Zebra CRD-ET4X-4S8I1-01 4-Slot Charge-Only Cradle
Overview
The Zebra CRD-ET4X-4S8I1-01 is a charge-only multi-device cradle engineered to charge four 8" Zebra ET4X tablets simultaneously. This configuration is purpose-built for warehouse, logistics, and field-service operations where device rotation speed directly affects throughput. The ShareCradle form factor minimizes staging footprint while keeping charged tablets organized and ready for the next shift or route. Unlike communication or data cradles, the charge-only design eliminates I/O pass-through complexity—you're powering devices, not managing serial or Ethernet connections during dock cycles.
Key Features
- Four-Slot Configuration: Charges up to four ET4X tablets in parallel, cutting device turnaround time in half compared to single-unit chargers. Critical in high-volume picking, receiving, or delivery operations where downtime per device translates directly to labor cost.
- Charge-Only Design: No data sync, no communication lines to manage. Simpler deployment, fewer integration points, lower failure surface. Reduces IT overhead when tablets are already provisioned via MDM before docking.
- ET4X Compatibility: Built specifically for the Zebra 8" ET4X tablet platform. Mechanical and electrical alignment is factory-engineered—no guesswork on contact pressure, alignment, or thermal profiles.
- ShareCradle Form Factor: Compact footprint reduces staging-area real estate requirements. Particularly valuable in tight warehouse offices, loading docks, or vehicle charging stations where space is at a premium.
- Rapid Power Cycling: Supports fleet-wide device rotation in shift-change or end-of-day scenarios. Devices queue in the cradle during brief breaks, eliminating battery-swap labor in mission-critical environments.
- Integration-Ready: Fits into existing Zebra mobile device workflows and workstation setups. No separate power management software required if your environment already uses Zebra's MDM tools or third-party EMM.
Integration & Compatibility
The CRD-ET4X-4S8I1-01 integrates into standard warehouse and logistics IT stacks where mobile computers and tablets are centrally managed via EMM platforms. Compatible with Zebra ET4X tablets across all regional SKUs. Mounts in standard workstations, staging tables, or vehicle mounting systems where compact cradles fit existing infrastructure. If your deployment already uses Zebra mobile device accessories (mounts, power cables, docks), the CRD-ET4X-4S8I1-01 follows the same industrial-grade design practices—consistent latching, thermal management, and connector durability.
Frequently Asked Questions
Q: Is the CRD-ET4X-4S8I1-01 compatible with older Zebra tablet models?
A: No. The CRD-ET4X-4S8I1-01 is engineered specifically for the 8" ET4X platform. Mechanical fit and connector alignment are not backward compatible with ET50 or earlier models.
Q: Does the cradle support data synchronization or communication?
A: No. The CRD-ET4X-4S8I1-01 is charge-only. It does not transfer data, sync settings, or communicate with back-end systems. Tablets must be provisioned before docking.
Q: What is the typical charge time for four ET4X tablets?
A: Charge duration depends on battery capacity, current draw, and AC supply voltage. Consult the ET4X battery specifications and AC adapter output for precise time estimates. The cradle supports parallel charging at full rated current to all four slots.
Q: Can the cradle be wall-mounted or must it sit on a table?
A: Mounting configuration depends on your staging layout and available infrastructure. Refer to the datasheet for mechanical dimensions and recommended mount points. Tabletop deployment is standard; wall or shelf integration requires site-specific assessment.
Q: What power specifications are required to operate the CRD-ET4X-4S8I1-01?
A: Detailed power input requirements (voltage, current, connector type) are in the manufacturer datasheet. Standard industrial AC or field-provided power is typical. Verify supply capacity matches the aggregate current draw of four simultaneous charging sessions.
Q: Is there a warranty on the CRD-ET4X-4S8I1-01?
A: Warranty terms are available in the official Zebra product datasheet and sales documentation. Contact your specialty distributor or Zebra directly for coverage details and support options.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The CRD-ET4X-4S8I1-01 is a straightforward accessory: four parallel charging slots in a compact footprint. It's not sophisticated, but it solves a real problem in high-rotation tablet deployments. If you're running a warehouse or field operation with ET4X devices, the question isn't whether you need charging infrastructure—it's how many devices you can keep in use while others are docked and topped up. The four-slot charge-only design means devices spend less time waiting for power and more time in the field.
Technical Highlights:
- Four Parallel Charging Slots: Each slot charges independently and simultaneously, so four tablets reach full capacity in the same wall-clock time as a single device on a traditional charger. In shift-based operations, this directly reduces the number of spare tablets you need to carry as spares.
- Charge-Only Architecture: No data sync, no communication protocol overhead. Tablets arrive pre-configured via MDM; the cradle just powers them. This reduces deployment complexity and IT touch per device-rotation cycle.
- ShareCradle Compact Form Factor: Smaller footprint than multi-function data cradles, which means it fits into tight dock areas, vehicles, or office corners. Valuable in space-constrained logistics hubs.
Deployment Considerations:
- Verify your AC power supply has sufficient headroom for four simultaneous charging sessions. Aggregate current draw can be substantial during parallel charging; undersized power supplies will throttle charge rate or trigger breakers.
- The charge-only design assumes your tablets are already provisioned and synchronized before dock time. If you depend on cradle-time communication or data pull-down, you'll need a separate data cradle or Wi-Fi sync strategy.
Best suited for high-volume parcel and freight operations, warehouse receiving lines, and field-service fleets where device availability directly affects labor utilization. In those scenarios, the CRD-ET4X-4S8I1-01 is a cost-effective power multiplier.
