IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
Pelco

SKU: EXC2602-62-A4

Pelco EXC2602-62-A4 6MP Explosion-Proof Camera 4m Cable

6MP explosion-proof camera with 4m cable for ATEX Zone 1/21 hazardous areas
- 6MP resolution at 30 fps with 4.9–8mm motorized varifocal lens and IR night vision
- 316L stainless steel housing rated IP69/IP68; operates -40°C to +60°C in extreme conditions
- PoE Class 3 power via factory-terminated cable; H.265 compression and ONVIF compliance
Special Order · Ships in 2-3 weeks

$2,816.99

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: EXHC003G

Pelco EXHC003G ExSite Thermal Housing Heater 24Vac

24Vac heater for thermal housings in cold climates, explosion-proof rated
- Prevents condensation on thermal optics in sub-zero environments
- IP66 rated for outdoor durability and harsh weather exposure
- Explosion-proof certified for hazardous industrial installations
Special Order · Ships in 2-3 weeks

$22,624.64 $16,635.99 Save $5,988.65

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Pelco

SKU: EXHC003R

Pelco EXHC003R ExSite Thermal Housing 3-Heater

Thermal housing with triple heaters for extreme cold operation
- Three integrated heaters maintain sensor performance in sub-freezing conditions
- 24Vac power input integrates with existing low-voltage surveillance infrastructure
- IP66 weatherproof rating handles rain, dust, and high-pressure wash-down
In stock · Ships same business day

$2,798.99

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: EXHC203R

Pelco EXHC203R ExSite Thermal Housing 3-Heater

Triple-heater thermal housing for extreme cold surveillance
- Three integrated heaters maintain camera operation in arctic conditions
- IP66 weatherproof rating protects electronics and optics from moisture
- ONVIF-compatible with H.265/H.264 support for standard integrations
Special Order · Ships in 2-3 weeks

$2,251.79 $1,655.99 Save $595.80

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: EXHS000

Pelco EXHS000 Sun Shield 640mm Housing Accessory

640mm sun shield for EXHC housings cuts solar heat loading in hot climates
- 640mm full-length coverage reduces internal peak temperatures on south/west-facing positions
- Lowers blower demand and operational stress on camera electronics in direct sunlight
- White engineered thermal shield construction, NDAA Section 889 compliant
Special Order · Ships in 2-3 weeks

$143.27 $105.99 Save $37.28

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: EXPRO1CABLARM101

Pelco EXPRO1CABLARM101 10m Armored Cable

10m armored cable for ExSite Pro cameras in harsh outdoor sites
- Mechanical armor jacket protects conductors from damage and rodent interference
- Barrier gland sealed entry prevents moisture and dust ingress at housing
- Built for industrial, hazardous, and exposed outdoor environments
Special Order · Ships in 2-3 weeks

$1,512.76 $1,112.99 Save $399.77

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: EXPRO1CABLARM41

Pelco EXPRO1CABLARM41 4m Armored Cable

4m armored cable for ExSite Pro cameras in harsh outdoor/industrial sites
- Armored construction shields against mechanical damage and rodent intrusion
- Integral barrier gland seals conduit entry in exposed routing applications
- ONVIF Profile S & T compliant; NDAA Section 889 approved for regulated sectors
Special Order · Ships in 2-3 weeks

$1,009.84 $742.99 Save $266.85

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: FM1010

Pelco FM1010 EMC Filter Marine Certified

EMC filter for marine-certified camera power with DNV/Lloyd's/ABS compliance
- Suppresses conducted electromagnetic interference on power feed lines
- DNV, Lloyd's, and ABS marine certification for regulated deployments
- SOLAS and NDAA Section 889 compliant for government/commercial vessels
Special Order · Ships in 2-3 weeks

$50.70 $37.99 Save $12.71

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: GROM-1001

Pelco GROM-1001 Camera Housing Sealing Grommet 10-Pack

OEM cable entry sealing grommets for Pelco camera housings
- 10-pack elastomer grommets with optimized durometer for moisture protection
- Factory-matched bore diameter prevents cable compression and seal failure
- Field-stock essential for outdoor installations and maintenance operations
Special Order · Ships in 2-3 weeks

