Camden

SKU: CM-PT250SS-18

Camden CM-PT250SS-18 Stainless Steel Endcaps 18"

• 300-series stainless endcaps resist corrosion in salt-spray and high-humidity sites.
• 1/4" ID fits up to four 22 AWG or two 18 AWG conductors for standard strike circuits.
• 18" length suits frame-to-panel runs in 36"–48" rough openings without splicing.

Camden

SKU: CM-PT250SS-24

Camden CM-PT250SS-24 Stainless Steel Endcaps 24"

• 304-grade stainless endcaps resist corrosion in salt-air and high-humidity outdoor installs.
• 24" length spans standard door frames without splices, reducing signal-run failure points.
• 1/4" bore accepts 4x22 AWG or 2x18 AWG wire; terminates on-site with no special tools.

Camden

SKU: CM-PT250SS-36

Camden CM-PT250SS-36 Stainless Steel Endcaps 36 Inch

• 300-series stainless steel resists corrosion in high-humidity and coastal environments.
• 1/4" bore fits 4-conductor 22 AWG and 2-conductor 18 AWG access control cables cleanly.
• 36-inch length covers panel-to-door runs and extended raceway segments in one piece.

Camden

SKU: CM-PT375SS-12

Camden CM-PT375SS-12 Stainless Steel Endcaps 12 Inch

• 300-series stainless endcaps resist washdown, salt spray, and moisture-driven corrosion.
• 3/8" ID tube routes up to 16×22 AWG or 8×18 AWG conductors in a single pass.
• 12-inch length fits standard commercial door frames without on-site trimming.

Camden

SKU: CM-PT375SS-24

Camden CM-PT375SS-24 Stainless Steel Endcaps 24"

• Stainless steel housing resists corrosion in salt-air and wet environments for 10+ years.
• Carries 16× 22 AWG or 8× 18 AWG conductors through a 3/8" ID protective sleeve.
• 24" length bridges standard 18–30" door-to-frame spans; 36" variant available for wider gaps.

Camden

SKU: CM-PT375SS-36

Camden CM-PT375SS-36 Stainless Steel Endcaps 36 Inch

• 304 stainless steel resists corrosion in salt-air, high-humidity, and exterior sites.
• 36-inch length spans full door frames, minimizing mid-run splices and failure points.
• 3/8-inch ID supports 16-conductor 22 AWG or 8-conductor 18 AWG power transfer wire.

Camden

SKU: CM-RFK354

Camden CM-RFK354 Exit Buttons

TCP/IP networked exit button with HID credential support for access control

• Network-based REX signaling integrates directly with TCP/IP access control panels
• HID credential compatibility ties into existing cardholder databases and systems
• Centralized monitoring with audit trail logging for remote exit request verification

Camden

SKU: CM-RFK454

Camden CM-RFK454 Exit Buttons

• TCP/IP connectivity integrates directly into existing IP network infrastructure without dedicated controller wiring.
• HID credential support ensures compatibility with established card and badge reader ecosystems.
• Kinetic battery-less push plates eliminate battery maintenance across wall and column mount deployments.

Camden

SKU: CM-RFK464

Camden CM-RFK464 Exit Buttons

• TCP/IP communication integrates directly into IP-native access control networks.
• HID credential support simplifies deployment in mixed-vendor reader environments.
• Kinetic, battery-less switch operation eliminates wiring to a power source at the door.

Camden

SKU: CM-RFL354-A

Camden CM-RFL354-A Exit Button Credential Reader

HID credential exit button with TCP/IP networking and 30VDC power

• HID-compatible credential reading integrates with existing badge systems
• TCP/IP communication connects directly to networked access control platforms
• 30VDC operation requires dedicated power provisioning at exit point

Camden

SKU: CM-RFL452-SA

Camden CM-RFL452-SA Exit Buttons

• Operates at 30VDC, aligning with standard access control power infrastructure.
• Wall or recessed mount options support flexible door-side deployment in any installation.
• Includes CM-TX-9 wall switch transmitter for wireless door control system integration.

Camden

SKU: CM-RFL454-LPA

Camden CM-RFL454-LPA Exit Buttons

TCP/IP exit button with HID credential reader for networked access control

• IP-addressable device integrates directly into networked security systems
• Supports HID iCLASS and proximity credentials on 30VDC power supply
• Request-to-exit button functionality for facility entry and exit points

Camden

SKU: CM-RFL454-SA

Camden CM-RFL454-SA Exit Buttons

• Operates at 30VDC for direct compatibility with commercial strikes and mag-lock supplies.
• Wall or recessed mount options simplify retrofit and new-construction door deployments.
• Includes CM-TX-9 wall switch transmitter, enabling wireless door control integration.

Camden

SKU: CM-RFL464-LPA

Camden CM-RFL464-LPA Exit Buttons

Hardwired exit button with integrated HID reader and TCP/IP networking

• Reads HID cards and badges directly at exit point without separate reader
• TCP/IP network communication for real-time status in access control systems
• 30VDC operation compatible with standard door strikes and locking hardware

Camden

SKU: CM-RFL46CB4-LPA

Camden CM-RFL46CB4-LPA Exit Buttons

• HID credential support simplifies drop-in integration with existing multi-reader deployments.
• TCP/IP communication enables centralized monitoring and remote configuration over the network.
• 30VDC operation and wall/recessed mount options streamline installation into standard AC infrastructure.

Camden

SKU: CM-RQE70A

Camden CM-RQE70A PIR Request to Exit Detector

• UL 294 and ULC-S319 Class I listed, satisfying AHJ code-compliance audit requirements.
• Dual Form C relay contacts connect directly to EM locks and strikes—no intermediate relay needed.
• Four field-customizable modes tune detection range via on-board buttons without system downtime.