Panduit STP6X10YL TX6A 10Gig Cat 6A S/FTP Patch Cord - 10ft Yellow
The Panduit TX6A STP6X10YL delivers 10GBASE-T performance in a shielded patch cord engineered for high-density datacenter and enterprise networking environments. This 10-foot yellow Cat 6A S/FTP cord features 26 AWG stranded copper conductors with full shield coverage, providing superior EMI/RFI protection in electrically noisy environments while exceeding ANSI/TIA-568.2-D Category 6A and ISO 11801 Class EA channel requirements. Built with Panduit's tangle-free latch design and slender strain relief boots, it simplifies installation in congested patch panels and switch ports where every millimeter of clearance matters. RapidID pre-installed barcodes enable rapid port documentation using Panduit's cable management software, eliminating manual labeling and reducing deployment time for structured cabling installers.
Key Features
- TX6A 10Gig performance supports 10GBASE-T applications up to 100 meters, backwards compatible with Cat 6, 5e networks
- S/FTP shielded construction with individual foil-wrapped pairs and overall braid shield for maximum EMI/RFI rejection
- Tangle-free latch prevents snags during installation and removal, reducing cable damage and technician frustration in dense patch fields
- Slender strain relief boot measures narrower than standard boots, allowing closer port spacing and easier finger access in high-density 48-port environments
- RapidID pre-installed barcode labels integrate with Panduit cable management software for automated port mapping and documentation
- 26 AWG stranded copper conductors provide flexibility for tight bend radius installations without conductor breakage
- Rated for 2500 insertion cycles with IEEE 802.3af/at/bt PoE/PoE+/PoE++ type 3 and type 4, supporting up to 90W power delivery
- CM/LSZH dual-rated jacket meets NEC Article 800 plenum-substitute requirements and low smoke zero halogen regulations for international deployments
- UL 1863 approved modular plugs with gold-plated contacts ensure reliable 10Gbps signal integrity over the cord's service life
- Yellow jacket simplifies visual circuit tracing in mixed-infrastructure installs (voice/data/security network segregation)
Panduit's TX6A patch cord line addresses the performance gap between legacy Cat 6 infrastructure and modern 10GBASE-T switching. The S/FTP shielded construction uses individually foil-wrapped pairs beneath an overall tinned copper braid shield, delivering 360-degree coverage that meets ISO/IEC 11801 Class EA alien crosstalk (ANEXT) limits without relying on tight twist rates alone. This matters in environments where unshielded cables run parallel to AC power feeds, VFD motor controls, or other RFI sources—security installers frequently encounter this in industrial facilities, hospitals, and retrofit builds where low-voltage pathways share conduit or cable tray with electrical infrastructure. The 26 AWG stranded conductors flex through tight 90-degree bends behind equipment racks without the conductor fatigue failures common in solid-conductor patch cords, while maintaining the 10GBASE-T insertion loss budget at the full 100-meter channel length when paired with Panduit TX6A jacks and horizontal cable.
The tangle-free latch design solves a persistent problem in production network environments: standard RJ45 latches catch on adjacent cords during moves/adds/changes, requiring technicians to extract multiple cables to free a single port. Panduit's low-profile latch clears neighboring cords while still providing positive retention—critical when managing switch-to-switch uplinks, storage network connections, or IP camera PoE++ feeds where accidental disconnection causes visible downtime. The slender boot measures 18mm wide versus 22-24mm for standard molded boots, providing the clearance needed for Category 6A's larger conductor bundle without blocking adjacent ports on Cisco, Aruba, or Juniper switches with 1.5mm port spacing. RapidID barcode integration feeds directly into Panduit's Physical Infrastructure Manager (PIM) software, auto-populating port-to-device mappings that satisfy SOC 2, HIPAA, and PCI-DSS audit requirements for documented network topology—eliminating the manual spreadsheet reconciliation that consumes billable hours on enterprise cabling projects.
This cord is rated for 2500 insertion/removal cycles under IEEE 802.3bt PoE++ type 3 (60W) and type 4 (90W) loads, exceeding the 750-cycle baseline in ANSI/TIA-568.2-D by a 3.3x margin. That endurance matters for access control panels, PTZ cameras, Wi-Fi 6E access points, and other PoE-intensive edge devices that see frequent hardware swaps during troubleshooting or technology refresh cycles. The CM/LSZH jacket carries both NEC communications riser (CM) approval for vertical cable runs and IEC 60754-1/61034-2 low-smoke zero-halogen certification for European and international projects governed by EN 50575 CPR regulations. Panduit ships this cord in cartons of 10, making it a stocked line item for integrators managing datacenter buildouts, hospital IT infrastructure, or multi-building campus networks where Cat 6A represents the minimum acceptable backbone standard for converged IP video, access control, and building automation traffic.
