Optex

SKU: VXS-RDAMI

Optex VXS-RDAMI Outdoor Radar Motion Detector

Microwave radar motion detector for outdoor perimeters and variable temps

• 10.525 GHz microwave radar plus dual-tech PIR for outdoor zones
• Penetrates dust, fog, and light precipitation where PIR alone fails
• Drops onto standard alarm panel zone wiring for outdoor perimeter

PioneerPOS

SKU: 46-000F01

PioneerPOS Fingerprint Reader (for Stealth M5/M7 S - 46-000F01

• USB plug-and-play integration requires no extra power or driver installation on Stealth terminals.
• Fingerprint authentication eliminates shared passwords and prevents buddy-punching on Stealth M5/M7/S.
• Gray compact form factor mounts on counter without visual disruption to existing Stealth POS hardware.

PioneerPOS

SKU: 46B-000F11

PioneerPOS Fingerprint Reader No Flap USB Black for - 46B-000F11

• USB connectivity enables plug-and-play integration with existing POS workstations.
• Flap-free design reduces mechanical failure points in high-frequency access environments.
• Compatible with 15-inch and 17-inch Stealth terminals for targeted deployment flexibility.

PioneerPOS

SKU: T3P-FPR100

PioneerPOS Fingerprint reader URU - T3P-FPR100

• URU sensor delivers consistent fingerprint capture across varied skin types and conditions.
• USB bus-powered connection requires no external power supply or network configuration.
• ANSI/NIST template support enables integration with legacy POS and workforce platforms.

PioneerPOS

SKU: 49B-MX-U3201

PioneerPOS Mag. card reader 3tks USB Black MX22 - 49B-MX-U3201

• Reads all three ISO/ABA mag stripe tracks, covering badges, loyalty, and ID cards.
• USB bus-powered at 5V — no external supply needed, simplifying counter and kiosk installs.
• Keyboard-wedge and raw HID output modes enable driver-free integration with POS and access systems.

PioneerPOS

SKU: 4MB-BIO100

PioneerPOS ST3 Fingerprint Reader Black - 4MB-BIO100

• Fingerprint biometric auth eliminates shared PINs and lost-card credential resets.
• Single-port connection delivers both power (12VDC) and data — no external supply needed.
• Native ST3 integration requires no USB adapters, middleware, or network configuration.

PioneerPOS

SKU: Q12-T3P-BIO100

PioneerPOS T3P Fingerprint Reader URU USB-A - Q12-T3P-BIO100

• URU platform enables native SDK integration with existing identity and access control systems.
• Bus-powered USB-A connection eliminates separate power supplies, simplifying clinical deployments.
• Real-time scan-to-match cycles support high-throughput verification at registration and med points.

Posiflex

SKU: SD4040037

Posiflex SD4040037 Ks Fingerprint Reader Attachmtattach W/O

• Optical fingerprint sensor enables secure user authentication directly at the POS terminal.
• Snap-on bezel attachment installs without tools, minimizing KS-series deployment time.
• USB interface ensures plug-and-play connectivity with no additional driver infrastructure.

Posiflex

SKU: WF770JK

Posiflex WF770JK Module Wi-Fi Pcie WF770JK

• PCIe internal install eliminates USB dongles, keeping kiosk exterior clean.
• Adds Wi-Fi to JK series kiosks where Ethernet runs are impractical.
• Purpose-built for Posiflex JK line ensures driver compatibility and proper fit.

Potter

SKU: 70V-1000

Potter 70V-1000 Extender

70V audio extender for extended speaker runs without signal loss

• Extends 70V speaker runs without signal degradation or impedance mismatch.
• Rack-mount form factor simplifies installation in standard equipment enclosures.
• Supports paging, emergency notification, and multi-zone background audio deployments.

Potter

SKU: PFC-4064

Potter Conventional Fire Alarm Control Panel

Conventional fire alarm panel with 120 VAC power and 24 VDC backup

• Zone-based conventional architecture supports ionization, photoelectric, and heat detectors.
• 120 VAC primary supply with 24 VDC battery backup charger maintains operation during power loss.
• Built-in circuit supervision detects open or short-circuit faults for fast wiring fault isolation.

HID

SKU: 1326NSSNV

Proxcard II Non-prog F-hid Logo B-hid - 1326NSSNV

• Passive 125 kHz design works with HID ProxPro, ProxPro2, and ProxPoint Plus readers.
• Supports Wiegand formats up to 85 bits, yielding over 137 billion unique codes per deployment.
• Ships blank and non-programmed; enroll at issuance for straightforward credential lifecycle control.

HID

SKU: 1326NMSNV

Proxcard II Non-prog F-matte B-hid LO - 1326NMSNV

• Passive design eliminates battery replacement cycles and maintenance overhead.
• Supports up to 85-bit encoding with 137B+ unique IDs, preventing code collisions at scale.
• Compatible with any HID proximity reader — no configuration required for drop-in deployment.

HID

SKU: 1326LGSNV

Proxcard II Prog F-gloss B-hid Logo - 1326LGSNV

• Up to 85-bit encoding yields 137B+ unique codes, supporting large multi-site deployments.
• RF-programmable credential rewrites in the field without swapping cards or reader hardware.
• Passive PVC card requires no battery and integrates with existing HID proximity reader lines.

HID

SKU: 1326LSSMV

Proxcard II Prog F-hid Logo B-hid LOG - 1326LSSMV

• RF proximity encoding supports over 137 billion unique IDs, eliminating collision risk at scale.
• Compatible with all HID proximity readers—no hardware changes or protocol conversion required.
• Sequential card numbering simplifies badge replacement and access control audit trails.

HID

SKU: 1326LSSSV

Proxcard II Prog F-hid Logo B-hid LOG - 1326LSSSV

• Passive 125 kHz RF design eliminates battery replacement and tracking overhead.
• Supports up to 85-bit formats with over 137 billion unique codes for large deployments.
• Compatible with HID legacy proximity readers including ProxPro, ProxProx, and VertX-series.