$18.06 $13.99 Save $4.07

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: HEB32K0A000B

Pelco HEB32K0A000B Camera Housing 320mm Sun Shield

Integrated 320mm sun shield housing cuts peak temps 10–15°C
- IP66/IP67 rated outdoor housing with passive thermal management
- 320mm integrated sun shield eliminates separate accessory purchase
- Compatible with Pelco camera systems; NDAA Section 889 compliant
Special Order · Ships in 2-3 weeks

$163.68 $120.99 Save $42.69

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: HEB32K1A000B

Pelco HEB32K1A000B 320mm Outdoor Housing

320mm outdoor housing for extended lens assemblies, IP66 rated
- 320mm internal length accommodates longer camera and lens combinations
- Dual voltage 120/230 Vac with integrated heater and sun shield
- IP66 enclosure with NDAA Section 889 compliance for government use
Special Order · Ships in 2-3 weeks

$198.77 $146.99 Save $51.78

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: HEB32K2A000B

Pelco HEB32K2A000B 320mm Outdoor Housing

320mm outdoor housing for extended Pelco camera and lens combinations
- IP66 weatherproof with integrated sun shield and heater for year-round use
- Accepts 12Vdc or 24Vac input for flexible power infrastructure compatibility
- 320mm length accommodates professional-grade extended optical assemblies
Special Order · Ships in 2-3 weeks

$198.77 $146.99 Save $51.78

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: HEG37K1A000

Pelco HEG37K1A000 365mm Outdoor Camera Housing

365mm outdoor housing with thermostat heater and IP66 protection
- Dual voltage 120/230Vac input supports North American and international deployments
- Integrated sun shield and thermostat-controlled heater for year-round operation
- IP66-rated construction withstands harsh outdoor environments and moisture exposure
Special Order · Ships in 2-3 weeks

$280.14 $205.99 Save $74.15

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: HEG37K1A074

Pelco HEG37K1A074 365mm Dual Heater Camera Housing

Extreme cold housing with dual heaters for −40°C+ surveillance
- Dual internal heaters accelerate warm-up in arctic deployments
- 365mm length fits larger camera/lens assemblies with integrated sun shield
- 120/230 Vac dual voltage input works globally; IP66/IP67 rated
Special Order · Ships in 2-3 weeks

$336.17 $247.99 Save $88.18

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Pelco

SKU: HEG37K2A000

Pelco HEG37K2A000 365mm Outdoor Housing

365mm outdoor housing for extended lens assemblies with integrated heater
- IP66-rated with sun shield and heater to prevent condensation and fogging
- Accepts 12 VDC or 24 VAC power for flexible retrofit into existing infrastructure
- 365mm frame accommodates longer camera and lens combinations standard housings reject
In stock · Ships same business day

$308.99

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: HEG47K1A000

Pelco HEG47K1A000 450mm Outdoor Housing

450mm outdoor housing with dual-voltage AC and IP66 weather protection
- Integrated sun shield and heater manage temperature swings year-round
- 120/230 Vac dual-voltage input works globally without power conversion
- IP66-rated weatherproof design for harsh outdoor surveillance deployments
Special Order · Ships in 2-3 weeks

$297.48 $218.99 Save $78.49

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Pelco EXC2602-62-A4 6MP Explosion-Proof Camera 4m Cable

Pelco EXHC003G ExSite Thermal Housing Heater 24Vac

Pelco EXHC003R ExSite Thermal Housing 3-Heater

Pelco EXHC203R ExSite Thermal Housing 3-Heater

Pelco EXHS000 Sun Shield 640mm Housing Accessory

Pelco EXPRO1CABLARM101 10m Armored Cable

Pelco EXPRO1CABLARM41 4m Armored Cable

Pelco FM1010 EMC Filter Marine Certified

Pelco GROM-1001 Camera Housing Sealing Grommet 10-Pack

Pelco HEB32K0A000B Camera Housing 320mm Sun Shield

Pelco HEB32K1A000B 320mm Outdoor Housing

Pelco HEB32K2A000B 320mm Outdoor Housing

Pelco HEG37K1A000 365mm Outdoor Camera Housing

Pelco HEG37K1A074 365mm Dual Heater Camera Housing

Pelco HEG37K2A000 365mm Outdoor Housing

Pelco HEG47K1A000 450mm Outdoor Housing

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading

Certified Experts

Manufacturer Authorized

Expert Access

Since 2014

Brands

Categories

IP Cameras

Ordering

Legal

Company

Sales & Expert Advice

Customer Service