Camden

SKU: CX-WC18SL

Camden 4-1/2\" Wide Side Load Column™ Switch with - CX-WC18SL

• TCP/IP communication enables direct integration into existing IP-based access control networks.
• Native electric strike output supports fail-secure and fail-safe solenoid door locking configurations.
• 4-1/2" column mount fits standard door frame cavities with minimal surface protrusion.

Camden

SKU: CM-42-DSU-SS

Camden 42” Tall stainless steel bollard prep for - CM-42-DSU-SS

• Stainless steel outdoor-rated construction resists corrosion in salt spray and moisture.
• Supports HID and NFC/13.56MHz credentials for PIN, card, and smartphone authentication.
• Controls up to 5 independent access points; pre-engineered for CM-7536/7436 controllers.

Camden

SKU: CX-MA1214-58

Camden 5/8\" Filler Plate for 1 200 lb. Magnetic - CX-MA1214-58

• Bridges 5/8" frame gaps to ensure full armature contact on 1200 lb mag locks.
• Designed for Camden CX-91 series 24VDC magnetic locks; no electrical changes required.
• Prevents reduced holding force caused by strike misalignment during frame installation.

Camden

SKU: CX-MA0614-58-BK

Camden 5/8\" Filler Plate for 600 lb. Magnetic - CX-MA0614-58-BK

• 5/8 inch filler plate shims uneven frames for 600 lb mag lock fit
• Eliminates door alignment problems from out-of-plumb frames
• Black anodized finish matches Camden 600 lb mag lock hardware

Camden

SKU: CM-660

Camden 6-1/2\" Dress plate, Cover for double gang or 4\" square flu...

6-1/2" dress plate for double gang and 4" square flush boxes

• Covers and finishes access control installations in standard electrical boxes
• Fits double gang outlet boxes and 4" square flush-mounted configurations
• Compatible with TCP/IP networked systems operating at 30VDC

Camden

SKU: 60-57A027

Camden 60-57A027 Red 12" x 12" Delayed Egress Sign

12" x 12" red delayed egress sign for proximity access control

• Red 12" x 12" format meets standard emergency exit signage footprints
• Works with proximity reader-based access control systems at doors
• Suitable for interior and exterior emergency exit installations

Camden

SKU: CX-91M-06

Camden 600 lbs. Mortise mount single door - basic - CX-91M-06

• Mortise mount recesses lock body into frame, eliminating exposed hardware attack points.
• Field-selectable 12/24 VDC eliminates voltage converters in mixed-power installations.
• 250 mA draw at 24 VDC lets multiple locks share one access power supply without derating.

Camden

SKU: CX-91M-06TLS

Camden 600 lbs. Mortise single mount door - with - CX-91M-06TLS

• 600 lb holding force handles full-glass and heavy commercial single-leaf doors.
• TCP/IP control integrates directly into networked access platforms—no relay panel needed.
• 24VDC operation reduces voltage sag on long wire runs versus 12VDC alternatives.

Camden

SKU: CX-92S-06-BK

Camden 600 lbs. Surface mount double door - CX-92S-06-BK

• 600 lbs holding force per door resists forcible entry on both leaves simultaneously.
• Surface mount design eliminates frame modification, enabling clean retrofit installations.
• Field-selectable 12/24VDC operation at 240mA integrates with most commercial access panels.

Camden

SKU: CX-92S-06

Camden 600 lbs. Surface mount double door magnetic - CX-92S-06

• 600 lb holding force handles heavy double-door institutional and commercial entries.
• Field-selectable 12/24VDC reduces inventory needs across mixed-voltage panel deployments.
• Fail-safe design defaults unlocked on power loss, meeting IBC and NFPA egress requirements.

Camden

SKU: CX-92S-06TDS-BK

Camden 600 lbs. Surface mount double doors - - CX-92S-06TDS-BK

• 600 lb dual-armature hold secures both door leaves with no frame reinforcement needed.
• Integrated TDS module combines timer, bond sensor, and status relay—no external control box.
• Field-selectable 12/24 VDC input adapts to existing power infrastructure; 240 mA at 24 VDC.

Camden

SKU: CX-92S-06TDS

Camden 600 lbs. Surface mount double doors - with - CX-92S-06TDS

• 600 lb electromagnetic hold handles double-door, high-traffic commercial entryways.
• Surface-mount design requires zero frame modification, cutting retrofit labor significantly.
• TCP/IP integration enables remote unlock commands and real-time audit logging at 24VDC.

Camden

SKU: CX-91S-06

Camden 600 lbs. Surface mount single door - basic - CX-91S-06

• 600 lb holding force magnetic lock for single commercial doors
• Surface mount - no door frame routing or jamb modification needed
• Field-selectable 12 or 24 VDC operation matches existing access power

Camden

SKU: CX-91S-06-BK

Camden 600 lbs. Surface mount single door - basic - CX-91S-06-BK

• 600 lb electromagnetic hold secures single commercial doors up to 48 in. wide.
• 24 VDC / 240 mA draw integrates directly with card readers and door controllers.
• Surface-mount bracket requires no frame mortising, cutting retrofit labor and cost.

Camden

SKU: CX-91S-06TDS

Camden 600 lbs. Surface mount single door - with - CX-91S-06TDS

• 600 lb holding force with no moving parts eliminates mechanical wear on single doors.
• Field-selectable 12/24VDC dual-voltage fits existing power supplies without hardware swaps.
• Integrated timer, door status sensor, and relay output reduce panel wiring complexity.

Camden

SKU: CX-91S-06TDS-BK

Camden 600 lbs. Surface mount single door - with adjustable timer, ...

600 lb magnetic strike with TCP/IP control and adjustable timer

• Surface mount installation on single doors with 600 lb holding force
• TCP/IP network connectivity for remote access control integration
• 24VDC operation with adjustable timer for customized lock-release timing