Refine by

No filters applied

Sub categories

Cellular Communicators

12 items

Intrusion Panels

33 items

Keypads & Touchscreens

34 items

Motion & Glass Break Detectors

67 items

Sirens & Sounders

12 items

Wireless Sensors

52 items

Access Cards & Credentials

22 items

Access Hubs & Controllers

21 items

Card Readers

54 items

Control Systems

258 items

Credentials

656 items

Door Controllers

139 items

Door Hardware & I/O

1530 items

Door Locks & Strikes

325 items

Showing Results for Access Control

Compare

Out of stock
HES

SKU: AM3325

HES AM3325 Maglock Brackets Duro

Heavy-duty maglock brackets for HES systems, wood and metal frames
- Commercial-grade aluminum construction rated for 7-door capacity
- Fail-safe and fail-secure compatible without bracket modification
- Industry-standard fasteners work across wood and metal frame types
$82.00 $81.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$82.00 $81.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: AM3326

HES AM3326 Maglock Bracket Assembly

Aluminum bracket assembly for HES maglocks on standard commercial doors
- Engineered fit for HES electromagnetic locks eliminates installation guesswork
- Aluminum construction rated for high-traffic access points with daily cycling
- Includes professional fasteners; retrofit-ready for new builds and upgrades
$111.00 $110.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$111.00 $110.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: AM3330

HES AM3330 Additional Header Wall Plate 600 Series

Header wall plate for HES 600 Series single magnetic locks
- Header wall plate for the HES 600 series maglock
- Direct-fit accessory for single magnetic lock install
- Wall-mounted header configuration for commercial doors
$40.00 $39.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$40.00 $39.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: AM3331

HES AM3331 Maglock Mounting Brackets — Duro Heavy-Duty

Heavy-duty Duro brackets for HES maglocks in commercial/industrial
- Dual-point magnet and strike assembly mounting for proper alignment
- Duro construction resists corrosion in demanding indoor/outdoor settings
- Complete fasteners, anchors, and templates included for quick installation
$78.00 $77.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$78.00 $77.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: AM3332

HES AM3332 Maglock Brackets Duro

Heavy-duty maglock brackets for door frame and header mounting
- Rigid bracket assembly handles sustained electromagnetic lock pull force
- Compatible with HES and third-party maglock hardware for flexible sourcing
- Mounts to metal and reinforced door frames using standard fastening methods
$113.00 $112.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$113.00 $112.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: AM3335

HES AM3335 Maglock Mounting Brackets

HES maglock mounting brackets for standard door frame installations
- Purpose-built for HES electromagnetic lock systems with included fastening hardware
- Durable bracket construction supports commercial and institutional access control deployments
- Integrates with standard door frame preparation for reliable maglock alignment
$82.00 $81.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$82.00 $81.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: AM3335A

HES AM3335A Armature Plate 600LB Magnetic Hold

600LB magnetic armature plate for HES electromagnetic lock systems
- 600LB holding force with built-in magnet for commercial access control
- Direct compatibility with HES electromagnetic lock units and door frames
- Lightweight 2 lb design for standard indoor commercial installations
$85.00 $84.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$85.00 $84.99 Save $0.01

Add to quote Compare
Compare

Add to Cart The item has been added
HES

SKU: AM3370

HES AM3370 Maglock Mounting Brackets

Frame-mounted maglock brackets for 12VDC electromagnetic lock systems
- Frame-mounted design integrates with HES electromagnetic lock units
- 12VDC input supports standard access control panel connections
- US-manufactured brackets weigh 1.75 lb for reliable door mounting
$139.00 $138.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$139.00 $138.99 Save $0.01

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
HES

SKU: AM3370C

HES AM3370C 3-Piece Z Bracket with Cover

Surface-mount Z bracket with cover for HES 600-series locks
- Three-piece assembly with protective cover resists weathering and dust
- Supports horizontal and vertical orientation on standard door frames
- Corrosion-resistant construction rated for outdoor access points
$192.00 $191.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$192.00 $191.99 Save $0.01

