Zebra CRD-ET4X-4S10I1-01 4-Slot Charge Cradle
Overview
The Zebra CRD-ET4X-4S10I1-01 is a charge-only cradle engineered for simultaneous charging of four Zebra ET4X 10" tablets. Designed for warehouse, logistics, and field service environments where device turnover is rapid and stationary charging infrastructure is critical, this cradle consolidates fleet power management at shift change, end-of-day reconciliation, or dock-based device rotation points. The charge-only configuration eliminates communication overhead and complexity — you're paying for a reliable power connector, not a full data dock — which translates to lower cost and faster device cycling during high-throughput operations.
Key Features
- 4-slot simultaneous charging: Power up an entire tablet shift team at once. Relevant when managing fleets of 8–12 devices across two or three shifts — you stage half the fleet while the other half is in use, then swap.
- ET4X 10" tablet compatibility: Purpose-built form factor for the ET4X form factor. Do not use with smaller ET2X models or larger ET8X units — physical fit and charging pins are model-specific.
- Charge-only design: No data transfer, no docking software, no serial negotiation. Your device simply seats, power flows, charging LED indicates status. Faster deployment and fewer integration variables in a warehouse environment.
- Compact stationary footprint: Sized for back-office workbenches, vehicle-mounted charging stations, or warehouse dock staging areas. Exact dimensions and weight available in the datasheet — verify desk or mounting surface load rating if stacking or wall-mounting is planned.
- Shift-based fleet management: Ideal for operations where tablets rotate on 8- or 12-hour shifts. Set one cradle per shift station; tablets charge while not in active use, eliminating mid-shift battery swaps and dead-device downtime.
- Vehicle and mobile platform integration: Can be integrated into vehicle charging docks or mobile workstations where stationary power is available. Ensures tablets are fully charged at start of route or delivery round.
Integration & Compatibility
The CRD-ET4X-4S10I1-01 is compatible exclusively with Zebra ET4X 10" tablets. It integrates into any environment with standard AC power or vehicle 12/24VDC available (verify power source on the device datasheet). No software or firmware required — plug, charge, and rotate devices. Works alongside mobile device management (MDM) solutions and enterprise fleet tracking systems; it provides no direct integration, but does not conflict with common platforms like MobileIron, BlackBerry UEM, or Zebra's own Zebra Workstation Connect (ZWC) or Zebra Launcher.
Deployment Considerations
Verify total charging current draw against available power supply capacity if charging all four tablets simultaneously from a single power outlet. Check local power specifications in the product datasheet to confirm compatibility with your facility's electrical infrastructure. If tablets must be powered and in active use during charging — rather than charged while idle — consider a data-enabled docking solution or secondary power infrastructure to avoid device rotation delays.
When to Choose a Different Model
If you require data synchronization, application loading, or provisioning during charging, a Zebra data dock or universal multi-device charging station with serial communication may be required. Consult Zebra product guides or your systems engineer to confirm requirements before committing to a charge-only solution.
Frequently Asked Questions
Q: Is the CRD-ET4X-4S10I1-01 compatible with ET2X or ET8X tablets?
A: No. The CRD-ET4X-4S10I1-01 is engineered specifically for ET4X 10" tablets. Physical form factor and charging pin arrangement are model-specific. Use only with ET4X devices.
Q: Can I use the cradle with external power banks or non-standard power supplies?
A: The cradle is designed to work with standard AC mains or vehicle power (12/24VDC). Consult the datasheet for exact power input specifications and confirm compatibility with any third-party power source before deployment.
Q: How long does a full charge cycle take on all four tablets?
A: Charge time depends on tablet battery capacity and power supply current. Refer to the ET4X tablet specifications and the CRD-ET4X-4S10I1-01 datasheet for typical charge durations under standard current draw.
Q: Does the cradle support data transfer or device provisioning?
A: No. The CRD-ET4X-4S10I1-01 is charge-only. If you require data sync, firmware updates, or app provisioning during charging, contact your systems integrator or Zebra to discuss alternative docking solutions.
Q: Can the cradle be mounted on a wall or vehicle dashboard?
A: The cradle is designed as a stationary tabletop unit. Wall or vehicle mounting requires custom brackets or mounts. Verify weight and load requirements in the datasheet before fabricating or installing custom mounts. Do not exceed the device's rated load capacity.
Q: What warranty applies to the CRD-ET4X-4S10I1-01?
A: Warranty terms vary by distributor and region. Request specific warranty details from your authorized Zebra distributor or reseller at time of purchase.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
I work with warehouse operations teams constantly, and the CRD-ET4X-4S10I1-01 is a straightforward infrastructure choice. You're buying a four-slot charge cradle — nothing fancy, no software surprises. It's built for the ET4X 10" tablet form factor and does one job: consolidate DC power delivery to your active device fleet. If your deployment includes tablets in regular rotation (shift-based, route-based, or dock-based cycling), this cradle eliminates the friction of managing individual chargers or wrestling with inadequate power outlets.
Technical Highlights:
- 4-slot simultaneous charging: Power to four tablets at once means a full shift team can charge in parallel during break windows or end-of-shift handoff. Real scenario: 12-tablet warehouse fleet, three shifts — stage one cradle per shift location, tablets are ready when operators arrive.
- Charge-only simplicity: No data transfer overhead. No docking negotiation, no provisioning delays. Tablet seats, power flows, charging indicator lights up. Deploy it Friday afternoon, it works Monday morning without intervention.
- ET4X-specific form factor: Purpose-built connector and seating geometry mean no compatibility drift. You don't accidentally dock an ET2X or ET8X and fry a port. Model specificity is a safety feature in production environments.
Deployment Considerations:
- Power supply capacity matters: Confirm your facility AC circuit or vehicle power system can handle simultaneous four-tablet charging draw. Check datasheet power specs and verify outlet capacity before installation to avoid breaker nuisance trips or insufficient charge current.
- No data synchronization: If your workflow requires tablets to sync, receive app updates, or push logs during charging, this cradle is insufficient. You'd need a data-enabled dock or secondary connectivity solution. Plan this early in your mobile device strategy.
- Stationary footprint assumption: The CRD-ET4X-4S10I1-01 is a desktop/dock unit. If you need wall-mounted or vehicle-integrated charging, verify mounting hardware availability and structural load capacity before custom fabrication.
This is a fit for shift-intensive warehouse and logistics operations where tablets cycle through charging stations at predictable intervals — end-of-shift docking points, delivery hub staging areas, or vehicle prep stations. If your deployment leans toward ad-hoc charging or you need to provision devices during the charge cycle, escalate to your Zebra systems engineer for a data dock or alternative strategy.
