SDC

SKU: 55-ABCU

Sdc/Security Door Controls 55-ABCU Universal Electric Strike

Universal electric strike for multi-door access control via HID credentials

• Controls up to 4 independent doors on a single 24VDC supply, simplifying wiring runs.
• Six interchangeable UniFLEX faceplates fit retrofit frames without centerline modification.
• 2,500 lb static strength supports 3/4" latchbolts and 1" deadbolts in high-traffic zones.

SDC

SKU: 55-AU

SDC/Security Door Controls 55-AU Electric Strike 24VDC

24VDC electric strike with 630 lbs holding force for up to 4 doors

• 630 lb holding force handles heavy-traffic and high-security door applications.
• Single 24VDC unit controls up to 4 doors, reducing panel count and wiring runs.
• OSDP and TCP/IP dual protocol integrates with Lenel, Genetec, Salto, and Gallagher.

STI

SKU: KIT-06297D

STI KIT-06297D Electric Strike Spacer Kit for STI-1210D/1221D

• Corrects frame-depth misalignment for STI-1210D and STI-1221D electric strikes.
• Operates at 9V DC, integrating directly with the strike's existing power circuit.
• Frame-specific design prevents latch engagement gaps on wood, metal, or composite frames.

STI

SKU: KIT-09

STI KIT-09 Replacement Glass for Electric Strike

• Direct replacement glass restores STI 6100 electric strike function without full unit swap.
• Rated 9V DC for drop-in compatibility with standard low-voltage access control power supplies.
• Targeted spare part minimizes downtime during maintenance on existing strike installations.

STI

SKU: KIT-405440

STI KIT-405440 Gasket for STI-6514 Electric Strike

Replacement gasket assembly for STI-6514 electric strike units

• Designed for STI-6514 9VDC electric strike with HID credential reader
• Restores door frame seal integrity and strike operational performance
• Wall-mounted gasket/seal component for access control installations

STI

SKU: KIT-901

STI KIT-901 Clear 2" Spacer for STI-9105 Electric Strike

2" clear spacer for STI-9105 electric strike door frame alignment

• 2-inch acrylic/polycarbonate thickness corrects frame mounting variations
• Installs between strike and frame for proper 9VDC electromagnetic engagement
• Compatible with STI-9105 electric strike systems in access control setups

STI

SKU: KIT-G101598

STI KIT-G101598 Gasket for Electric Strike

• Direct replacement gasket restores seal integrity on STI-6518 electric strike assemblies.
• Rated for 9VDC systems, ensuring electrical compatibility with existing power supplies.
• Supports HID credential reader installations, maintaining access control continuity.

STI

SKU: KIT-G82599

STI KIT-G82599 Gasket for STI-6516 Electric Strike

• Restores weatherproofing on the STI-6516 electric strike, blocking moisture and dust intrusion.
• Designed specifically for the STI-6516 9VDC strike — geometry ensures proper seating and full seal.
• No special tools required; installs between strike body and cover plate using standard fasteners.

STI

SKU: KIT-M02002

STI KIT-M02002 Clear Frame for Stopper II Electric Strike

• Clear polycarbonate construction allows strike status inspection without removing cover.
• Mounts directly over Stopper II assembly using four fixing points drilled into masonry.
• Draws no independent power; operates at 9V DC through existing access control circuit.

STI

SKU: STI-12006

STI STI-12006 Mugger Stopper Plus Electric Strike

• Operates at 9VDC for direct integration with low-voltage access control panels.
• Electric strike enables remote or credential-based door release without high-current draw.
• Suits retrofit and new installations using standard low-voltage wiring and strike circuits.

STI

SKU: STI-1250

STI STI-1250 Flush Mount Electric Strike with Fire Label

Fire-labeled flush mount strike, 9VDC, silent operation for access control

• Fits standard door frame cavities with no surface housing required
• 9VDC low-voltage operation simplifies control system integration
• Fire-labeled certification meets life-safety compliance on rated doors

STI

SKU: STI-1250NR

STI STI-1250NR Weather Stopper Flush Mount Electric Strike

• Runs on included 9V DC battery—no hardwired power needed for remote deployments.
• Closed-cell gaskets seal against rain and temps from -40°F to 250°F for outdoor use.
• UL-listed flush-mount fits standard frames; works with cards, keypads, and proximity readers.

STI

SKU: STI-1331

STI STI-1331 Universal Stopper® Electric Strike

Universal Stopper® electric strike for retrofit and new access control installations

• 9VDC operation integrates with standard access control relay systems and battery backup
• Universal Stopper® design fits multiple door frame types without custom modifications
• Wall-mount configuration supports both retrofit and new installation deployments

Ubiquiti

SKU: UACC-LOCK-STRIKE-SAFE-15MM

Ubiquiti UACC-LOCK-STRIKE-SAFE-15MM Fail-safe electric strike

Fail-safe electric strike with 1,200 kg holding force for UniFi access control

• Delivers 1,200 kg (2,645 lb) holding force for high-security single-door deployments.
• Fail-safe design releases on power loss; integrates via 12V DC/400mA with UniFi access control.
• DPS+/DPS- dry contact terminals enable configurable open/closed door status monitoring.

Ubiquiti

SKU: UACC-LOCK-STRIKE-SAFE-8MM

Ubiquiti UACC-LOCK-STRIKE-SAFE-8MM Fail-safe electric strike

Fail-safe electric strike with 500 lb holding force for UniFi Access

• Delivers 500 lb (227 kg) holding force on wooden or metal door frames.
• Runs on 12V DC at 200mA; integrates with UniFi Access or any dry-contact system.
• NDAA compliant with FCC, IC, and CE certifications; rated -10 to 60°C.

Ubiquiti

SKU: UACC-LOCK-STRIKE-SECURE-15MM

Ubiquiti UACC-LOCK-STRIKE-SECURE-15MM Fail-Secure Electric Strike Lock

Fail-secure strike lock, 1,200 kg holding force, UniFi Access ready

• 1,200 kg holding force resists forced entry on server rooms and secure perimeters.
• Fail-secure design keeps door locked during power loss, preventing unauthorized access.
• 12V DC at 400mA integrates directly into UniFi Access hubs without extra power supply.