IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
Pelco

SKU: SRXV2-FCMNT-1002

Pelco SRXV2-FCMNT-1002 In-Ceiling Mount

Flush in-ceiling mount for Pelco SRXV2 dome cameras, NDAA compliant
- Recessed design integrates camera flush with ceiling for clean architectural look
- OEM-engineered geometry interface built specifically for SRXV2 indoor dome cameras
- NDAA Section 889 compliant for federal and government installations
Special Order · Ships in 2-3 weeks

$68.25 $67.99 Save $0.26

Add to Cart
The item has been added
Free shipping over $499

$68.25 $67.99 Save $0.26

Add to quote Compare
Compare

Out of stock
Pelco

SKU: SRXV2-JBX-1001

Pelco SRXV2-JBX-1001 Indoor Junction Box

Indoor junction box for Pelco Sarix Value 2 dome cameras
- Organizes cable slack and protects RJ45 connectors from disconnection
- Designed for ceiling and wall-mounted installations with clean appearance
- Simplifies future camera replacements and maintenance workflows
Special Order · Ships in 2-3 weeks

$110.25 $109.99 Save $0.26

Add to Cart
The item has been added
Free shipping over $499

$110.25 $109.99 Save $0.26

Add to quote Compare
Compare

Out of stock
Pelco

SKU: SRXV2-JBX-1002

Pelco SRXV2-JBX-1002 Junction Box Sarix Value 2

Weather-sealed junction box for Sarix Value 2 outdoor bullets
- Protects Ethernet and PoE Class 3 connections from moisture and UV
- Downward cable entry minimizes moisture ingress at exposed points
- NDAA Section 889 compliant for government and regulated deployments
Special Order · Ships in 2-3 weeks

$107.10 $106.99 Save $0.11

Add to Cart
The item has been added
Free shipping over $499

$107.10 $106.99 Save $0.11

Add to quote Compare
Compare

Out of stock
Pelco

SKU: SRXV2-JBX-1003

Pelco SRXV2-JBX-1003 Outdoor Junction Box

IP66 weather-sealed junction box for outdoor Sarix Value 2 cameras
- IP66 rating protects Ethernet and PoE+ cable terminations from moisture
- Designed for dome camera installations on rooftops and exterior walls
- NDAA Section 889 compliant for regulated surveillance deployments
Special Order · Ships in 2-3 weeks

$162.75 $129.99 Save $32.76

Add to Cart
The item has been added
Free shipping over $499

$162.75 $129.99 Save $32.76

Add to quote Compare
Compare

Out of stock
Pelco

SKU: SRXV2-LD-0E

Pelco SRXV2-LD-0E Tinted Outdoor Dome Bubble

Tinted outdoor dome bubble for Sarix Value 2 cameras
- Smoked optical polycarbonate obscures lens direction for discreet monitoring
- Outdoor-rated ingress protection matches original SRXV2 environmental specs
- NDAA Section 889 compliant for government and regulated installations
Special Order · Ships in 2-3 weeks

$78.75 $62.99 Save $15.76

Add to Cart
The item has been added
Free shipping over $499

$78.75 $62.99 Save $15.76

Add to quote Compare
Compare

Out of stock
Pelco

SKU: SRXV2-LD-0I

Pelco SRXV2-LD-0I Tinted Indoor Dome Bubble

Tinted dome bubble for Sarix Value 2 indoor cameras with lens concealment
- Smoked finish hides lens orientation while maintaining surveillance in indoor spaces
- Fits Pelco Sarix Value 2 (SRXV2) indoor dome cameras with precision engineering
- NDAA Section 889 compliant for government and regulated facility deployments
Special Order · Ships in 2-3 weeks

