IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
Pelco

SKU: OMPXSPA

Pelco OMPXSPA Replacement Wiper Blade for MPX Housing

OEM wiper blade for Pelco MPX housings; engineered rubber for rain and condensation
- Genuine replacement part with engineered geometry matched to MPX window curvature
- Rubber construction resists UV and temperature cycling for sustained clarity
- NDAA Section 889 compliant and TAA-eligible for federal surveillance deployments
Special Order · Ships in 2-3 weeks

$64.09 $47.99 Save $16.10

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: ONXAB1025B

Pelco ONXAB1025B NX Air Barrier IR-Proof Glass

IR-proof glass with pressurized air barrier for NX Series housings
- IR-proof glass eliminates internal reflection artifacts from IR illuminators
- Pressurized air gap prevents condensation on lens port window
- Compatible with Pelco NX Series camera housings; requires clean dry air supply
Special Order · Ships in 2-3 weeks

$1,085.88 $798.99 Save $286.89

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: ONXAB2

Pelco ONXAB2 NX Series Air Barrier Tempered Glass Window

Active air barrier window for NX Series housings in extreme weather
- Tempered glass with compressed air flow prevents condensation and ice buildup
- Protects optical clarity in coastal salt spray and industrial environments
- Fits Pelco NX Series NXW camera housings with standard air supply connection
Special Order · Ships in 2-3 weeks

$490.91 $360.99 Save $129.92

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: ONXMAIRB

Pelco ONXMAIRB NXM36 Air Barrier Tempered Glass

Tempered glass air barrier for NXM36 housing—stops condensation and ice
- Compressed air circulation prevents fog and ice buildup in cold, humid conditions
- Tempered glass with IP66/IP67 rating blocks dust, salt spray, and airborne debris
- NXM36 housing only; pairs with NXFIGRU2 filtering group for optimal performance
Special Order · Ships in 2-3 weeks

$602.97 $443.99 Save $158.98

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: ONXMAIRBIR

Pelco ONXMAIRBIR NXM36 Air Barrier IR-Proof Glass

IR-proof glass air barrier for NXM36 housings—eliminates reflection haze
- IR-proof optical glass removes internal reflection artifacts from integrated IR
- Pressurized air gap prevents condensation in wet or humid environments
- Designed for NXM36 Series stainless steel housings; NDAA Section 889 compliant
Special Order · Ships in 2-3 weeks

$1,197.93 $880.99 Save $316.94

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: ONXPS1B

Pelco ONXPS1B Universal Power Supply 12Vdc

12Vdc regulated supply for Pelco ONX cameras, 100–240Vac worldwide input
- Auto-sensing 100–240 Vac input handles North American and European mains
- 12 Vdc regulated output supports ONX-series camera systems reliably
- NDAA Section 889 compliant for government and critical infrastructure use
Special Order · Ships in 2-3 weeks

$54.43 $40.99 Save $13.44

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: ONXPS2B

Pelco ONXPS2B 230Vac to 24Vac Power Supply

230Vac to 24Vac regulated supply for Pelco ONX cameras
- Converts European 230Vac mains to stable 24Vac output for ONX systems
- Compact enclosure-mount design for professional surveillance installations
- Integrated voltage regulation and current management for camera accessories
Special Order · Ships in 2-3 weeks

$46.16 $33.99 Save $12.17

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: ONXWPS1B

Pelco ONXWPS1B Power Supply 100-240Vac to 12Vdc

Universal 100–240Vac to 12Vdc supply for Pelco NXW/NTW housings
- Wide-range AC input eliminates voltage selector configuration needs
- 12Vdc regulated output supports NXW and NTW-series camera housings
- NDAA Section 889 compliant for government and enterprise deployments
Special Order · Ships in 2-3 weeks

$54.83 $40.99 Save $13.84

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Pelco

SKU: ONXWQG

Pelco ONXWQG NX Series Quartz Glass Front Window

Quartz glass window for Pelco NX housings resists chemical pitting
- Quartz glass construction resists solvents, caustic cleaners, and etching
- Direct fit for Pelco NX Series outdoor housings with proper sealing
- Tolerates harsh industrial environments where standard glass degrades
In stock · Ships same business day

