IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Add to Cart The item has been added
Valcom

SKU: VP-2124D

Valcom VP-2124D 24VDC 2A Power Supply

Regulated 24VDC 2A power supply for paging and audio systems
- 48W output (24VDC @ 2A continuous) with stable regulated voltage
- Wall bracket, 19" rack rail, or DIN rail mounting in tight spaces
- Universal 110–240V AC input; compact 0.60 lb form factor
In stock · Ships same business day

$237.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Valcom

SKU: VP-324D

Valcom VP-324D 24VDC 300mA Regulated Power Supply

24VDC regulated supply, 300mA output for Valcom paging systems
- 300mA @ 24VDC regulated and filtered for clean audio without dropout
- Receptacle mount design fits rack, wall, or cabinet installations
- Rated 20-year lifespan in standard paging service environments
In stock · Ships same business day

$37.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Valcom

SKU: VP-412A

Valcom VP-412A 12VDC Power Supply Receptacle Mount

12VDC receptacle-mount supply, 400mA unfiltered for Valcom systems
- 400mA unfiltered output integrates directly into cabinet receptacles
- 12VDC reduces voltage drop over extended cable runs vs. 24V alternatives
- AC 130–260V input operates worldwide; indoor climate-controlled use only
In stock · Ships same business day

$39.99

Add to Cart
The item has been added
Compare

Out of stock
Valcom

SKU: VP-6124-UPS

Valcom VP-6124-UPS Battery Back-Up Adapter

Battery backup for VP-6124 systems during AC power loss
- Maintains microphone input and voice communication when mains power fails
- Internal batteries included; ready to install on compatible Valcom systems
- Keeps emergency communications active during outages without external power
Special Order · Ships in 2-3 weeks

$209.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Valcom

SKU: VP-624D

Valcom VP-624D 24VDC 600mA Regulated Power Supply

24VDC regulated power supply, 600mA max, wall or rack mount
- 24VDC regulated and filtered output eliminates ripple for clean audio
- 600mA capacity supports distributed paging systems and control devices
- Compact 0.36 lb form factor fits wall enclosures and equipment racks
In stock · Ships same business day

$63.99 $57.99 Save $6.00

Add to Cart
The item has been added
Compare

Out of stock
Valcom

SKU: VP-9202

Valcom VP-9202 Power Supply Shelf (RU)

19-inch rack shelf for dual 165W Valcom power supplies
- Holds two VP-6124 power supplies (165W each) in standard EIA racks
- Rigid shelf design supports dual units without flex or movement
- Weighs 5.4 lbs; maintains easy access to connectors and indicators
Special Order · Ships in 2-3 weeks

$72.99 $64.99 Save $8.00

Add to Cart
The item has been added
Compare

Out of stock
Veracity

SKU: RMPSU-4W

Veracity RMPSU-4W 12-Port Managed Gigabit Industrial Switch

12-port managed Gigabit switch for industrial surveillance networks
- Layer 2 managed switching with VLAN support for traffic control
- 12 Gigabit ports on DIN rail mount for permanent/temporary deployments
- Operates in harsh industrial temperature environments without degradation
Special Order · Ships in 2-3 weeks

$12.99 $11.99 Save $1.00

Add to Cart
The item has been added
Compare

Out of stock
Veracity

SKU: VPSU-1500-CLAMP

Veracity VPSU-1500-CLAMP Power Supply Unit

1500W industrial power supply with DIN rail CLAMP mount for surveillance
- 1500W capacity handles distributed camera systems and network infrastructure
- Industrial-grade operating temperature for outdoor cabinets and remote sites
- CLAMP mount installs on DIN rail or panel surfaces in minutes
Special Order · Ships in 2-3 weeks

$8.99 $7.99 Save $1.00

Add to Cart
The item has been added
Compare

Out of stock
Veracity

SKU: VRM-TRAY-BASE

Veracity VRM-TRAY-BASE Mounting Hardware

Metal standoff base bracket for floor-mounted wire mesh cable trays
- Floor installation design elevates cable trays above finished surfaces
- Metal construction for durability in data center and telecom deployments
- Compatible with standard wire mesh cable tray systems
Special Order · Ships in 2-3 weeks

$156.99

Add to Cart
The item has been added
Compare

Out of stock
Vivotek

SKU: AC-215

Vivotek AC-215 Indoor PTZ Smoked Dome Cover

Smoked dome cover for Vivotek SD9161-H PTZ camera
- PMMA construction maintains image clarity while concealing camera
- Quick-install mounting hardware with 76 g lightweight design
- Ø 130 x 73 mm compact form fits indoor surveillance setups
Special Order · Ships in 2-3 weeks

