Exit Buttons
Showing Results for Exit Buttons
-
Camden
SKU: CM-9000/10N
Camden CM-9000/10N Steel Flush Momentary Strike
- All-metal flush-mount construction resists vandalism in schools, hospitals, and secure perimeters.
- DPDT relay switches two circuits simultaneously—no extra relays needed for strike plus alarm shunt.
- Rated 6A @ 30VDC; compatible with EM strikes, electric deadbolts, and door operator control circuits.
$90.00 $54.99 Save $35.01The item has been added -
Camden
SKU: CM-9000/15N
Camden CM-9000/15N Steel Flush Maintained Strike
- Maintained 30VDC operation holds bolt continuously until power is removed.
- Flush-mounted 7/8" steel body reduces tamper exposure in high-traffic frames.
- Scales to 45 door positions per panel for campus or multi-tenant deployments.
$110.00 $67.99 Save $42.01The item has been added -
Add to Cart The item has been addedCamden
SKU: CM-9080
Camden CM-9080 DPDT Momentary Electronic Strike
- DPDT momentary relay delivers clean pulse-in/activation-out with no latching state drift.
- 30VDC / 6A rating supports standard strikes and maglocks on legacy and modern controllers.
- Color-coded 18 AWG spade leads connect directly to relay outputs—no adapters required.
In stock · Ships same business day$120.00 $75.99 Save $44.01The item has been added -
Add to Cart The item has been addedCamden
SKU: CM-9080PTE
Camden CM-9080PTE DPDT Momentary Strike
- DPDT contact logic controls both energize and de-energize from one device, cutting relay count.
- 30VDC / 6A inrush rating integrates directly with standard access control panels, no conditioner needed.
- Recessed brushed aluminum faceplate with countersunk button resists pry attacks and blunt-force impact.
In stock · Ships same business day$130.00 $79.99 Save $50.01The item has been added -
Camden
SKU: CM-9090
Camden CM-9090 DPDT Maintained Strike Lock
- Maintained DPDT operation holds the strike unlocked for the full access signal duration.
- Rated 6 A at 30VDC, matching standard access control power supplies with no voltage conversion.
- UL/CSA approved for North American life-safety, egress, and ingress control installations.
$140.00 $85.99 Save $54.01The item has been added -
Add to Cart The item has been addedCamden
SKU: CM-9180
Camden CM-9180 DPDT Momentary Lock/Strike
- Fail-secure design keeps the door locked on power loss or signal drop.
- DPDT momentary contact at 30VDC/6A eliminates continuous duty cycle overhead.
- 1/4-inch aluminum faceplate with countersunk construction resists tampering.
In stock · Ships same business day$120.00 $74.99 Save $45.01The item has been added -
Camden
SKU: CM-9180PTE
Camden CM-9180PTE DPDT Momentary Strike
- DPDT momentary relay auto de-energizes after pulse, reducing thermal stress on locks.
- Rated 6A at 30VDC, supporting standard electric strike and EM lock loads directly.
- 1/4" aluminum faceplate and countersunk steel pushbutton resist tampering in high-traffic sites.
$130.00 $79.99 Save $50.01The item has been added -
Camden
SKU: CM-9190
Camden CM-9190 DPDT Maintained Strike
- DPDT maintained contact holds state until commanded, reducing false-release events.
- 30VDC operation lowers shock risk and reduces load on access control power supplies.
- TCP/IP connectivity enables remote actuation and audit logging without relay panels.
$140.00 $85.99 Save $54.01The item has been added -
Add to Cart The item has been addedCamden
SKU: CM-9600
Camden CM-9600 Illuminated Piezoelectric Push Button
- Piezoelectric actuation eliminates moving parts, removing wear-out cycles in high-traffic installs.
- IP66-rated stainless steel faceplate suits exterior and vandal-prone sites without extra housings.
- Field-selectable N/O and N/C relay contacts support fail-safe and fail-secure configurations.
In stock · Ships same business day$208.00 $127.99 Save $80.01The item has been added -
Add to Cart The item has been addedCamden
SKU: CM-9610
Camden CM-9610 Illuminated Piezoelectric Push Button
- Solid-state piezoelectric mechanism eliminates mechanical wear for reliable 24/7 RTE duty.
- Field-selectable N/O or N/C dry contact (2A @ 30VDC) via jumper—no module swaps needed.
- Red/green/off LED and 24VDC supply integrate directly with strikes, mag-locks, and operators.
In stock · Ships same business day$208.00 $127.99 Save $80.01The item has been added -
Camden
SKU: CM-9800/3
Camden CM-9800/3 Exit Button Controller
Networked exit button controller with TCP/IP and 24VDC for centralized access management
- TCP/IP connectivity integrates with IP-enabled access control systems across distributed locations
- Supports up to 10 concurrent users on single 24VDC power supply for multi-user installations
- Wall-mounted IP66-rated design handles indoor and outdoor access control environments
$225.00 $137.99 Save $87.01The item has been added -
Camden
SKU: CM-9800/7
Camden CM-9800/7 Exit Button Controller
- IP66-rated housing survives direct spray and dust without a separate weatherproof enclosure.
- Form C relay output at 24VDC/2A integrates directly with mag-locks, strikes, and access panels.
- Adjustable 0–60 s hold-open timer coordinates multi-strike lock sequences without extra modules.
