IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
Honeywell

SKU: HF800HD-R1-1H

Honeywell HF800HD-R1-1H Fixed Mount Barcode Scanner

Fixed-mount 1D barcode scanner rated IP42 for outdoor and harsh environments
- Linear imager optimized for 1D barcode decoding in warehouse and logistics operations
- IP42 rated enclosure protects against dust and moisture in indoor or outdoor deployment
- RS-232 and USB connectivity integrates with legacy and modern host systems
Special Order · Ships in 2-3 weeks

$1,275.34 $945.99 Save $329.35

Add to Cart
The item has been added
Compare

Out of stock
Honeywell

SKU: HF800HD-R1-1V

Honeywell HF800HD-R1-1V Fixed-Mount Barcode Scanner

Fixed-mount 1D scanner with IP42 housing for outdoor industrial use
- Linear imager reads 1D barcodes on damaged or poorly printed labels
- IP42 sealed housing withstands dust and moisture in warehouse environments
- Ethernet, RS-232, and USB connectivity integrates with existing systems
Special Order · Ships in 2-3 weeks

$1,275.34 $945.99 Save $329.35

Add to Cart
The item has been added
Compare

Out of stock
Honeywell

SKU: HF800SR-R1-1H

Honeywell HF800SR-R1-1H Fixed Mount Barcode Scanner

Fixed mount 1D scanner with IP42 rating for industrial warehouse use
- Linear imager reads 1D barcodes up to 400 mm with consistent decode
- IP42 dust and moisture protection rated for outdoor-ready conditions
- Corded RS-232/USB connectivity integrates into Windows enterprise systems
Special Order · Ships in 2-3 weeks

$1,275.34 $945.99 Save $329.35

Add to Cart
The item has been added
Compare

Out of stock
Honeywell

SKU: HF800SR-R1-1V

Honeywell HF800SR-R1-1V Fixed Mount Barcode Scanner

Fixed-mount 1D scanner with IP42 rating for warehouse and manufacturing
- Linear imager decodes 1D barcodes including damaged and high-density codes
- IP42 dust and moisture protection rated for outdoor-ready harsh environments
- RS-232/USB connectivity integrates with warehouse and retail management systems
Special Order · Ships in 2-3 weeks

$1,275.34 $945.99 Save $329.35

Add to Cart
The item has been added
Compare

Out of stock
Honeywell

SKU: HF810-01BT00004K-R

Honeywell HF810-01BT00004K-R Fixed Mount Barcode Scanner

Fixed-mount 1D scanner with IP42 rating for warehouse and logistics
- 2MP imaging sensor reads damaged and poorly printed 1D barcodes reliably
- RS-232/USB wired connectivity integrates with legacy and modern host systems
- IP42-rated, 0.4 lb design rated for outdoor covered applications, 0°–50°C
Special Order · Ships in 2-3 weeks

$1,593.90 $1,182.99 Save $410.91

Add to Cart
The item has been added
Compare

Out of stock
Honeywell

SKU: HF810-01RT00004K-R

Honeywell HF810-01RT00004K-R Fixed Mount Barcode Scanner

Fixed-mount 1D scanner with 2MP imaging for warehouse and logistics
- 2MP linear imager decodes standard, damaged, and high-density 1D barcodes
- IP42 rated enclosure resists warehouse dust, moisture, and splashes
- RS-232 and USB connectivity works with legacy and modern control systems
Special Order · Ships in 2-3 weeks

$1,593.90 $1,182.99 Save $410.91

Add to Cart
The item has been added
Compare

Out of stock
Honeywell

SKU: HF810-11BT00004K-R

Honeywell HF810-11BT00004K-R Fixed Mount Barcode Scanner

Fixed 1D barcode scanner with IP42 dust/splash protection for industrial automation
- 2MP linear imager for sharp 1D barcode capture across warehouse and manufacturing floors
- IP42-rated enclosure withstands dust and moisture in production environments
- RS-232/USB wired connectivity with 0.4 lb weight for flexible conveyor or dock mounting
Special Order · Ships in 2-3 weeks

$1,593.90 $1,182.99 Save $410.91

Add to Cart
The item has been added
Compare

Out of stock
Honeywell

SKU: HF810-11RT00004K-R

Honeywell HF810-11RT00004K-R Fixed Mount Barcode Scanner

Fixed-mount 1D scanner with IP42 rating for industrial barcode capture
- 2MP linear imager reads 1D barcodes across varying print quality and density
- IP42 dust and moisture protection for warehouse, manufacturing, and production floors
- RS-232/USB wired connectivity with lightweight 0.4 lbs form factor for easy mounting
Special Order · Ships in 2-3 weeks

$1,593.90 $1,182.99 Save $410.91

Add to Cart
The item has been added
Compare

Out of stock
Honeywell

SKU: HF811-01BT00004K-R

Honeywell HF811-01BT00004K-R Fixed Mount Barcode Scanner

Fixed-mount 1D scanner with IP42 dust/moisture protection for warehouse use
- 2MP imaging sensor reads 1D barcodes up to 400 mm with aggressive decode
- IP42 rated construction handles dust and occasional moisture in industrial settings
- Wired RS-232/USB connectivity integrates directly with warehouse systems
Special Order · Ships in 2-3 weeks