$78.75 $62.99 Save $15.76

Add to Cart
The item has been added
Free shipping over $499

$78.75 $62.99 Save $15.76

Add to quote Compare
Compare

Out of stock
Pelco

SKU: SRXV2-LD-1E

Pelco SRXV2-LD-1E Clear Outdoor Dome Bubble

Clear replacement dome bubble for Sarix Value 2 outdoor cameras
- IP66/IK09 rated acrylic withstands weather, dust, and physical impact
- Full visible and IR light transmission for day/night surveillance clarity
- Drop-in replacement for SRXV2 platform with F1.4 aperture performance
Special Order · Ships in 2-3 weeks

$78.75 $62.99 Save $15.76

Add to Cart
The item has been added
Free shipping over $499

$78.75 $62.99 Save $15.76

Add to quote Compare
Compare

Out of stock
Pelco

SKU: SRXV2-LD-1I

Pelco SRXV2-LD-1I Clear Indoor Dome Cover

Clear replacement dome for Sarix Value 2 indoor cameras with IR pass-through
- Optical-grade acrylic preserves light transmission for visible and infrared imaging
- Quick-replacement design minimizes downtime during maintenance or optical degradation
- Fits Pelco SRXV2 indoor dome models only; not compatible with outdoor variants
Special Order · Ships in 2-3 weeks

$73.50 $72.99 Save $0.51

Add to Cart
The item has been added
Free shipping over $499

$73.50 $72.99 Save $0.51

Add to quote Compare
Compare

Out of stock
Pelco

SKU: SRXV2-LMT-1001

Pelco SRXV2-LMT-1001 L-Mount Bracket

90-degree L-bracket for Sarix Value 2 corner and corridor mounting
- OEM L-mount bracket with 90-degree offset for perpendicular wall aim
- NDAA Section 889 and TAA compliant for government procurement eligibility
- Compatible with Pelco Sarix Value 2 (SRXV2) camera systems
Special Order · Ships in 2-3 weeks

$47.25 $46.99 Save $0.26

Add to Cart
The item has been added
Free shipping over $499

$47.25 $46.99 Save $0.26

Add to quote Compare
Compare

Out of stock
Pelco

SKU: SRXV2-PDCP-1001

Pelco SRXV2-PDCP-1001 Pendant Cap Adapter Outdoor

Pendant cap adapter for outdoor Sarix Value 2 dome cameras, IP66-rated
- Connects pendant arm, cap, and camera body with weather-sealed IP66 construction
- Compatible with Sarix Value 2 (SRXV2) dome cameras in outdoor pendant setups
- NDAA Section 889 compliant for government and secure facility deployments
Special Order · Ships in 2-3 weeks

$131.25 $130.99 Save $0.26

Add to Cart
The item has been added
Free shipping over $499

$131.25 $130.99 Save $0.26

Add to quote Compare
Compare

Out of stock
Pelco

SKU: SRXV2-PDCP-1002

Pelco SRXV2-PDCP-1002 Pendant Cap Adapter Indoor

Pendant cap adapter for Sarix Value 2 indoor dome installations
- Connects pendant arm to camera mount for angled-pendant configurations
- IP66 rated for indoor use with NDAA Section 889 compliance
- Requires matching pendant arm and cap assembly for proper fit
Special Order · Ships in 2-3 weeks

$120.75 $119.99 Save $0.76

Add to Cart
The item has been added
Free shipping over $499

$120.75 $119.99 Save $0.76

Add to quote Compare
Compare

Out of stock
Pelco

SKU: SRXV2-PDMT-1001

Pelco SRXV2-PDMT-1001 Pendant Mount Bracket

Pendant mount bracket for Sarix Value 2 domes in high-ceiling spaces
- Adjustable arm lowers camera from elevated ceilings to improve resolution
- Interior cable routing through pendant stem simplifies finished ceiling install
- Compatible with Sarix Value 2 dome cameras, NDAA Section 889 compliant
Special Order · Ships in 2-3 weeks

