IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
Honeywell

SKU: PRO42OUT

Honeywell PRO42OUT Output Board Mobile Computer Accessory

Wired output board for Honeywell mobile computer integration
- Fixed-installation connectivity for warehouse and logistics deployments
- Wired connection eliminates wireless interference in secure facilities
- Integrates with Honeywell Commercial Security platforms and systems
Special Order · Ships in 2-3 weeks

$789.99 $774.99 Save $15.00

Add to Cart
The item has been added
Compare

Out of stock
Honeywell

SKU: PRO42R1

Honeywell PRO42R1 Single Reader Board

Single reader board for Honeywell mobile computers with wired connectivity
- Wired connection eliminates interference for stable access control operation
- Integrates with Honeywell mobile computer platforms and security infrastructure
- Reader board component for custom integrations and retrofit deployments
Special Order · Ships in 2-3 weeks

$342.99 $335.99 Save $7.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Honeywell

SKU: PRO42R2B

Honeywell PRO42R2B Dual Reader Access Control Board

Dual-channel OSDP reader board for simultaneous credential processing
- Two readers process credentials at the same time, eliminating queue delays in high-traffic access points
- OSDP protocol works with any compliant reader brand, avoiding vendor lock-in
- Wired integration with Honeywell PRO4200 series controllers for consolidated multi-reader setups
In stock · Ships same business day

$715.99 $701.99 Save $14.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Honeywell

SKU: PW5K2ENC1

Honeywell PW5K2ENC1 Mobile Computer

Wired mobile computer for field security and asset management ops
- Wired connectivity for persistent data links in warehouse deployments
- High-density form factor designed for portable field operations
- Integrates with Honeywell commercial security ecosystems and platforms
In stock · Ships same business day

$500.99 $490.99 Save $10.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Honeywell

SKU: PW5K2ENC2

Honeywell PW5K2ENC2 High-Density Enclosure

High-density wired enclosure for simultaneous multi-device charging and sync
- Multiple device docking in single footprint—reduces floor space in command centers
- Wired-only connectivity eliminates RF interference and wireless network dependency
- Integrates with Honeywell commercial security ecosystem for centralized management
In stock · Ships same business day

$522.99 $512.99 Save $10.00

Add to Cart
The item has been added
Compare

Out of stock
Honeywell

SKU: QM3500SPACER

Honeywell QM3500SPACER Mount Bracket

Genuine OEM spacer for Honeywell QM3500 series mobile devices
- Maintains manufacturer coverage for QM3500-compatible scanning equipment
- Designed for 24/7 warehouse, distribution, and field service operations
- Standardizes fleet accessory procurement and reduces downtime risk
Special Order · Ships in 2-3 weeks

$0.99

Add to Cart
The item has been added
Compare

Out of stock
Honeywell

SKU: RAM-B-166-202U

Honeywell RAM-B-166-202U Mount Bracket

OEM mount bracket for Honeywell enterprise mobile devices
- Genuine Honeywell accessory engineered for warehouse, distribution, and field service
- Industrial-grade construction designed for 24/7 multi-shift operations
- Maintains full manufacturer coverage and eliminates compatibility concerns
Special Order · Ships in 2-3 weeks

$50.99

Add to Cart
The item has been added
Compare

Out of stock
Honeywell

SKU: REM-CLIENT-MOB-3YR

Honeywell REM-CLIENT-MOB-3YR Remote Management Client License

3-year remote management license for Honeywell mobile scanning fleets
- Remote configuration, diagnostics, and firmware updates across devices
- Centralized fleet-wide management reduces operational overhead
- 3-year term eliminates recurring annual licensing interruptions
Special Order · Ships in 2-3 weeks

$83.99 $82.99 Save $1.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Honeywell

SKU: RT10-2012BRKTKIT

Honeywell RT10-2012BRKTKIT CT47 Mounting Bracket Kit

Secure mounting bracket kit for Honeywell CT47 mobile computers
- Supports multiple orientations for vehicles, workstations, and field environments
- Compatible with CT47's 5.5" FHD display and Qualcomm QCS6490 processor
- Durable construction maintains device accessibility during multi-shift operations
In stock · Ships same business day

$399.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Honeywell

SKU: RT10-2015BRKTKIT

Honeywell RT10-2015BRKTKIT CT47 Mounting Bracket Kit

Secure mounting bracket kit for Honeywell CT47 mobile computers
- Integrates CT47's Qualcomm QCS6490 octa-core processor and 8GB RAM into vehicle and workstation deployments
- IP65-rated CT47 with 5.5-inch FHD display and Gorilla Glass 5 for outdoor field operations
- Quick-attach design supports WiFi 6E and 5G connectivity for enterprise mobility workflows
In stock · Ships same business day

