Honeywell

SKU: LTEM-XV

Honeywell Verizon LTE-M Communicator for VISTA - LTEM-XV

• Dual-mode Verizon LTE Cat-M1/Cat-1 keeps alarm signals reaching the central station if primary paths fail.
• Integrates directly into VISTA panels with no external antenna or separate power supply required.
• 256-bit AES encryption secures all transmitted Contact ID and ECP alarm data over AlarmNet/AlarmNet-i.

Honeywell

SKU: LTEM-PV

Honeywell Verizon LTE-M Fire Communicator for VISTA - LTEM-PV

• Connects VISTA panels to AlarmNet via Verizon LTE CAT-M1 for primary or backup transmission.
• CAT-M1 radio maintains reliable signal in underground and dense indoor environments.
• Accepts optional PROWIFIZW or PRODCM add-on modules for expanded connectivity and capture.

Honeywell

SKU: 4232CBM

Honeywell VISTA Automation Module - 4232CBM

• Dual serial interfaces—RS232 to 50 ft and RS422 to 1,000 ft—cover most integration runs.
• ECP bus-powered at 8–12V (50mA nominal) eliminates the need for a separate power supply.
• Tape-mounts inside the panel cabinet with no drilling, preserving cabinet integrity.

Honeywell

SKU: VISTA-15P

Honeywell VISTA-15P Wired Intrusion Control Panel

Hardwired intrusion panel with multi-zone support and 16.5VAC transformer

• Hardwired architecture eliminates RF interference and wireless dropouts in metal-frame buildings.
• Integrated 16.5VAC 40VA transformer powers the panel plus sirens, strobes, and relay modules.
• Supports smoke and fire detection analytics alongside intrusion zones in a single control panel.

Honeywell

SKU: V20PACK

Honeywell VISTA-20P Burglary Alarm Control Panel Kit - V20PACK

• Scales VISTA-20P to 48 total zones via DZT without replacing the base panel.
• Adds up to 4 wireless key fobs with zero zone consumption—ideal for retrofit sites.
• IP upload/download support eliminates phone-line dependency for remote programming.

Honeywell

SKU: VISTA-20P

Honeywell VISTA-20P Wired Intrusion Control Panel

Hardwired intrusion panel for retail, warehouse, and residential perimeter protection

• All-wired topology eliminates RF dropout in electrically noisy warehouses and floors.
• 16.5VAC 40VA transformer powers sensors, keypads, and auxiliary devices in one panel.
• Zone-based alarm logic integrates into established Honeywell platforms, reducing installer overhead.

Honeywell

SKU: VISTA-20PSIA

Honeywell VISTA-20PSIA Wired Intrusion Control Panel

Hardwired intrusion panel with integrated 40VA transformer for residential and light commercial

• Hardwired topology eliminates RF interference and dead zones in metal-structure sites.
• Integrated 16.5VAC 40VA transformer powers door strikes, relays, and perimeter devices.
• Smoke detection integration consolidates intrusion and life-safety zones on one panel.

Honeywell

SKU: VISTA-20PUL

Honeywell VISTA-20PUL Control Panel with Communicator

• 8 hardwired zones on-board, expandable to 48 hardwired or 64 with wireless receiver.
• Built-in IP communicator eliminates a separate module, reducing install complexity.
• Supports LTE-XA/XV/IA/IV and TUXEDO keypads for flexible upgrade paths.

Honeywell

SKU: VISTA-21IP

Honeywell VISTA-21IP Wired Intrusion Control Panel

Hardwired intrusion panel eliminates RF interference for predictable alarm response

• Hardwired design eliminates RF dead zones and delivers deterministic alarm signal latency.
• 16.5VAC 40VA onboard power runs panel, sensors, sirens, and keypads without added distribution.
• Intrusion-specific architecture suits commercial sites with existing low-voltage structured cabling.

Honeywell

SKU: VISTA-250BPT

Honeywell VISTA-250BPT 250-Zone Commercial Intrusion Panel

250-zone wired intrusion panel for large commercial multi-tenant buildings

• Supports up to 250 wired zones for high-density commercial and multi-tenant deployments.
• Wired-only architecture eliminates RF interference in concrete-heavy urban structures.
• Onboard 16.5VAC 40VA supply powers zone loops, keypads, and auxiliary devices.

Honeywell

SKU: VISTA-50P

Honeywell VISTA-50P Wired Intrusion Control Panel

Hardwired intrusion panel for multi-tenant buildings without RF interference

• Wired zone architecture eliminates RF interference in electromagnetically congested facilities.
• Onboard 16.5VAC 40VA transformer powers sensors and keypads without external conditioning modules.
• Engineered for mid-size commercial and multi-tenant deployments requiring independent zone monitoring.

Honeywell

SKU: WAVE2

Honeywell WAVE2 Two-Tone Indoor Alarm Siren

106 dB two-tone indoor siren for hardwired alarm systems

• 106 dB two-tone output cuts through ambient noise on warehouses and multi-floor sites.
• Hinged snap-open case enables terminal wiring access without unmounting the unit.
• 6–12 VDC input at 500 mA max integrates directly with standard 12 VDC panel aux outputs.

Honeywell

SKU: 5815WG

Honeywell Wide-Gap Door/Window Contact - 5815WG

• Wide-gap wireless contact for door and window magnet spacing >1 inch
• Honeywell 5800 series wireless transmission to compatible receivers
• CR2430 lithium battery for multi-year unattended operation

Honeywell

SKU: 5800PIR

Honeywell Wireless PIR Motion Detector - 5800PIR

• 345 MHz wireless transmission eliminates sensor loop wiring on compatible 5800-series panels.
• 35 ft × 40 ft coverage with pet immunity up to 80 lbs reduces false alarm callbacks.
• 3V lithium battery rated up to 5 years cuts maintenance visits in multi-sensor deployments.

i-PRO

SKU: MC-7610

i-PRO Credintial: 7610 Proximity Keyfob (minimum Order - MC-7610

• 125 kHz passive RFID needs no batteries, eliminating credential maintenance overhead.
• Compatible with Schlage AD-400/NDE and HID readers for broad ecosystem deployment.
• NDAA-compliant keyfob suits bulk credentialing of contractors and shift workers.

i-PRO

SKU: MC-T2MK7F8QMC

i-PRO MC-T2MK7F8QMC 8-Door Access Control Power Kit

Complete 8-door access control kit with integrated power and offline operation

• Includes control panel, power board, reader interfaces, and pre-tested cabling
• Local credential storage maintains door access during network outages
• Wall-mounted 18"H × 14.5"W housing with regulated power for locks and readers