Add to cart Add to quote Compare
Compare

Out of stock
HES

SKU: AM3370CDURO

HES AM3370CDURO Z Bracket with Cover 3-Piece Duronic

Adjustable Z-bracket with corrosion-resistant duronic for wall and conduit
- 3-piece assembly with protective cover for secure camera positioning
- Duronic construction resists corrosion in indoor and outdoor environments
- Compatible with 2-inch conduit and standard wall-mount configurations
$221.00 $220.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$221.00 $220.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: AM3370DURO

HES AM3370DURO 3-Piece Z Bracket 600 Duronic

3-piece Z bracket with 600 Duronic finish for indoor/outdoor mounting
- 600 Duronic corrosion-resistant coating for extended outdoor durability
- Modular 3-piece design adapts to varied security system mounting configurations
- Engineered for standard security and access control system installations
$167.00 $166.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$167.00 $166.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: AM3375

HES AM3375 Maglock Mounting Brackets

HES AM3375 maglock mounting brackets for electromagnetic lock systems
- Purpose-built brackets for HES maglock installations with standard mounting
- Supports new builds and retrofit projects in commercial access control
- 12VDC electromagnetic lock hardware rated for single and multi-door systems
$273.00 $272.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$273.00 $272.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: AM6305

HES AM6305 Maglock Bracket for Electromagnetic Lock Systems

Heavy-duty maglock bracket for HES electromagnetic locks on standard door frames
- Mounts directly to standard commercial door frames, eliminating custom fabrication work.
- Supports fail-safe and fail-secure configurations for flexible access control deployment.
- Engineered for HES electromagnetic lock hardware, ensuring proper alignment and load distribution.
$57.00 $56.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$57.00 $56.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: AM6310

HES AM6310 Maglock Bracket

Door frame mounting bracket for HES electromagnetic locks
- Fits single and double-door configurations on standard frames
- Maintains consistent maglock face-plate alignment for reliable hold
- US-manufactured bracket for commercial, institutional, industrial access
$104.00 $103.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$104.00 $103.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: AM6320

HES AM6320 Maglock Mounting Brackets

Door frame and wall-mounted maglock brackets for HES systems
- Dual mounting configuration handles both vertical door frame and wall installations
- Engineered load distribution keeps maglock engagement consistent over time
- Precise alignment support reduces binding and component wear in access control setups
$62.00 $61.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$62.00 $61.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: AM6320C

HES AM6320C L-Bracket with Cover for 1200-Series Locks

L-bracket with cover for HES 1200-series electromagnetic locks
- Integrated protective cover shields lock from rain, dust, and impact
- Wall and frame mounting flexibility eliminates custom fabrication needs
- Single part number consolidates bracket and cover, cuts install time
$97.00 $96.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$97.00 $96.99 Save $0.01

Add to quote Compare

Access Control

Access control systems secure doors, manage credentials, and enforce entry policies across commercial facilities. Build a scalable deployment with the right combination of controllers, readers, credentials, and door hardware.

Plan Your Deployment

Door count and expansion requirements
Reader type (card, keypad, biometric) and credential format
Fail-safe vs fail-secure hardware design
Power, cabling, and network connectivity planning
Multi-site governance and consistent standards

Buying Guide Get Recommendations Deployment Support

Build a Complete System

Most access control installations need these companion products to be fully functional. Add them to your cart for system-wide compatibility.

Door intercoms

Aiphone DA-1MD Audio Handset Master Station

$82.99

Aiphone DB-1MD Hands-Free Master Station

$144.99

Aiphone DB-1SD Hands-Free Sub Master Station

$113.99

Aiphone JOS-1FW 7" Video Intercom Box Set with Mobile A

$820.99

What to Look For When Buying

The six decisions that matter most before you spec.

