Panduit LDPH5WH10-A Pan-Way Surface Raceway

The Panduit LDPH5WH10-A delivers a power-rated surface raceway solution for low-voltage and data cable routing in retrofit and new-construction commercial environments. This two-piece latching raceway handles applications up to 600 V, ships in 10-foot lengths, and combines pre-punched mounting holes with factory-applied adhesive backing to cut installation time on baseboards, perimeter walls, and ceiling drops. UL5A Listed and TIA/EIA compliant, the LDPH5 series addresses code requirements for schools, hospitals, offices, and institutional spaces where conduit runs are impractical or cost-prohibitive.

Key Features

• Power-rated construction supports applications up to 600 V for mixed low-voltage and data cable runs
• Two-piece hinged latching cover allows cables to be laid in without end-feeding—eliminates pre-termination hassles
• Factory-applied adhesive backing plus pre-punched mounting holes for dual-method installation flexibility
• 1.02" W × 0.55" H (26 mm × 14 mm) low-profile channel blends with trim and baseboard lines
• UL5A Listed, UL94V-0 flame-rated, FT4 compliant, and meets TIA/EIA structured cabling standards
• White PVC finish matches standard commercial trim and paintable for custom color coordination
• Compatible with Panduit Mini-Com surface mount boxes and LDPH series fittings for complete pathways

Retrofit cable routing in occupied spaces demands minimal disruption, clean aesthetics, and code compliance. The LDPH5WH10-A meets all three: the hinged two-piece design opens along its length for drop-in cable placement, the adhesive backing bonds to painted drywall and wood trim without fasteners in light-duty runs, and the pre-punched holes accept screws for permanent anchorage in high-traffic zones or where pull tension exceeds adhesive ratings. The 10-foot stick length reduces joints on long perimeter runs—fewer seams mean fewer dust traps and a cleaner finished appearance on conference room baseboards or classroom perimeter walls.

UL5A Listing qualifies the raceway for plenum-equivalent fire safety in non-plenum applications, while UL94V-0 and FT4 ratings satisfy AHJ flame-spread requirements in institutional and healthcare occupancies. TIA/EIA compliance ensures the raceway meets structured cabling pathway standards for Category 6A and fiber trunk distribution, and the 600 V power rating allows mixed voice/data/low-voltage lighting or access control wiring in a single channel—reducing material costs and wall clutter compared to separate pathways. The 1.02" width accommodates up to four Cat 6 cables or two 12/2 low-voltage power pairs with proper fill ratios, and the hinged cover latches positively without clips or fasteners that break during service access.

White PVC ships ready to install and accepts latex paint for field color-matching to trim or wall finishes. The raceway terminates cleanly into Panduit Mini-Com surface mount boxes for outlet and connector terminations, or mates with LDPH series elbows, tees, and couplings for corner transitions and branch routing. For commercial integrators running IP cameras, card readers, or door contacts in historic buildings, tenant spaces, or retrofit projects where in-wall fishing is impractical, the LDPH5WH10-A provides a UL-Listed, TIA-compliant pathway that installs in minutes per stick and passes inspection on the first walk.