Middle Atlantic 6IN EVO Surface CVR Assy - 6CTC2BK

Middle Atlantic 6CTC2BK 6-In EVO Surface Cover Assembly

Overview

The Middle Atlantic 6CTC2BK is a surface-mount cover assembly designed for the 6CT Evolution poke-through device series. At 7.25 × 7.25 inches with a 1.16-inch depth, this black cover provides a clean, finished appearance over surface-installed poke-thru floor or table boxes — the kind of detail that separates a professional AV or security integration from an exposed conduit job. If you're finishing out a conference room, huddle space, or collaboration area with structured connectivity, this is the cap that makes the installation look intentional. Browse the full Middle Atlantic catalog for compatible poke-through and cable management solutions.

Key Features

• Surface Cover Style: Designed specifically for above-surface mounting — when a recessed installation isn't feasible or desired, this cover style sits flush against the mounting surface and keeps the connection point protected and presentable without requiring a floor cutout or recessed cavity.
• Standard Receptacle Type: Accepts standard receptacle modules, so you're not locked into proprietary inserts. This matters when you need to swap out power, data, or AV module types as room configurations change — a common scenario in flexible workspace and cable management deployments.
• 7.25 × 7.25 in Footprint: The square format covers the poke-thru opening cleanly without an oversized plate that draws attention. At just 1.16 inches of depth, the profile stays low — no trip hazard, no visual bulk on a conference table or floor installation.
• Black Finish: Coordinates with dark table surfaces and modern furniture finishes common in corporate and higher-ed environments. If your furniture spec calls for a neutral dark finish, this fits without custom ordering.
• TAA Non-Compliant: Note that the 6CTC2BK is not TAA compliant. Federal government projects or GSA-schedule bids with TAA requirements will need to verify an alternative SKU in the Middle Atlantic EVO line.

Integration & Compatibility

The 6CTC2BK is part of Middle Atlantic's 6CT Evolution poke-through series. It pairs with the 6CT poke-through body — verify your base unit model before ordering this cover to confirm the surface-mount style matches your installation. For AV furniture and rack infrastructure projects requiring recessed cover styles or alternate finishes, review the full 6CT Evolution accessory lineup for the correct variant. This cover is not an active electronic component and carries no power, data, or signal — it is a purely mechanical finishing assembly.

Frequently Asked Questions

Q: What is the 6CTC2BK compatible with?

A: The 6CTC2BK is a surface cover assembly for Middle Atlantic's 6CT Evolution poke-through device series. Verify compatibility with your specific 6CT base unit before ordering.

Q: Is the 6CTC2BK TAA compliant?

A: No. The 6CTC2BK is not TAA compliant. Government or GSA projects with TAA requirements should evaluate an alternate SKU in the 6CT Evolution lineup.

Q: What are the dimensions of the 6CTC2BK?

A: The cover measures 7.25 × 7.25 inches (18.4 × 18.4 cm) with a depth of 1.16 inches (3 cm).

Q: What receptacle type does the 6CTC2BK support?

A: Standard receptacle type. It is not designed for proprietary or specialty module formats.

Q: Can the 6CTC2BK be used for recessed installations?

A: No. The 6CTC2BK is specifically a surface cover assembly. For recessed installations, a different cover style in the 6CT Evolution series is required.

Ted Perry

The 6CTC2BK comes up in finish-out conversations more often than you'd expect. Once the 6CT Evolution poke-through body is set in the floor or table, the cover assembly is the only thing the end user sees — and this 7.25 × 7.25 in black surface cap is what keeps the job from looking incomplete. It's a small part, but specifying the wrong style (surface vs. recessed) creates a visible mismatch that's a headache to correct after furniture is in place.

Technical Highlights:

• Surface Cover Style: Explicitly designed for above-surface mounting — if your 6CT installation does not have a flush-recessed finish requirement, this is the correct cover variant. Mixing surface and recessed covers on the same table run looks unprofessional.
• 1.16-In Depth Profile: Low enough that it won't conflict with chair clearance or create a snag point on a conference table surface. Slim profile is a deliberate design choice in the Evolution series.
• Standard Receptacle Format: Gives you flexibility to populate with common power or data modules as room needs evolve, without sourcing a proprietary replacement cover.

Deployment Considerations:

• Confirm the 6CT Evolution base unit is already specified or on-site before ordering this cover — the 6CTC2BK is the finishing cap, not the functional poke-through body itself.
• TAA non-compliant status is a hard stop for federal procurement; flag this early in the spec process if there's any government-use angle on the project.

Best fit for corporate conference rooms, higher-ed collaboration spaces, and hospitality AV builds where a surface-mount poke-through finish in black coordinates with the furniture spec and the project doesn't carry TAA requirements.