$897.99

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: ONXWTG

Pelco ONXWTG Tempered Glass Window NX Housing

Tempered glass window for Pelco NX-series housings with impact resistance
- Tempered glass construction resists impact damage while maintaining optical clarity
- IP66/IP67 rated for demanding surveillance environments with IR low-light capability
- NDAA Section 889 compliant for government and regulated deployments
Special Order · Ships in 2-3 weeks

$30.55 $22.99 Save $7.56

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: OPTACWBS_FLIR

Pelco OPTACWBS_FLIR Screw Kit PTACWBSQ2B Bracket

OEM fastener kit for PTACWBSQ2B FLIR thermal brackets
- Precision-matched thread pitch and corrosion-resistant material for secure mounting
- Includes torque specifications aligned with Pelco bracket installation standards
- Engineered exclusively for PTACWBSQ2B to prevent thread damage and galvanic corrosion
Special Order · Ships in 2-3 weeks

$10.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Pelco

SKU: OSPAHEG

Pelco OSPAHEG Wiper Blade for OHEG Housing

Replacement wiper blade for Pelco OHEG outdoor camera housings
- Direct fit for VIPGA1-2 wiper assembly on OHEG Series housings
- Removes rain, condensation, and debris to maintain optical clarity
- Consumable replacement blade for scheduled preventive maintenance
In stock · Ships same business day

$116.30 $85.99 Save $30.31

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: OSUPPIR

Pelco OSUPPIR Mounting Bracket for GEKO IRH

OEM bracket for GEKO IRH infrared illuminators—co-mounted or independent
- Precision-engineered structural bracket for secure camera and illuminator alignment
- Supports co-mounted or independent positioning across Pelco surveillance systems
- NDAA Section 889 compliant for government and enterprise deployments
Special Order · Ships in 2-3 weeks

$27.99

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: OWBIP2

Pelco OWBIP2 IP66 Gasket Kit for Camera Brackets

IP66 gasket kit seals outdoor bracket cable and wall interfaces
- IP66-rated elastomer gaskets prevent moisture at cable entry points
- Compatible with Pelco WBOVA2 and WCM4A2 wall-mount brackets
- NDAA Section 889 compliant for regulated surveillance deployments
Special Order · Ships in 2-3 weeks

$10.99

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: OWBIP3

Pelco OWBIP3 IP66 Gasket Kit Camera Housing

IP66 gasket kit seals bracket-to-wall interface on WBOVA2/WCM4A2
- IP66-rated gasket prevents water ingress at bracket and cable entry points
- Compatible with WBOVA2 and WCM4A2 Pelco wall-mount camera brackets
- NDAA Section 889 compliant for government and regulated facility deployments
Special Order · Ships in 2-3 weeks

$10.67 $7.99 Save $2.68

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Pelco

SKU: PA101

Pelco PA101 Pole Mount Adapter for PM14

PM14 pole mount adapter for cylindrical outdoor installations
- Converts PM14 wall mount to pole configuration without additional brackets
- Supports standard 1.5"–2.5" diameter poles in outdoor parking and perimeter
- Engineered for lateral wind loads and vibration on pole-mounted systems
In stock · Ships same business day

$74.57 $52.99 Save $21.58

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Pelco OMPXSPA Replacement Wiper Blade for MPX Housing

Pelco ONXAB1025B NX Air Barrier IR-Proof Glass

Pelco ONXAB2 NX Series Air Barrier Tempered Glass Window

Pelco ONXMAIRB NXM36 Air Barrier Tempered Glass

Pelco ONXMAIRBIR NXM36 Air Barrier IR-Proof Glass

Pelco ONXPS1B Universal Power Supply 12Vdc

Pelco ONXPS2B 230Vac to 24Vac Power Supply

Pelco ONXWPS1B Power Supply 100-240Vac to 12Vdc

Pelco ONXWQG NX Series Quartz Glass Front Window

Pelco ONXWTG Tempered Glass Window NX Housing

Pelco OPTACWBS_FLIR Screw Kit PTACWBSQ2B Bracket

Pelco OSPAHEG Wiper Blade for OHEG Housing

Pelco OSUPPIR Mounting Bracket for GEKO IRH

Pelco OWBIP2 IP66 Gasket Kit for Camera Brackets

Pelco OWBIP3 IP66 Gasket Kit Camera Housing

Pelco PA101 Pole Mount Adapter for PM14

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading

Certified Experts

Manufacturer Authorized

Expert Access

Since 2014

Brands

Categories

IP Cameras

Ordering

Legal

Company

Sales & Expert Advice

Customer Service