$225.00 $137.99 Save $87.01The item has been added -
Camden
SKU: CM-RFK354
Camden CM-RFK354 Exit Buttons
TCP/IP networked exit button with HID credential support for access control
- Network-based REX signaling integrates directly with TCP/IP access control panels
- HID credential compatibility ties into existing cardholder databases and systems
- Centralized monitoring with audit trail logging for remote exit request verification
$520.00 $318.99 Save $201.01The item has been added -
Camden
SKU: CM-RFK454
Camden CM-RFK454 Exit Buttons
- TCP/IP connectivity integrates directly into existing IP network infrastructure without dedicated controller wiring.
- HID credential support ensures compatibility with established card and badge reader ecosystems.
- Kinetic battery-less push plates eliminate battery maintenance across wall and column mount deployments.
$550.00 $336.99 Save $213.01The item has been added -
Camden
SKU: CM-RFK464
Camden CM-RFK464 Exit Buttons
- TCP/IP communication integrates directly into IP-native access control networks.
- HID credential support simplifies deployment in mixed-vendor reader environments.
- Kinetic, battery-less switch operation eliminates wiring to a power source at the door.
$550.00 $336.99 Save $213.01The item has been added -
Add to Cart The item has been addedCamden
SKU: CM-RFL354-A
Camden CM-RFL354-A Exit Button Credential Reader
HID credential exit button with TCP/IP networking and 30VDC power
- HID-compatible credential reading integrates with existing badge systems
- TCP/IP communication connects directly to networked access control platforms
- 30VDC operation requires dedicated power provisioning at exit point
In stock · Ships same business day$450.00 $275.99 Save $174.01The item has been added
Exit Buttons
Exit buttons, also known as request-to-exit (REX) devices, allow occupants to safely unlock doors from the secured side. Proper selection ensures reliable operation, life-safety compliance, and smooth integration with your access control system.
Plan Your Deployment
- Fail-safe vs fail-secure door configuration
- Door type and mounting location
- Integration with controller inputs and timing rules
- Local fire and life-safety code compliance
- Durability and vandal-resistant requirements
Exit Buttons — Engineering-Grade Door Hardware for Commercial Deployments
This category covers 105 working models of exit buttons sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Fail-safe versus fail-secure determines what happens during power loss. Fail-safe locks unlock on power loss (used on egress doors where life safety dominates); fail-secure locks remain locked (used on storage, server rooms, and exterior doors where security dominates). Code typically mandates fail-safe on stairwell and egress doors. Confirm with the AHJ before specifying — misapplied lock mode is a common code violation.
Strike, mortise, magnetic lock, and electrified panic hardware each have distinct installation, current draw, and code implications. Electric strikes work with most mechanical locksets and are easiest to retrofit. Magnetic locks (maglocks) provide high holding force on glass and wood doors but require dedicated REX and panic-bar interfaces for egress compliance. Verify the door's existing prep before choosing.
Power draw and inrush current dictate power supply sizing. A 5-door system with 1A peak per lock can exceed an undersized 12VDC supply at simultaneous lock-down events. Account for accessories — REX motion sensors, door-position switches, electrified levers — when sizing the supply and the battery backup required for code compliance.
Tamper switches, door-position monitoring, and request-to-exit sensors generate the audit trail your security team needs. Mechanical contact switches are cheaper; magnetic reed switches resist tampering better. Pair each door with a position switch and a REX sensor at minimum — without door-position monitoring, you can't distinguish 'authorized entry' from 'door held open after authorized entry,' which is a common compliance gap.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Power | AC/DC |
| Type | Lock/Strike, Reader, Switch, Accessory, Credential, Controller, Diecast Aluminum Enclosure, 3-Button Control Station |
Top Brands in This Category
Frequently Asked Questions
Fail-safe or fail-secure for stairwell doors?
Fail-safe is mandatory on most stairwell doors and other code-designated egress paths — the lock must release on fire alarm or power loss to allow evacuation. Fail-secure on those doors is a code violation. Confirm the local fire code and AHJ requirements; commercial buildings in the U.S. follow NFPA 101 and the International Building Code, both of which detail egress lock behavior in detail.
What current draw should I plan for electrified locks?
Typical 12VDC electric strikes draw 200-500 mA continuous, with inrush spikes of 1-2A at engagement. Magnetic locks rated for 1,200 lbs holding force draw around 500 mA continuous at 24VDC. Power supplies need to handle simultaneous lock-down current — emergency lockdown events activate all locks at once. Size the supply with at least 25% headroom and confirm battery backup runtime requirements.
Do I need a request-to-exit (REX) sensor?
Most code-compliant electrified door installations require a REX sensor to shunt the alarm during authorized egress. Without REX, every egress event registers as a forced-door alarm. PIR motion sensors are the common choice and integrate with the door controller's REX input. Mechanical push-bar REX is also acceptable for hardware that includes that switch natively.
Can I use one lock for both card and mechanical key entry?
Yes — most electrified strikes and locks allow mechanical key override on the same door. Maintaining a master key for emergency mechanical access is required by code in many jurisdictions and recommended in all. Document the master key holders carefully; an uncontrolled master key program undermines the electronic audit trail.
What's the lifespan of a magnetic lock?
Quality maglocks (Securitron M62, HES, von Duprin) typically last 15-20 years with no mechanical wear. Failure points are the connector, the armature plate-to-lock alignment, and contamination of the magnetic face. Plan for armature replacement at year 10 as a hedge against alignment drift. Strike-type locks with mechanical parts last 5-10 years before strike-plate wear becomes a reliability issue.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.