storage support ACTi NVR and VMS workflows.
$4,829.99The item has been added -
ACTi
SKU: CDS-MOUNT-FIXW-NI
ACTi Cds-mount-fixw-ni
- Fixed wall mount eliminates pan-tilt hardware where a set sightline is sufficient.
- Designed for ACTi dome cameras — verify model compatibility before installation.
- Mount to structural backing (studs, concrete, steel) for vibration-stable long-term aim.
$49.00 $48.99 Save $0.01The item has been added -
ACTi
SKU: CDS-NIO43-NIDS-S15
ACTI Cds-NIO43-Nids-S15
- PCAP touch technology ensures reliable multi-touch input in demanding environments.
- HDMI, USB-C, USB, and Ethernet ports support flexible AV and network integration.
- Wall-mount form factor simplifies installation in control rooms or lobby deployments.
$904.99The item has been added -
ACTi
SKU: CDS-NIO55-NIDS-S10
ACTI Cds-NIO55-Nds-S10 - Cds-NIO55-Nids-S10
- Extends Ethernet connectivity to ACTi NIO55 series recorders and CDS platforms.
- Bridges isolated recording systems to IP infrastructure for NVR integration.
- Cold-install module seats in designated slot; verify link via management UI before service.
$1,699.00 $1,407.99 Save $291.01The item has been added -
ACTi
SKU: CDS-NIO55-NIDS-S20
ACTI Cds-NIO55-Nids-S20
- Extends Ethernet network ports on ACTi NIO-series NVR deployments via RJ-45.
- Bridges video traffic onto isolated segments, reducing bandwidth contention.
- Mounts near existing NVR or switch infrastructure to minimize cable runs.
$1,307.99The item has been added -
ACTi
SKU: CDS-TMBDS-WAYP-32
ACTI Cds-Tmbds-Wayp-32
- Purpose-built ACTi hardware module maintains factory specs across your deployment.
- Engineered for commercial installation environments requiring reliable system expansion.
- Verify compatibility with your ACTi cameras, NVRs, or platforms before ordering.
$1,810.99The item has been added
Accessories
Surveillance accessories support reliable system deployment, from mounting hardware and enclosures to power components and installation materials. Select the right supporting equipment to ensure durability, safety, and long-term performance.
Deployment Considerations
- Environmental protection and weather resistance
- Mounting stability and load support
- Power and voltage compatibility
- Cable management and termination quality
- Compliance with local safety standards