$24.99

Add to Cart
The item has been added
Compare

Out of stock
Vivotek

SKU: AC-224

Vivotek AC-224 Smoke Dome Cover

Smoke-tinted dome cover for discreet surveillance on Vivotek cameras
- Polycarbonate construction Ø 90 x 53 mm fits 10+ Vivotek FD-series models
- Smoke-tinted black finish blends into standard ceiling installations
- Quick-install design for fast dome swaps and maintenance access
Special Order · Ships in 2-3 weeks

$20.99

Add to Cart
The item has been added
Compare

Out of stock
Vivotek

SKU: AC-22B

Vivotek AC-22B Fixed Dome Camera Cover

Smoked dome cover for Vivotek fixed cameras with hard-coated protection
- Hard-coated polycarbonate construction resists impact and weather damage
- Smoked finish reduces glare and lens reflection in surveillance scenes
- Compatible with six Vivotek FD91xx fixed dome camera models
Special Order · Ships in 2-3 weeks

$53.99

Add to Cart
The item has been added
Compare

Out of stock
Vivotek

SKU: AC-22C

Vivotek AC-22C Hydrophobic Dome Cover

Hydrophobic dome cover for fisheye cameras in wet outdoor settings
- Water-repellent coating blocks rain, condensation, and moisture buildup
- Compatible with FD9367, FD9365, FD9387, and FD9391 Vivotek models
- Maintains lens clarity while reducing maintenance in coastal/industrial sites
Special Order · Ships in 2-3 weeks

$79.99

Add to Cart
The item has been added
Compare

Out of stock
Vivotek

SKU: AE-238-wBS

Vivotek AE-238-wBS Outdoor Weatherproof Camera Housing Heater & Blower

Weatherproof box camera housing with integrated heater & fan for -20°C to 65°C
- 10W heater prevents lens fog; 2W fan manages heat in temps up to 65°C
- IP68 waterproof and IK10 vandal-rated cast aluminum for outdoor durability
- 24VAC/VDC input with dual 24V AC/DC and 12V DC outputs; 30W max power
Special Order · Ships in 2-3 weeks

$360.00 $257.99 Save $102.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Vivotek

SKU: AE-239-wBS

Vivotek AE-239-wBS Outdoor Vandal-Proof Camera Housing

Cast aluminum housing with IP68/IK10 for extreme outdoor surveillance
- IP68 waterproof + IK10 impact rated; survives full submersion and vandal strikes
- Auto heater (10W, ≤30°C) and fan (≥40°C) maintain lens clarity and thermal stability
- PoE 802.3 input powers camera + climate control on single 30W max budget
In stock · Ships same business day

$537.99

Add to Cart
The item has been added
Compare

Out of stock
Vivotek

SKU: AE-23A-P

Vivotek AE-23A-P Fixed Outdoor Enclosure

IP68 cast aluminum enclosure with IK10 impact resistance for outdoor cameras
- Demister heater and active cooling fan prevent condensation and overheating
- IK10 rated construction resists vandalism and physical impact in harsh sites
- Adjustable sunshield reduces glare and thermal stress on mounted equipment
Special Order · Ships in 2-3 weeks

$738.99 $705.99 Save $33.00

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Valcom VP-2124D 24VDC 2A Power Supply

Valcom VP-324D 24VDC 300mA Regulated Power Supply

Valcom VP-412A 12VDC Power Supply Receptacle Mount

Valcom VP-6124-UPS Battery Back-Up Adapter

Valcom VP-624D 24VDC 600mA Regulated Power Supply

Valcom VP-9202 Power Supply Shelf (RU)

Veracity RMPSU-4W 12-Port Managed Gigabit Industrial Switch

Veracity VPSU-1500-CLAMP Power Supply Unit

Veracity VRM-TRAY-BASE Mounting Hardware

Vivotek AC-215 Indoor PTZ Smoked Dome Cover

Vivotek AC-224 Smoke Dome Cover

Vivotek AC-22B Fixed Dome Camera Cover

Vivotek AC-22C Hydrophobic Dome Cover

Vivotek AE-238-wBS Outdoor Weatherproof Camera Housing Heater & Blower

Vivotek AE-239-wBS Outdoor Vandal-Proof Camera Housing

Vivotek AE-23A-P Fixed Outdoor Enclosure

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading