Middle Atlantic 6IN EVO Surface CVR Assy - 6CTC2GYTR

Middle Atlantic 6CTC2GYTR EVO Surface Cover Assembly

Overview

The Middle Atlantic 6CTC2GYTR is a surface-mount cover assembly for the 6CT Evolution poke-through device series, designed to provide a clean, floor-level termination point for power and data in commercial AV, conference room, and integrated security installations. At 7.75 in wide by 7.25 in tall, the cover sits flush against the floor surface rather than recessing into it — making it the right choice when slab depth or retrofit constraints prevent a fully recessed installation. If you are specifying Middle Atlantic infrastructure products for a new build or renovation, this cover assembly slots directly into the 6CT Evolution poke-through ecosystem without additional adapters.

The gray finish is a neutral, professional choice that blends with standard commercial carpet tile and hard flooring in corporate and government environments. For integrators working across multiple AV infrastructure deployments, stocking the 6CTC2GYTR in gray reduces site-specific SKU proliferation where a single color covers the majority of floor finishes.

Key Features

• Surface Cover Style: The 6CTC2GYTR mounts on top of the floor surface rather than recessing into the slab. This matters on retrofit jobs where cutting a deeper core is not feasible — you preserve the structural floor while still delivering a managed termination point for power and data at the workstation or AV position.
• 7.75 in × 7.25 in Footprint: The 19.7 cm × 18.4 cm form factor is sized to the 6CT Evolution device body. Confirm your poke-through rough-in matches the 6CT series before ordering — this cover is not a universal fit across competing floor box platforms.
• Tamper-Resistant Receptacles: The tamper-resistant receptacle configuration meets safety requirements for installations where public access, classroom use, or AHJ compliance mandates TR-rated outlets. This removes the need for a field swap to TR devices after rough-in, saving labor on sites where TR is a specification requirement rather than an afterthought.
• Gray Color Finish: Neutral gray coordinates with commercial-grade carpet tile, polished concrete, and LVT in typical corporate, government, and hospitality environments. Reduces visible contrast at floor level, keeping the installation professional without custom finishes.
• TAA Non-Compliant: The 6CTC2GYTR is not TAA compliant. If your project is a federal government contract subject to Trade Agreements Act requirements, this unit does not qualify. Verify TAA status requirements before specification — Middle Atlantic offers other products in the EVO line that may address government procurement rules.
• EVO Series Ecosystem: Designed as part of the poke-through floor box EVO product family from Middle Atlantic (a Legrand brand). Cover assemblies in this series are engineered to the same dimensional standards as the device bodies, so field fitment is straightforward without modification.

Integration and Compatibility

The 6CTC2GYTR cover assembly is compatible with the 6CT Evolution poke-through device series. It is not a standalone electrical device — it pairs with the underlying poke-through body that handles the electrical rough-in. Integrators specifying this cover for conference tables, boardrooms, training rooms, or conference room AV installations should confirm the matching device body SKU and conduit stub-up requirements before committing to this surface-mount configuration. The tamper-resistant receptacle designation is built into this cover assembly, so the compatible device body must support TR-rated inserts.

For projects requiring a recessed profile — where the cover sits flush with or below the finished floor surface — a recessed cover variant in the 6CT EVO line is the appropriate selection. The surface configuration of the 6CTC2GYTR adds a small amount of profile above the finished floor, which is normal and expected for surface-mount floor box covers but should be noted in the as-built documentation for ADA path-of-travel review.

Frequently Asked Questions

Q: Is the Middle Atlantic 6CTC2GYTR TAA compliant?

A: No. The 6CTC2GYTR is confirmed not TAA compliant. Federal projects subject to Trade Agreements Act procurement rules should not specify this unit without verifying an exemption applies.

Q: What cover style is the 6CTC2GYTR — surface or recessed?

A: Surface. The 6CTC2GYTR mounts on top of the finished floor surface. If your installation requires a flush or recessed profile, select the recessed cover variant in the 6CT Evolution series instead.

Q: What receptacle type does the 6CTC2GYTR include?

A: Tamper-resistant receptacles. This is built into the cover assembly and is required for installations where the AHJ or project specification mandates TR-rated outlets.

Q: What are the dimensions of the 6CTC2GYTR?

A: The cover assembly measures 7.75 in (19.7 cm) wide by 7.25 in (18.4 cm) tall. These dimensions are specific to the 6CT Evolution poke-through platform — confirm dimensional compatibility before ordering for non-Middle Atlantic device bodies.

Q: What color is the 6CTC2GYTR?

A: Gray. This is a fixed color for this SKU — it is not available in alternate colors under this model number. Verify finish compatibility with your flooring material during specification.

Karl Wilson

The detail that matters most on the 6CTC2GYTR is the surface cover style — at 7.75 in × 7.25 in, this unit sits above the finished floor rather than recessing into the slab, which directly determines whether it fits your rough-in condition. On retrofit jobs where you cannot cut additional depth into the concrete, the surface-mount configuration is often the only compliant path forward, and the 6CTC2GYTR is engineered specifically for that scenario within the 6CT Evolution ecosystem.

Technical Highlights:

• Surface Mount Profile: Sits above the finished floor — correct for retrofit or shallow-slab conditions where a recessed cover would require core drilling that is not feasible or permitted.
• Tamper-Resistant Receptacles: TR designation is built into this cover assembly, satisfying NEC and AHJ requirements for public-access and educational spaces without a field swap after rough-in.
• TAA Non-Compliant: Confirmed not TAA compliant — a hard stop for federal contract work subject to Trade Agreements Act rules. Flag this in your submittal package before bid day.

Deployment Considerations:

• Verify the matching 6CT Evolution device body SKU before ordering the 6CTC2GYTR cover — this cover is dimensioned to the 6CT platform specifically and will not adapt to competing poke-through bodies without modification.
• The surface-mount profile adds height above the finished floor; include this in your ADA path-of-travel documentation and confirm it does not create a tripping hazard under local code for the floor area in question.

The 6CTC2GYTR is the right specification for corporate conference rooms, training facilities, and AV-integrated boardrooms on retrofit projects where a surface-mount termination is the only viable option and tamper-resistant receptacles are a code or spec requirement.