StarTech IESC1G80UP 8 Port Gigabit PoE Switch

Overview

The StarTech IESC1G80UP is an 8-port Gigabit PoE+ switch built for camera runs and edge network closets where the environment, not the desk, is the deployment target. With a 200W power budget spread across 8 ports at up to 30W each, this is sized for PTZ cameras, access-control panels, and other higher-draw PoE devices that a typical 15.4W unmanaged switch can't feed reliably. The -40C to 75C operating range and IP-30 housing standard point this squarely at unconditioned spaces — parking structures, rooftop equipment rooms, outdoor cabinets — rather than a climate-controlled server rack. If you're building out a camera segment where every port needs full PoE+ headroom and the switch itself has to survive temperature swings, the IESC1G80UP is worth a close look.

Key Features

• 200W PoE Power Budget: spread across 8 ports at up to 30W per port (IEEE 802.3at), this covers PTZ domes, heated housings, and access-control readers that exceed standard 802.3af's 15.4W ceiling — no need to budget around underpowered ports.
• IEEE 802.3af / 802.3at Dual Standard: the switch auto-negotiates power delivery per connected device, so older 802.3af cameras and newer 802.3at devices coexist on the same switch without manual configuration.
• 10/100/1000 Mbps Gigabit Ports: full Gigabit throughput on all 8 ports means multi-megapixel camera streams and video analytics traffic don't bottleneck at the switch — important once you're running more than a couple of 4K streams simultaneously.
• 16Gbps Switching Fabric: enough backplane capacity to run all 8 Gigabit ports at line rate simultaneously without oversubscription, so bandwidth doesn't degrade as you fill out the switch.
• 128KB Buffer Size: reduces packet loss during bursty traffic — relevant when several cameras start motion-triggered high-bitrate streams at the same time.
• 9K Jumbo Frame Support: handles larger frame sizes for efficient bulk data transfer, useful when backhauling recorded video segments across the network.
• IEEE 802.3x Flow Control: prevents buffer overrun on congested links by pausing transmission rather than dropping packets, which matters for lossless video delivery.
• -40C to 75C Operating Temperature: rated for unheated enclosures and outdoor cabinets in climates that would shut down a commercial-spec switch — this is the spec that separates an industrial switch from a rack-mount unit repurposed for the field.
• IP-30 Housing Standard: a solid metal enclosure rated for dust ingress protection in an open industrial panel, though it is not a sealed rating — pair with a proper enclosure if the install point sees direct weather.
• 693,764 Hour MTBF: a mean-time-between-failure figure that reflects componentry chosen for unattended, hard-to-access installs where a truck roll for a failed switch is expensive.
• IEC/EN Surge, ESD, EFT, Vibration, Shock, and Free-Fall Standards: (IEC 61000-4-2/4/5, EN 60068-2-6/27/32) this switch is tested against electrical transients and physical shock, the two most common failure modes for network gear mounted near motors, vehicles, or outdoor power runs.
• RJ-45 and Terminal Block Connectors: terminal block input accepts 48-56VDC for integration with DC power systems already common in industrial and vehicle installations, alongside standard RJ-45 for all 8 data/PoE ports.

Integration & Compatibility

The IESC1G80UP fits into camera deployments already built around IP cameras and works alongside network video recorders pulling multiple Gigabit streams. Because it's a standards-based 802.3af/at PoE switch, it integrates with PoE devices across brands rather than a single camera line — check your camera's PoE class against the 30W-per-port ceiling before committing to a dense install. For guidance on how many PoE ports and how much budget a given camera count needs, see this site's PoE planning guide. If you're outfitting a full closet or cabinet, browse the broader network switches category to compare port counts and power budgets against this model. The 48-56VDC terminal block input also makes the IESC1G80UP a fit for vehicle and DIN-rail power setups when paired with the correct power supplies.

What's in the Box

Package contents were not confirmed in available manufacturer evidence for this SKU.

Frequently Asked Questions

Q: How much PoE power does the IESC1G80UP deliver per port?

A: Up to 30W per port under IEEE 802.3at, with a total switch power budget of 200W across all 8 ports.

Q: What operating temperature range does the IESC1G80UP support?

A: -40C to 75C, making it suitable for unconditioned outdoor cabinets and industrial enclosures.

Q: Is the IESC1G80UP a managed or unmanaged switch?

A: Evidence provided does not specify management features for this SKU; confirm management capability before purchase if that's a requirement.

Q: What power input does the IESC1G80UP accept?

A: 48-56VDC via terminal block, in addition to standard RJ-45 PoE ports.

Q: What's the warranty on the IESC1G80UP?

A: 2 years.

Q: Does the IESC1G80UP support both 802.3af and 802.3at PoE devices?

A: Yes, it supports both IEEE 802.3af and IEEE 802.3at standards.

Marty Allison

What stands out on the IESC1G80UP is the 200W PoE budget divided across just 8 ports — that's up to 30W per port under 802.3at, which is real headroom for PTZ cameras and heated enclosures rather than the thin 15.4W you get on a lot of unmanaged PoE switches.

Technical Highlights:

• 16Gbps switching fabric: enough to run all 8 Gigabit ports at line rate at once, so you're not oversubscribing bandwidth as the camera count fills out.
• -40C to 75C operating range: this is the number that matters most for field installs — it clears most industrial and outdoor cabinet specs without supplemental heating or cooling.
• 693,764 hour MTBF: a reliability figure worth checking against your maintenance access — this switch is built for locations where a failure means a truck roll, not a walk down the hall.

Deployment Considerations:

• The 48-56VDC terminal block input is a plus for vehicle, rail, or DC-powered cabinet installs, but confirm your power source matches before ordering — this isn't a standard AC-input switch.
• IP-30 housing means dust protection in an open panel, not a sealed enclosure — if the mounting location sees direct rain or spray, plan for a rated enclosure around it.

This is the switch to spec for an outdoor camera pole run or an unheated equipment cabinet feeding four to eight PTZ or heated-housing cameras where 802.3af-only switches keep tripping their power budget.