Zebra CRD-TC2R-BS4CG-01 4-Slot Charge-Only Cradle
Overview
The Zebra CRD-TC2R-BS4CG-01 is a four-slot charge-only cradle purpose-built for Zebra TC22R mobile computers. This accessory enables simultaneous charging of up to four devices, making it essential for warehouse, logistics, and field service operations where device rotation and scheduled fleet charging are critical to uptime. By eliminating data connectivity from the cradle design, the CRD-TC2R-BS4CG-01 reduces deployment complexity and cost — data stays on the device or syncs via Wi-Fi and Bluetooth when needed, while the cradle's sole function is reliable power delivery during end-of-shift or scheduled charging cycles.
Key Features
- Four-Slot Configuration: Charge up to four TC22R units simultaneously, allowing a typical shift rotation (morning crew returns devices, afternoon crew takes fully charged units) without idle time waiting for sequential charging.
- Charge-Only Design: Removes data-sync complexity — no cables, no Ethernet dependencies, no docking-station software overhead. Each device maintains its own connectivity independent of the cradle.
- Optimized for TC22R Fleet: Mechanical alignment and electrical contacts engineered specifically for Zebra TC22R rugged mobile computers, ensuring reliable contact and proper charge initiation cycle after cycle.
- Cost-Effective Power Management: Consolidates fleet charging into a single deployment point, reducing the need for multiple individual chargers scattered across the warehouse or depot.
- Warehouse-Ready Form Factor: Compact footprint suitable for dock charging stations, warehouse offices, or field-service vehicle depots — places devices in a known, organized state between shifts.
Integration & Compatibility
The CRD-TC2R-BS4CG-01 is compatible exclusively with Zebra TC22R mobile computers. Because this is a charge-only cradle, there is no data-port negotiation, VMS integration, or network configuration required — plug the power adapter into AC mains, insert TC22R units into the four slots, and charging begins automatically. This straightforward approach eliminates troubleshooting delays common in data-enabled docking stations and is ideal for environments where IT support is limited or devices rotate through multiple locations.
When to Choose a Different Configuration
If your workflow requires simultaneous data syncing (uploading logs, configuration pushes, or centralized device management via the cradle itself), consider a Zebra multi-slot cradle with integrated data connectivity. If you operate a single TC22R or two devices and can tolerate slower sequential charging, a single-slot charger may reduce footprint and cost. If you need to charge different Zebra mobile computer models in the same cradle, verify model compatibility — the CRD-TC2R-BS4CG-01 is engineered for TC22R only.
Frequently Asked Questions
Q: Is the CRD-TC2R-BS4CG-01 compatible with TC21 or other Zebra mobile computers?
A: No. The CRD-TC2R-BS4CG-01 is engineered exclusively for Zebra TC22R devices. Mechanical and electrical specifications do not support other models.
Q: Does the cradle require any software installation or configuration?
A: No. As a charge-only cradle, there is no software, drivers, or network setup required. Connect the power adapter and insert TC22R units.
Q: Can I use the CRD-TC2R-BS4CG-01 to sync data or push device configurations?
A: No. This is a charge-only cradle. Data synchronization and device management must occur via the TC22R's built-in Wi-Fi or Bluetooth connectivity, or through a separate data-enabled cradle if required.
Q: What is the power source for the cradle?
A: The cradle connects to a power adapter (included or separately specified by Zebra) and draws AC mains power. Consult the datasheet or contact the manufacturer for power specifications.
Q: How many TC22R devices can charge simultaneously in the CRD-TC2R-BS4CG-01?
A: Four devices can charge simultaneously — one in each of the four charging slots.
Q: Is the CRD-TC2R-BS4CG-01 suitable for outdoor or harsh environments?
A: This cradle is designed for indoor use in warehouses, depots, and offices. Consult the datasheet for environmental ratings and operating-temperature specifications if deployment near temperature extremes or moisture is planned.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The CRD-TC2R-BS4CG-01 is a no-nonsense four-slot charging dock for TC22R mobile computers. If your warehouse or logistics operation cycles devices through shifts and you don't need to push configs or sync logs via the cradle itself, this is your answer. The charge-only approach is a deliberate tradeoff: you lose data-port capability, but you gain simplicity, lower cost, and zero software overhead.
Technical Highlights:
- Four simultaneous charging slots: Accommodates a typical shift rotation without idle time. One crew returns four devices, next crew grabs four fully charged units from the same cradle.
- Charge-only design eliminates data-port complexity: No Ethernet negotiation, no docking-station app, no support calls about connection drops. Devices sync over Wi-Fi and Bluetooth independently.
- TC22R-specific form factor and contacts: Mechanical alignment is tuned for TC22R dimensions. Don't attempt to force incompatible models — it will damage contacts and void the cradle.
Deployment Considerations:
- Data sync must happen separately: If you rely on the cradle to push device firmware updates or pull fleet logs, you need a data-enabled cradle instead. The CRD-TC2R-BS4CG-01 charges only.
- Power adapter specifications: Confirm AC mains availability and amperage at your charging station. Multi-slot cradles typically draw more than single-unit chargers — verify your facility's outlet capacity before installation.
- Placement: Keep the cradle in a temperature-controlled warehouse or office environment. Extended exposure to outdoor heat or moisture is not recommended for this accessory line.
The CRD-TC2R-BS4CG-01 is the right pick for fleet operations that prioritize simplicity, cost control, and fast device rotation without centralized data management. Install it at your dock or vehicle depot, and it will quietly handle shift-change charging for years.