Fail-Safe vs Fail-Secure

Fail-safe locks (power-to-lock) unlock on power loss — required for egress routes by most fire codes. Fail-secure (power-to-unlock) stays locked on power loss — used on office and storage doors where security trumps egress. Life-safety code interpretation varies by jurisdiction; consult your AHJ before specifying. See our fail-safe vs fail-secure guide.

OSDP vs Wiegand

Wiegand is the legacy reader-to-controller protocol (unencrypted, one-way, limited to 26-bit formats). OSDP (Open Supervised Device Protocol) is the modern replacement — bidirectional, encrypted, supervised, and future-proof for Seos/mobile credentials. New deployments should be OSDP; plan a Wiegand-to-OSDP migration path in legacy systems before adding mobile credential support.

Credential Technology

125 kHz proximity (HID Prox, EM) is the legacy standard — cheap, cloneable, no security. 13.56 MHz smart cards (iCLASS SE, MIFARE DESFire EV3, Seos) use AES encryption and are the commercial standard. Mobile credentials via NFC/BLE increasingly replace physical cards — but only on OSDP-capable readers. Specify multi-technology readers for migration flexibility.

Cloud vs On-Prem Management

Traditional server-based access platforms (Lenel, Genetec, C-Cure) require IT infrastructure and maintenance contracts. Cloud-native platforms (Brivo, Openpath/Avigilon Alta, Genea) eliminate servers but add per-door monthly fees. Mid-size deployments increasingly choose cloud; enterprise + critical infrastructure still favor on-prem. Hardware choice determines which platforms you can run.

Power Supply Sizing

Every lock + reader + controller has an inrush current and a holding current — and they differ. Maglocks hold at 300-500 mA but pull 800 mA on release. UL 294 power supplies rated for total simultaneous holding + 25% headroom, with battery backup sized to code-required runtime. Undersized power supplies are the #1 cause of access-control nuisance failures.

Code Compliance (Egress)

IBC, NFPA 101, and ADA all mandate unimpeded egress. A magnetically-locked door requires a fire-alarm tie-in, a bond-sensor, and a request-to-exit device — omit any and the door is a code violation. Delayed-egress maglocks require 15-second delay + sounder per NFPA. Always confirm lock spec with the AHJ before ordering.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

OSDP v2 + Secure Channel

Open Supervised Device Protocol v2 with Secure Channel Protocol (SCP) delivers AES-128 encryption between reader and controller over RS-485. Replaces unencrypted Wiegand. Required for new federal deployments and FIPS 140-2 applications. All modern HID, ASSA ABLOY, and STid readers support OSDP + SCP.

Seos + iCLASS SE Credentials

HID Seos is the current-generation credential platform: AES-128 encrypted, multi-application, supports mobile wallets, backward-compatible with iCLASS SE. Seos credentials work on Seos readers + older iCLASS SE readers — iCLASS SE credentials do not work on legacy iCLASS (non-SE) readers. Plan migrations carefully.

FIPS 201 / PIV + PIV-I

Federal Identity Verification standard — the credential format used for federal employee and contractor badges. PIV-I (Interoperable) is the commercial variant for hospitals, utilities, and critical-infrastructure contractors. Specify PIV/PIV-I-capable readers (HID pivCLASS, multiCLASS SE) for any facility that hosts government visitors.

UL 294 Listing

Underwriters Laboratories listing for access control system units — power supplies, controllers, and locks. UL 294 6th edition covers security, durability, and overcurrent/overvoltage protection. Insurance and code requirements increasingly specify UL 294 listing. Altronix access-control power supplies are UL 294 listed across the catalog.

Wiegand Protocol

Legacy reader-to-controller protocol — one-way, unencrypted, variable bit-length format. Easily cloned with <$50 hardware. Still widespread because of low cost and universal compatibility. Acceptable for low-security interior doors; should be replaced with OSDP on any external or sensitive-area door.