$450.99

Add to Cart
The item has been added
Compare

Out of stock
Honeywell

SKU: RT10-IGNITION-CABL

Honeywell RT10-IGNITION-CABL CT47 Ignition Cable

Vehicle ignition cable for CT47 with automatic activation & charging
- Integrates with vehicle ignition to auto-activate CT47 during operation
- Genuine Honeywell OEM accessory; maintains CT47 manufacturer compatibility
- Eliminates manual power-on in fleet deployments; 1-year warranty included
Special Order · Ships in 2-3 weeks

$111.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Honeywell

SKU: RT10-MNT-RAM

Honeywell RT10-MNT-RAM Ball Mount for CT47

RAM ball mount for Honeywell CT47 mobile computer
- Adjustable positioning for CT47 dashboard, wall, and equipment mounting
- Durable construction rated for vibration-prone field environments
- Compatible with CT47's IP65-rated 5.5-inch FHD rugged display
In stock · Ships same business day

$104.99

Add to Cart
The item has been added
Compare

Out of stock
Honeywell

SKU: RT10-MNT-RAM-C

Honeywell RT10-MNT-RAM-C RAM Mount Ball for CT47

RAM ball mount for Honeywell CT47 mobile computer
- Adjustable positioning for vehicle, equipment, and workstation mounting
- Maintains full port and sensor access on CT47 device
- Durable polymer/metal construction for field and warehouse use
Special Order · Ships in 2-3 weeks

$104.99

Add to Cart
The item has been added
Compare

Out of stock
Honeywell

SKU: RT10-MNT-VS

Honeywell RT10-MNT-VS CT47 Mobile Computer Mount

Vehicle mount for Honeywell CT47 mobile computer with durable polymer construction
- Engineered polymer construction rated for 24/7 multi-shift enterprise warehouse and field operations
- Maintains full manufacturer warranty and ensures mechanical compatibility with CT47 platform
- Supports CT47's IP65 rating, 5.5-inch FHD display, and WiFi 6E + 5G connectivity in mounted workflows
Special Order · Ships in 2-3 weeks

$153.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Honeywell

SKU: RT10-PWR

Honeywell RT10-PWR Power Supply for CT47 Mobile Computer

2-bay charger with 19V power for Honeywell CT47 mobile computers
- Supports continuous 24/7 operation in warehouse, distribution, and field deployments
- Charges CT47 devices with 8GB RAM, 128GB storage, Qualcomm QCS6490 processor
- IP65-rated, 1.8m drop-tested device compatibility with day/night vision capability
In stock · Ships same business day

$125.88 $90.99 Save $34.89

Add to Cart
The item has been added
Compare

Out of stock
Honeywell

SKU: RT10-PWR-CABLE-EU

Honeywell RT10-PWR-CABLE-EU Power Cable for CT47

OEM power cable for Honeywell CT47 with EU connector configuration
- Delivers reliable charging for 24/7 warehouse and field operations
- Industrial-grade construction built for demanding enterprise environments
- OEM-certified connector matches CT47 mobile computer specifications
Special Order · Ships in 2-3 weeks

$35.99

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Honeywell PRO42OUT Output Board Mobile Computer Accessory

Honeywell PRO42R1 Single Reader Board

Honeywell PRO42R2B Dual Reader Access Control Board

Honeywell PW5K2ENC1 Mobile Computer

Honeywell PW5K2ENC2 High-Density Enclosure

Honeywell QM3500SPACER Mount Bracket

Honeywell RAM-B-166-202U Mount Bracket

Honeywell REM-CLIENT-MOB-3YR Remote Management Client License

Honeywell RT10-2012BRKTKIT CT47 Mounting Bracket Kit

Honeywell RT10-2015BRKTKIT CT47 Mounting Bracket Kit

Honeywell RT10-IGNITION-CABL CT47 Ignition Cable

Honeywell RT10-MNT-RAM Ball Mount for CT47

Honeywell RT10-MNT-RAM-C RAM Mount Ball for CT47

Honeywell RT10-MNT-VS CT47 Mobile Computer Mount

Honeywell RT10-PWR Power Supply for CT47 Mobile Computer

Honeywell RT10-PWR-CABLE-EU Power Cable for CT47

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading

Certified Experts

Manufacturer Authorized

Expert Access

Since 2014

Brands

Categories

IP Cameras

Ordering

Legal

Company

Sales & Expert Advice

Customer Service