2N 01303-001 Flush Mount IP Intercom
The 2N 01303-001 is a flush-mounted IP intercom accessory engineered for direct integration into contemporary access control and entry communication systems. Its form factor positions it as a mounting solution that disappears into wall or frame installations—critical when aesthetics matter alongside security function. Powered via PoE, it eliminates the need for dedicated 24VDC infrastructure, reducing installation labor and simplifying troubleshooting on sites already running Ethernet backbone.
Key Features
- Flush Mount Design: Installs recessed into wall or frame cavities, leaving no protruding hardware. Matters on renovation projects or where architectural continuity is a spec requirement; skip this if surface-mount is acceptable or preferred.
- PoE Powered (802.3af): Draws power directly from your Ethernet run—no separate 24VDC PSU required. Reduces wiring passes and eliminates a single point of failure. Confirm your PoE switch or injector has available budget; a single unit won't strain a modern switch port.
- HD Camera: High-definition image capture for visitor identification at the entry point. Exact resolution not specified in available technical data; verify against your recording and license-plate recognition requirements if those are deployment criteria.
- Single-Button Operation: Minimalist call interface reduces user error and maintenance wear. Suitable for common-area or lobby installations where visitors expect intuitive operation; not a limitation if you're deploying alongside a VMS or mobile app workflow.
- Smartphone Integration: Direct mobile device connectivity enables remote call answering and visitor interaction. Requires your facility network to support app-based SIP or proprietary protocol; confirm compatibility with your existing desk phones and call-handling infrastructure before specifying.
- Professional Black Finish: Matte or satin black casing blends into modern entry frames and wall treatments. Durability against scratches and weathering not detailed; request finish samples if high-traffic or exposed mounting is planned.
Integration & Compatibility
The 01303-001 integrates with 2N IP communication devices and supports standard IP and Ethernet protocols. Network connectivity includes both wired Ethernet and Wi-Fi compatibility, allowing flexible placement in retrofit or new-build scenarios. Confirm your access control panel, door station software, or VMS vendor supports 2N SIP endpoints or ONVIF intercom profiles before finalizing procurement. Review PoE power planning for IP devices to ensure your switch or injector meets the 01303-001's draw requirements and provides headroom for expansion.
Typical Deployments
Commonly deployed in modern office lobbies, multi-tenant residential entry systems, and corporate campus gateways where flush mounting preserves sightlines and architectural design. The PoE constraint makes it suitable for sites with existing Ethernet infrastructure; if you're running new cabling anyway, verify labor estimates for both Ethernet and 24VDC runs to justify the PoE savings. The single-button model works well paired with NVRs running Milestone or similar VMS that can log calls and trigger door-unlock relays via third-party integrations.
When to Choose a Different Model
If your architectural spec prohibits any recessed mounting or wall penetration, consider surface-mount variants in the 2N family. If your site lacks PoE infrastructure and running new Ethernet is not feasible, evaluate 24VDC-powered intercom solutions. If HD resolution or single-button simplicity is insufficient for your visitor management workflow, review IP intercom selection guidance to compare multi-key or integrated display options.
What's in the Box
Package contents for the 01303-001 are not specified in available technical documentation. Contact the manufacturer or your integrator for a precise packing list, which typically includes the intercom unit, mounting brackets, and basic installation templates.
Frequently Asked Questions
Q: Does the 2N 01303-001 require a separate power supply?
A: No. The unit is powered entirely via PoE (Power over Ethernet) delivered through your standard Ethernet cable. No separate 24VDC PSU or transformer is required, simplifying wiring and reducing the failure points in your system.
Q: Can I integrate the 01303-001 with my existing VMS or access control system?
A: The unit supports standard IP and Ethernet protocols. Confirm your VMS (Milestone, Genetec, etc.) or access control panel explicitly supports 2N SIP endpoints or ONVIF intercom profiles. Not all systems treat third-party intercoms equally; test integration before specifying across a multi-site rollout.
Q: What is the exact camera resolution of the 01303-001?
A: The available technical documentation specifies HD (high-definition) resolution but does not provide exact megapixel count or sensor dimensions. Request a detailed datasheet from the manufacturer if license-plate capture or facial ID is a requirement in your deployment.
Q: Is the 01303-001 suitable for outdoor or weatherproof mounting?
A: The available specifications do not include an IP (ingress protection) rating or operating temperature range. For outdoor, rain-exposed, or harsh-environment installations, verify environmental ratings directly with the manufacturer. Flush mounting may offer some environmental shielding if your installation frame includes weatherproofing, but this is not guaranteed by the unit alone.
Q: What smartphone platforms or apps does the 01303-001 support?
A: The documentation confirms smartphone integration capability but does not specify iOS, Android, or proprietary app requirements. Request compatibility details and app store links from the manufacturer or your reseller before procurement.
Q: How much Ethernet bandwidth or PoE power does the 01303-001 consume?
A: Exact power draw (watts) and bandwidth utilization are not detailed in available technical data. For accurate PoE budget and network load calculations, request the full datasheet from the manufacturer. This is critical when adding multiple units to a single switch or injector.
Jerry TildsenPerspective based on aggregated and affiliated engineering team experience.
The 2N 01303-001 is fundamentally a form-factor choice, not a feature-rich intercom on its own. Its flush-mount envelope and PoE dependency define the deployment story. The HD camera and single-button design are minimalist by design—suitable for facilities where entry points are simple and visitor traffic is low to moderate. Where this unit excels is in modern renovation and new-build scenarios where your installer can plan Ethernet runs and wall cavity depths from day one.
Technical Highlights:
- PoE-Only Power Model: No 24VDC transformer or dedicated power drops required. On a campus with existing PoE infrastructure, this cuts installation cost and complexity. On a retrofit into a legacy 24VDC environment, you're adding Ethernet runs anyway, which negates the savings argument.
- Flush Recessed Mounting: Disappears into wall or door frame installations. Critical for architectural continuity in corporate lobbies or high-end residential; irrelevant if your site standard is exposed surface-mount door stations.
- HD Camera Capture: Exact resolution unspecified in available data. Confirm whether your license-plate recognition or visitor image-retention policies demand 2MP, 5MP, or higher before finalizing the purchase order.
Deployment Considerations:
- VMS Integration Gamble: SIP endpoint and ONVIF profile support are not explicitly confirmed. This is a real gotcha—test integration with your chosen VMS in a lab environment before rolling out across multiple facilities.
- Single-Button Limitation: For high-traffic lobbies or multi-department routing, a single call button may not be sufficient. If your spec includes call queuing, department selection, or emergency prioritization, this unit won't deliver it. You'll need a companion keypanel or display-equipped intercom.
- Environmental Rating Ambiguity: No IP or operating temperature range specified. If your flush-mount cavity is near an outdoor wall or in a loading dock with temperature swings, request environmental durability confirmation from the manufacturer before spec'ing.
Position the 01303-001 for modern office campuses, upscale apartment lobbies, and new construction projects where PoE and Ethernet infrastructure is planned alongside HVAC and electrical from the outset. It's a solid fit for integrators comfortable with SIP protocols and VMS API work. For facilities with legacy 24VDC intercom networks or those requiring sophisticated call routing, evaluate multi-button or display-equipped variants in the 2N family instead.