Request-to-Exit (REX)

Motion- or push-button-activated device that signals the access controller to unlock the door from the secure side without generating an alarm. Required for maglock-equipped egress doors per code. PIR REX sensors must be properly aimed — nuisance alarms and held-door violations trace back to bad REX placement more than any other cause.

Typical Deployment Scenarios

Multi-Tenant Office Building

Lobby turnstiles with multi-tech readers, tenant suite doors with HID Signo + Seos, parking garage with long-range readers, elevator control for floor-by-floor access. Cloud platform (Brivo, Openpath) with mobile credentials replaces physical card issuance. Integration with SIP video intercoms for visitor management.

K-12 School Secure Vestibule

Front entry vestibule with fail-secure electric strike, interior Aiphone video intercom for visitor buzz-in, badge readers for staff, lockdown button integrated with mass notification. Back-of-house doors fail-safe per code. Full VMS integration for event overlay.

Hospital & Healthcare

Unit doors with HID multiCLASS SE + PIV-I compatibility, medication rooms with dual-authentication (card + biometric), ER ambulance bays with ruggedized readers, delayed-egress on behavioral health wards. Lenel or Genetec server-based platform with HIPAA-compliant audit logging. High-cycle-count electric strikes required.

Data Center & Critical Infrastructure

Biometric readers at server-room entries, mantrap doors with anti-tailgating sensors, cage-level access with OSDP + SCP, 7x24 audit logging. FIPS 201 / PIV-I credentials. Integration with IP cameras for tailgating review and infrastructure monitoring for physical-layer security.

Frequently Asked Questions

What's the difference between fail-safe and fail-secure locks?

Fail-safe locks (also called "power-to-lock") unlock on power loss — required for egress routes by most fire and life-safety codes. Fail-secure locks ("power-to-unlock") stay locked on power loss — typically used on office, storage, and supply doors where security trumps egress. Always confirm lock selection with the local AHJ; see our fail-safe vs fail-secure guide.

Is OSDP required for new access control installations?

Not legally required in most jurisdictions — but strongly recommended and effectively mandatory for federal deployments. OSDP with Secure Channel provides AES-128 encryption between reader and controller, bidirectional supervision, and future-proof support for mobile credentials. Legacy Wiegand is unencrypted and easily cloned. New deployments should be OSDP-capable from day one; legacy systems should plan a migration path.

Are HID card readers NDAA compliant?

Yes. HID Global is headquartered in Austin, TX, manufactures in multiple allied countries, and is fully NDAA Section 889 compliant. HID Signo, multiCLASS SE, iCLASS SE, and pivCLASS reader families are all eligible for federal, state government, and critical-infrastructure procurement. Credential cards are manufactured to the same compliance standard.

How do I size an access control power supply?

Add up holding current for all locks + reader standby current + controller standby current, then add 25% headroom for inrush and aging. Battery backup should provide code-required standby runtime (typically 4 hours for fire-alarm tie-ins; 15 min for access-only). Altronix UL 294 power supplies post clear spec sheets for total and per-output current — match to your actual load, don't guess.

Can mobile credentials replace physical access cards?

In most modern deployments, yes — but the reader has to support it. Readers need NFC and/or BLE (Bluetooth Low Energy) plus a partnership with the mobile credential platform (HID Mobile Access, Openpath, Kastle, etc.). Older proximity-only readers cannot read mobile credentials. Mobile adoption is usually mixed with physical cards during a multi-year transition — plan for both.

What's the difference between iCLASS SE and Seos credentials?

iCLASS SE was HID's previous-generation secure credential (AES-128, 2013-era). Seos is the current generation (2016+) — same AES-128 security, but multi-application, mobile-wallet capable, and future-proof. Seos credentials work on Seos-capable readers and on older iCLASS SE readers. iCLASS SE credentials do not work on legacy (pre-SE) iCLASS readers. See our HID Global catalog for current Seos SKUs.