IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
Axis

SKU: 01625-001

Axis TP3802 Clear Dome 4 pcs - 01625-001

Clear replacement domes for AXIS P32 indoor cameras, 4-pack
- Anti-scratch hard coating maintains optical clarity in high-traffic areas
- Four domes per pack reduce per-unit cost for multi-camera deployments
- Clear polycarbonate construction eliminates image distortion and color shift
Special Order · Ships in 2-3 weeks

$129.89 $125.99 Save $3.90

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02478-001

Axis TP3818-E Black Protective Casing P47 - 02478-001

IP66 protective casing for Axis P47 panoramic cameras in harsh outdoor sites
- IP66 dust-tight, high-pressure water-jet resistant enclosure shields optics
- UV-stabilized material withstands -40°C to +60°C thermal swings and weather
- Field-installable with included hardware; mounts directly to P47 series
In stock · Ships same business day

$56.69 $54.99 Save $1.70

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02549-001

Axis TP3824-E Clear Dome 4-Pack - 02549-001

Clear dome 4-pack with IP66 and IK10 for outdoor camera protection
- IP66 rating blocks dust and water jets; suitable for washdown and wet environments
- IK10 impact resistance withstands severe strikes without cracking or spalling
- Clear polycarbonate preserves sharp, color-accurate video on Axis network cameras
In stock · Ships same business day

$129.89 $125.99 Save $3.90

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02273-001

Axis TQ3802-E Weathershield Cover Accessory - 02273-001

IP66 weathershield for Axis cameras—rain, dust, sun, and impact protection
- IP66 rating stops rain and dust; integrated sunshield cuts lens glare
- Impact-resistant rigid enclosure protects against strikes and accidental damage
- Wall, pole, or soffit mount with included hardware; specific Axis models only
In stock · Ships same business day

$34.01 $32.99 Save $1.02

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 02806-001

Axis TQ3810-E Weathershield Protection - 02806-001

Weathershield protection for Axis IP cameras in rain, snow, and UV
- Weather-resistant composite shields against rain, snow, UV, and temperature swings
- Low-profile design integrates with camera without compromising optical clarity
- Extends camera lifespan by reducing environmental stress on sensors and components
Special Order · Ships in 2-3 weeks

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02437-001

Axis TW1104 Magnetic Mount 5-Pack - 02437-001

Tool-free magnetic mounts for Axis IP cameras on steel surfaces
- 5-pack of ferrous-surface magnets; no drilling, fasteners, or wall damage
- Secure hold on steel beams, shelving, and equipment frames without vibration slip
- Reposition in seconds; ideal for warehouses, retail, and temporary deployments
In stock · Ships same business day

$479.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02321-001

Axis TW8100 Rack Mount System Controller - 02321-001

1U rack mount consolidates 5 controllers with dual Gigabit per unit
- Stack 5 W800 System Controllers in single 1RU space, reducing footprint by ~80%
- Each controller retains independent dual Gigabit Ethernet for network redundancy
- Passive cooling with optimized airflow; unified power via single rack PDU connection
In stock · Ships same business day

$195.87 $189.99 Save $5.88

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5502-811

Axis Video Surveillance In Operation Sticker 10-Pack

10-pack surveillance deterrent stickers, 4"×4" weather-resistant vinyl
- 10 stickers per pack cover multiple entry points and perimeter zones
- Weather-resistant vinyl withstands outdoor exposure and UV damage year-round
- Peel-and-stick application—no tools or prep work required, universal compatible
Special Order · Ships in 2-3 weeks

$10.30 $9.99 Save $0.31

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Cradlepoint

SKU: 170913-000

Cradlepoint Inc 170913-000 Wall/Pole Mounting Bracket

Wall and pole mount bracket for Cradlepoint industrial routers
- Dual-orientation design fits vertical or horizontal installation needs
- Industrial operating temperature rated for outdoor and field deployment
- Tool-free mounting system reduces on-site installation labor and time
In stock · Ships same business day