$173.25 $137.99 Save $35.26

Add to Cart
The item has been added
Free shipping over $499

$173.25 $137.99 Save $35.26

Add to quote Compare
Compare

Out of stock
Pelco

SKU: SRXV2-PDNT-1001

Pelco SRXV2-PDNT-1001 Pendant Cap Wall Wedge

Fixed-angle wall wedge for Sarix Value 2 pendant dome cameras
- Redirects pendant-mounted camera view across corridors and stairwells
- Fixed wedge angle optimizes coverage for wall-adjacent ceiling installations
- NDAA Section 889 compliant; indoor use; 1-year warranty
Special Order · Ships in 2-3 weeks

$94.50 $93.99 Save $0.51

Add to Cart
The item has been added
Free shipping over $499

$94.50 $93.99 Save $0.51

Add to quote Compare
Compare

Add to Cart The item has been added
Pelco

SKU: SRXV2-PDNT-1002

Pelco SRXV2-PDNT-1002 Outdoor Pendant Cap Wedge

IP66 wall wedge pendant cap for angled exterior SRXV2 mounts
- Fixed wedge angle corrects aim geometry on exterior walls and soffits
- IP66-rated housing withstands weather exposure on covered structures
- Compatible with Pelco SRXV2 pendant arm and cap assemblies
Special Order · Ships in 2-3 weeks

$115.50 $114.99 Save $0.51

Add to Cart
The item has been added
Free shipping over $499

$115.50 $114.99 Save $0.51

Add to cart Add to quote Compare
Compare

Out of stock
Pelco

SKU: SRXV2-PLMT-1001

Pelco SRXV2-PLMT-1001 Pole Mount Bracket

Pole mount bracket for Sarix Value 2 cameras in parking lots and utility poles
- Cylindrical pole clamp design fits standard poles with secure, adjustable installation
- NDAA Section 889 compliant for government and regulated surveillance deployments
- Outdoor-rated for parking areas, light standards, and perimeter zone monitoring
Special Order · Ships in 2-3 weeks

$115.50 $114.99 Save $0.51

Add to Cart
The item has been added
Free shipping over $499

$115.50 $114.99 Save $0.51

Add to quote Compare
Compare

Out of stock
Pelco

SKU: SRXV2-SLD-1001

Pelco SRXV2-SLD-1001 Outdoor Sunshield

IP66 sunshield for SRXV2 cameras — blocks lens flare and heat stress
- Tool-free direct mount to Sarix Value 2 camera body, no modifications needed
- IP66 weatherproof rating withstands outdoor rain, dust, and direct sunlight exposure
- Reduces thermal stress on lens and camera body in high-sun installations
Special Order · Ships in 2-3 weeks

$49.35 $39.99 Save $9.36

Add to Cart
The item has been added
Free shipping over $499

$49.35 $39.99 Save $9.36

Add to quote Compare

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Pelco SRXV2-FCMNT-1002 In-Ceiling Mount

Pelco SRXV2-JBX-1001 Indoor Junction Box

Pelco SRXV2-JBX-1002 Junction Box Sarix Value 2

Pelco SRXV2-JBX-1003 Outdoor Junction Box

Pelco SRXV2-LD-0E Tinted Outdoor Dome Bubble

Pelco SRXV2-LD-0I Tinted Indoor Dome Bubble

Pelco SRXV2-LD-1E Clear Outdoor Dome Bubble

Pelco SRXV2-LD-1I Clear Indoor Dome Cover

Pelco SRXV2-LMT-1001 L-Mount Bracket

Pelco SRXV2-PDCP-1001 Pendant Cap Adapter Outdoor

Pelco SRXV2-PDCP-1002 Pendant Cap Adapter Indoor

Pelco SRXV2-PDMT-1001 Pendant Mount Bracket

Pelco SRXV2-PDNT-1001 Pendant Cap Wall Wedge

Pelco SRXV2-PDNT-1002 Outdoor Pendant Cap Wedge

Pelco SRXV2-PLMT-1001 Pole Mount Bracket

Pelco SRXV2-SLD-1001 Outdoor Sunshield

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading