Middle Atlantic 6IN EVO Surface CVR Assy - 6CTC2BZTR

Middle Atlantic 6CTC2BZTR 6-Inch EVO Surface Cover Assembly

The Middle Atlantic 6CTC2BZTR is a surface-mount cover assembly for the 6CT Evolution poke-through device series — the finish piece that turns a rough floor or table cutout into a clean, professional connectivity point. At 7.75 in wide by 7.25 in tall, it sits flush and flat in surface configurations, delivering the polished look that AV integrators and facilities teams expect in boardrooms, training spaces, and open-plan offices. If you're deploying the 6CT EVO poke-thru system and need the topside cover that completes the installation, the 6CTC2BZTR in bronze is the assembly to specify.

Key Features

• Surface Cover Configuration: The 6CTC2BZTR is designed specifically for surface-style installations — meaning it mounts at floor or table level without the recessed setback of a flush cover. This matters in retrofit scenarios where you can't cut deep enough for a fully recessed fit, or where surface access is preferable for frequent module swaps.
• Bronze Finish: The bronze colorway integrates cleanly with hardwood floors, dark laminate surfaces, and warm-toned furniture common in executive and hospitality environments. Specifying the right cover color is often the detail that separates a professional installation from one that looks like an afterthought — bronze is the right call where silver or black would clash.
• Tamper-Resistant Receptacles: TR-rated outlets require deliberate simultaneous pressure to insert a plug, blocking casual or accidental insertion of foreign objects. In any space with public access — lobbies, conference areas, training rooms — this is a practical safety specification, not just a code checkbox. Many commercial building codes require TR receptacles in accessible locations, so specifying the 6CTC2BZTR with TR outlets keeps you ahead of the inspection.
• 7.75 in × 7.25 in Footprint: The cover assembly footprint is sized to the 6CT Evolution series cutout, so it integrates with the existing poke-thru body without modification. Measure your floor box opening against these dimensions before ordering — this cover is sized for the 6-inch EVO platform, not the 4-inch or 8-inch variants in the Middle Atlantic lineup.
• TAA Non-Compliant: The 6CTC2BZTR is not TAA-compliant. If your project is a federal installation, GSA schedule procurement, or any contract with TAA compliance requirements, verify with your procurement office before specifying this cover assembly. For commercial, corporate, or non-federal hospitality deployments, this is a non-issue.
• Middle Atlantic / Legrand AV Integration: As part of the Middle Atlantic product line under the Legrand AV portfolio, the 6CTC2BZTR is designed to integrate with the broader 6CT EVO poke-through ecosystem. This means consistent sizing, finish families, and module compatibility across a project — useful when you're outfitting an entire floor with matched connectivity points. Explore the full floor box and poke-through category to confirm series compatibility before ordering.

Integration and Compatibility

The 6CTC2BZTR cover assembly is purpose-built for the Middle Atlantic 6CT Evolution poke-through device series. It is not a universal cover — dimensional fit and module alignment are engineered to the 6CT EVO body. Before specifying this cover, confirm your installed or planned poke-thru body is within the 6CT EVO family. Mixing cover assemblies across series (e.g., pairing a 6CT cover with a 4CT body) will result in dimensional mismatches and improper seating.

The tamper-resistant receptacle configuration suits commercial occupancy categories where TR outlets are specified by the electrical contractor or required by NEC. If your project calls for non-TR standard receptacles or specific module configurations (HDMI, USB-C, data), verify the module options available for this cover assembly in the Middle Atlantic 6CT EVO product family before committing to this SKU. For AV infrastructure planning, review the AV connectivity and infrastructure accessories section for compatible modules and cable management options.

Bronze is one of several finish options across the EVO series. If your project requires black, silver, or ivory to match existing floor box hardware, confirm the equivalent cover assembly SKU for that finish. Finish consistency across a multi-unit deployment is worth resolving at the specification stage — field-substituting cover colors after installation is avoidable with upfront coordination. For larger infrastructure deployments, conference room AV infrastructure planning guides can help coordinate finish and module selections across zones.

Frequently Asked Questions

Q: What poke-through device is the 6CTC2BZTR designed to work with?

A: The 6CTC2BZTR is the surface cover assembly for the Middle Atlantic 6CT Evolution poke-through device series. It is not a universal cover — it is dimensionally matched to the 6CT EVO body and should not be paired with other series.

Q: Is the 6CTC2BZTR TAA compliant?

A: No. The 6CTC2BZTR is not TAA compliant. Federal procurements, GSA schedule projects, or contracts with TAA compliance requirements should verify an alternate SKU or waiver before specifying this product.

Q: What does tamper-resistant receptacle mean on this cover?

A: Tamper-resistant (TR) receptacles have internal shutters that require simultaneous insertion pressure on both slots to open, preventing accidental or deliberate insertion of foreign objects. This is required by the NEC in certain occupancy types and is standard practice in spaces with public or unsupervised access.

Q: What are the cover dimensions?

A: The 6CTC2BZTR measures 7.75 inches wide by 7.25 inches tall (19.7 cm × 18.4 cm). Verify your floor cutout and poke-thru body dimensions match before ordering.

Q: Can this cover be used in a recessed (flush) installation?

A: No. The 6CTC2BZTR is a surface-style cover assembly. For recessed/flush mount configurations, you need the appropriate flush cover assembly within the 6CT EVO product family.