$111.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Digital Watchdog

SKU: DWC-MTTWM

Digital Watchdog DWC-MTTWM Wall Mount for Turret Cameras

Aluminum wall mount for fixed-lens turret cameras, weatherproof outdoor rated
- Aluminum alloy construction resists corrosion in outdoor deployments
- Weatherproof design seals mounting points against rain and salt spray
- Turret-optimized geometry positions cameras without adapters or wobble
In stock · Ships same business day

$67.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBC-170C

Hanwha SBC-170C Silver Magnetic Skin Cover

Magnetic skin cover for Hanwha X-series cameras, tool-free installation
- Triple-magnet attachment adheres without adhesives or fasteners
- Silver finish blends into institutional and commercial environments
- Indoor/outdoor rated, -10°C to +55°C operating temperature range
In stock · Ships same business day

$35.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SBC-180B

Hanwha SBC-180B Outdoor Skin Cover, Black

Black protective skin cover for Wisenet X Series Plus outdoor cameras
- Shields against UV, weather, and physical damage on compact 4.5" × 5.2" form
- Paintable black finish matches architectural styles or custom color schemes
- Compatible with XNV-6081, XNV-6081R, XNV-6081Z, XNV-8081R, XNV-8081Z
Special Order · Ships in 2-3 weeks

$50.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBO-090GP

Hanwha SBO-090GP Gangbox Adapter Plate

Circular gangbox adapter for Hanwha cameras, TR20 mount, ø140mm
- TR20 threaded screw mount resists vibration loosening in outdoor/high-traffic installations
- Aluminum core + plastic cap handles structural load while resisting corrosion and UV
- ø140 x 13.2mm form factor fits standard electrical gangbox knockouts without protrusion
In stock · Ships same business day

$20.00 $13.99 Save $6.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-060BA

Hanwha SBP-060BA Gangbox Adapter Plate

White aluminum gangbox adapter for Hanwha cameras with M25 conduit
- M25 (3/4") conduit hole routes cables through existing electrical infrastructure
- Compact 54.1 × 38.9 × 37.7mm aluminum body fits flush in standard wall boxes
- Compatible with QNV, XNO, and PNM-C16013RVQ Hanwha camera models
In stock · Ships same business day

$20.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-276HMW

Hanwha SBP-276HMW White Mounting Cap

White protective cap shields Hanwha cameras from dust and salt spray
- Corrosion-resistant composite construction withstands coastal and high-pollution environments
- Tool-free direct mount installation on select Hanwha surveillance camera models
- White finish blends seamlessly with standard camera domes for clean appearance
In stock · Ships same business day

$75.00 $50.99 Save $24.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-302CM-06

Hanwha SBP-302CM-06 6-Inch Ivory Extension Pipe

6-inch ivory extension pipe with 1.5" threads for Hanwha pendant mounts
- Aluminum/steel construction resists sagging and handles temperature swings
- 1.5-inch threaded connection fits all Hanwha ivory hanging mounts directly
- Chain multiple pipes together with SBP-HCF coupler for greater reach
In stock · Ships same business day

$45.00 $30.99 Save $14.01

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Axis TP3802 Clear Dome 4 pcs - 01625-001

Axis TP3818-E Black Protective Casing P47 - 02478-001

Axis TP3824-E Clear Dome 4-Pack - 02549-001

Axis TQ3802-E Weathershield Cover Accessory - 02273-001

Axis TQ3810-E Weathershield Protection - 02806-001

Axis TW1104 Magnetic Mount 5-Pack - 02437-001

Axis TW8100 Rack Mount System Controller - 02321-001

Axis Video Surveillance In Operation Sticker 10-Pack

Cradlepoint Inc 170913-000 Wall/Pole Mounting Bracket

Digital Watchdog DWC-MTTWM Wall Mount for Turret Cameras

Hanwha SBC-170C Silver Magnetic Skin Cover

Hanwha SBC-180B Outdoor Skin Cover, Black

Hanwha SBO-090GP Gangbox Adapter Plate

Hanwha SBP-060BA Gangbox Adapter Plate

Hanwha SBP-276HMW White Mounting Cap

Hanwha SBP-302CM-06 6-Inch Ivory Extension Pipe

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading