2N 03359-001 IP Force 2.0 Single-Button Audio Intercom
The 2N 03359-001 is a single-button IP audio intercom built on the ARTPEC-8 processor platform for access control and facility communication in industrial and enterprise environments. This second-generation design strips away unnecessary complexity—one button means minimal user training and faster deployment at high-traffic access points. Audio-only endpoints like this one avoid the cost and bandwidth overhead of video, making them ideal where you need voice communication but not a camera feed. Deploy it alongside your IP surveillance infrastructure without network congestion concerns; audio-only streams consume a fraction of the bitrate video requires.
Key Features
- Single-button operation: Eliminates menu navigation and mode switching. One press triggers one action—critical for public-facing installations (visitor kiosks, emergency call stations, loading dock handoff points) where user confusion or hesitation creates delays or misdirected calls.
- ARTPEC-8 processor: Delivers stable network performance in IP-based deployments and ensures reliable voice transmission even under load. Integrates cleanly with standard network infrastructure and IP-based access control systems that support ONVIF or proprietary 2N protocols, simplifying provisioning across mixed-vendor environments.
- Integrated noise suppression: Maintains voice clarity in noisy industrial environments—loading docks, parking facilities, outdoor gates—where ambient machinery, traffic, or wind typically exceeds 70–80 dB. Without active noise suppression, audio intelligibility drops sharply in these settings; this feature preserves conversation quality without requiring the caller to shout.
- H.264 compression: Keeps bandwidth requirements modest and storage footprint low if audio is archived. Audio-only streams consume roughly one-tenth the bitrate of video, so network planning is simpler, switch port utilization stays low, and storage retention windows extend significantly—a real advantage on systems with limited disk capacity.
- PoE (IEEE 802.3af) power: Draws under 13W, so it won't strain your switch's power budget. No separate power supply or conduit runs required; standard network cabling handles both data and power, reducing installation complexity and cost in retrofit scenarios.
- Durable industrial construction: Built to survive vibration, temperature swings, and incidental impacts in warehouses, manufacturing facilities, and outdoor mounting scenarios. Matches the ruggedness expected in non-climate-controlled spaces where residential-grade electronics fail within months.
- Enhanced security architecture: Second-generation design incorporates hardened security principles appropriate for access control endpoints that may be exposed to tampering or network reconnaissance in shared or semi-public areas. Protects against common endpoint attack vectors.
- Two-way audio: Bidirectional voice communication means both parties can hear and respond in real time—essential for access verification, delivery coordination, emergency alerts, and remote instruction scenarios where one-way announcement isn't sufficient.
Integration & Compatibility
The 2N 03359-001 integrates with standard IP-based access control and building management systems via network protocols supported by the ARTPEC-8 platform. Voice communication is straightforward—no special codecs or licensing required—making it compatible with most enterprise IP PBX systems and analog integrations via VoIP gateways. Install it on the same network as your IP cameras and surveillance infrastructure without bandwidth conflicts, provided your network is properly segmented and your PoE switches have adequate power budgeting for mixed endpoint loads. A single IEEE 802.3af port supplies power and connectivity; most enterprise switches have ample capacity for dozens of these endpoints.
Ideal Applications
- Building entry gates and access control booth communication
- Warehouse loading dock and yard intercoms
- Parking facility gate and barrier communication
- Emergency call stations and alert endpoints
- Visitor reception and badge pickup stations
- Industrial facility maintenance and shift handoff communication
- Outdoor emergency call boxes (with weatherproof housing)
When to Choose a Different Model
If you need visual identification of visitors or require facial recognition for access verification, add a dedicated IP camera alongside this audio endpoint, or switch to a video intercom in the 2N product family. If your environment demands multi-button functionality (routing to different departments, call queues, or predefined destinations), evaluate 2N models with expanded button arrays; single-button simplicity isn't a limitation—it's a feature—so confirm it matches your workflow before committing. For applications with extreme noise—airport ramps, blast areas, heavy machinery zones—confirm that the integrated noise suppression performance meets your specific dB targets by testing a unit in the actual environment first. If audio must be archived for compliance or dispute resolution, ensure your NVR or edge recorder is configured to capture and store H.264 audio streams; most systems support this out-of-the-box, but verify before deployment.
Frequently Asked Questions
Q: Is the 2N 03359-001 weatherproof for outdoor mounting?
A: The unit is built for industrial environments and is durable, but confirm the specific IP rating and environmental limits with the manufacturer datasheet. If full weather protection (rain, snow, direct sunlight) is required, consider a weatherproof enclosure or mount it under an eave.
Q: Does the 03359-001 work with my existing IP PBX?
A: Yes. The unit supports standard VoIP codecs and integrates with most enterprise IP PBX systems via standard network protocols. No special licensing or proprietary gateway is needed; verify ONVIF or SIP compatibility with your PBX vendor during design.
Q: How much bandwidth does the 2N 03359-001 consume?
A: Audio-only H.264 streams typically consume 64–128 kbps depending on codec settings and sample rate. This is negligible on modern networks; even 100+ endpoints on a single 1 Gbps segment won't create congestion.
Q: Can I power the 03359-001 from a non-PoE power injector?
A: The device is designed for IEEE 802.3af PoE. Using a non-standard power source may damage the unit or void warranty. Use a certified PoE switch or injector that delivers 802.3af power.
Q: What's the expected lifespan of the 2N 03359-001 in a warehouse environment?
A: Industrial design with durable components typically supports 7–10 years of continuous operation in non-climate-controlled spaces, assuming proper power delivery and network hygiene. Actual lifespan depends on temperature extremes, humidity, and maintenance practices.
Q: Does the noise suppression work with any speaker or just specific models?
A: Integrated noise suppression operates on the audio stream itself, not on external speakers. It works with any speaker connected to your PBX or intercom system. Noise suppression is active on both the incoming (microphone) and outgoing (speaker) paths.
Jerry TildsenPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The 2N 03359-001 solves a specific problem: you need reliable audio intercom at an access point, but adding a video camera would blow your budget, exceed network capacity, or create privacy pushback from staff. The ARTPEC-8 processor ensures the 03359-001 stays responsive even when your network carries heavy camera traffic elsewhere. PoE power (IEEE 802.3af, under 13W) means you can retrofit it into existing switch infrastructure without a power audit. The noise suppression matters more than the spec sheet suggests—I've seen loading dock intercoms fail because wind and machinery drowned out the audio; this unit handles that scenario.
Technical Highlights:
- H.264 audio compression: Reduces bandwidth to 64–128 kbps, so you can deploy dozens of these endpoints on a single network segment without degrading video streams on the same switch. Real-world benefit: a 100-port PoE switch can support 50+ audio intercoms plus dozens of cameras without network redesign.
- Integrated noise suppression: Filters out ambient machinery and traffic noise in real time, maintaining intelligible speech even in 75+ dB environments. Without it, outdoor or dock-side units are nearly unusable during peak activity.
- Single-button design: Eliminates user training friction. Visitors, delivery drivers, and contractors don't need instruction—press once, talk. Fewer misdialed calls and faster throughput at high-traffic gates.
- ARTPEC-8 stability: Proven processor platform used in dozens of 2N endpoints; minimal driver conflicts or firmware bugs. Network integrators trust it for critical access points.
Deployment Considerations:
- PoE power budget: At under 13W, the 03359-001 draws light load, but if you're daisy-chaining dozens of endpoint types (cameras, access controllers, readers, intercoms), map your total wattage against switch capacity. Most enterprise PoE+ or PoE++ switches handle it, but don't assume.
- Audio routing: The unit outputs audio to your IP PBX or intercom system. If you're integrating with an older analog intercom backbone, you'll need a SIP gateway or ATA (analog telephony adapter). Confirm compatibility with your comms vendor before purchasing.
- Noise suppression tuning: Out-of-the-box settings work well for typical industrial noise (machinery, wind, traffic). Extreme noise environments (pneumatic presses, motors) may require firmware tuning or repositioning the microphone. Test in the actual location if noise is borderline.
The 03359-001 is the right choice for access control gates, warehouse docks, and outdoor call stations where you need reliable two-way audio without the complexity, cost, or bandwidth overhead of video. It's not a replacement for a video intercom at a main entrance (where facial recognition or visitor image capture matters), but it's ideal for secondary or service access points where speed and simplicity win.