$1,821.60 $1,351.99 Save $469.61

Add to Cart
The item has been added
Compare

Out of stock
Honeywell

SKU: HF811-01RT00004K-R

Honeywell HF811-01RT00004K-R Fixed Mount Barcode Scanner

Fixed-mount 1D barcode scanner with 2MP imaging and IP42 protection
- 2MP linear imager decodes standard, damaged, and high-density 1D barcodes
- Read distance up to 400mm with RS-232/USB connectivity for flexible mounting
- IP42 rating withstands dust and moisture in warehouse and manufacturing settings
Special Order · Ships in 2-3 weeks

$1,821.60 $1,351.99 Save $469.61

Add to Cart
The item has been added
Compare

Out of stock
Honeywell

SKU: HF811-11BT00004K-R

Honeywell HF811-11BT00004K-R Fixed Mount Barcode Scanner

Fixed 1D barcode scanner with IP42 protection for warehouse and retail
- 2MP linear imager captures 1D codes in standard and damaged conditions
- IP42 rated housing resists dust and moisture spray on production floors
- RS-232/USB corded connection integrates with legacy and modern systems
Special Order · Ships in 2-3 weeks

$1,821.60 $1,351.99 Save $469.61

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Honeywell

SKU: HF811-11RT00004K-R

Honeywell HF811-11RT00004K-R Fixed Mount Linear Imager 1D Barcode Scanner

Fixed-mount 1D imager for hands-free conveyor barcode capture
- 2MP resolution reads damaged labels and high-density codes reliably
- 400 mm read distance works overhead or counter-level without refocus
- RS-232/USB wired connectivity with IP42 rating for warehouse floors
In stock · Ships same business day

$1,821.60 $1,351.99 Save $469.61

Add to Cart
The item has been added
Compare

Out of stock
Honeywell

SKU: HF8ACC-BRACKET-01

Honeywell HF8ACC-BRACKET-01 CT47 Mounting Bracket

CT47 mounting bracket for vehicle and stationary warehouse setups
- Secure installation with full access to ports, camera, and controls
- Durable construction rated for continuous multi-shift operations
- Compatible with Honeywell CT47 mobile computer across field service roles
Special Order · Ships in 2-3 weeks

$9.99

Add to Cart
The item has been added
Compare

Out of stock
Honeywell

SKU: HF8TCB-ETHER-002

Honeywell HF8TCB-ETHER-002 Scanner I/O Cable

Ethernet I/O cable for Xenon XP 1952g with IP65 durability
- Wired Ethernet connectivity for centralized network management
- IP65-rated construction withstands dust and water in industrial settings
- Engineered for scanners rated to survive 2.0 m drops
Special Order · Ships in 2-3 weeks

$54.99

Add to Cart
The item has been added
Compare

Out of stock
Honeywell

SKU: HF8TCB-ETHER-005

Honeywell HF8TCB-ETHER-005 Xenon XP Scanner Cable

Ethernet PoE cable for Xenon XP 1952g scanners with IP65 durability
- Ethernet + Power over Ethernet Class 2 for simplified network deployment
- IP65 rated and 2.0 m drop tested for warehouse and distribution use
- Connects 1D/2D area imager to enterprise systems for 24/7 operations
Special Order · Ships in 2-3 weeks

$90.99

Add to Cart
The item has been added
Compare

Out of stock
Honeywell

SKU: HF8TCB-ETHER-010

Honeywell HF8TCB-ETHER-010 Scanner I/O Cable

Ethernet PoE cable for Xenon XP 1952g area imager scanner
- Wired Ethernet with PoE Class 2 power for fixed-station deployments
- IP65 rated with 2.0 m drop protection for warehouse environments
- Connects 1D/2D area imager with 2.5–50.8 cm scan range
Special Order · Ships in 2-3 weeks

$96.99

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Honeywell HF800HD-R1-1H Fixed Mount Barcode Scanner

Honeywell HF800HD-R1-1V Fixed-Mount Barcode Scanner

Honeywell HF800SR-R1-1H Fixed Mount Barcode Scanner

Honeywell HF800SR-R1-1V Fixed Mount Barcode Scanner

Honeywell HF810-01BT00004K-R Fixed Mount Barcode Scanner

Honeywell HF810-01RT00004K-R Fixed Mount Barcode Scanner

Honeywell HF810-11BT00004K-R Fixed Mount Barcode Scanner

Honeywell HF810-11RT00004K-R Fixed Mount Barcode Scanner

Honeywell HF811-01BT00004K-R Fixed Mount Barcode Scanner

Honeywell HF811-01RT00004K-R Fixed Mount Barcode Scanner

Honeywell HF811-11BT00004K-R Fixed Mount Barcode Scanner

Honeywell HF811-11RT00004K-R Fixed Mount Linear Imager 1D Barcode Scanner

Honeywell HF8ACC-BRACKET-01 CT47 Mounting Bracket

Honeywell HF8TCB-ETHER-002 Scanner I/O Cable

Honeywell HF8TCB-ETHER-005 Xenon XP Scanner Cable

Honeywell HF8TCB-ETHER-010 Scanner I/O Cable

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading

Certified Experts

Manufacturer Authorized

Expert Access

Since 2014

Brands

Categories

IP Cameras

Ordering

Legal

Company

Sales & Expert Advice

Customer Service