Wasp 633809002823 Wasp Unifi POE Adapter with Gigabit Port

Wasp 633809002823 Unifi PoE Adapter with Gigabit Port

Overview

The Wasp 633809002823 is a PoE adapter designed to inject power and data into Ubiquiti Unifi devices using a single Ethernet run. It maintains Gigabit-speed throughput while delivering power via standard PoE, eliminating the need for dedicated AC power at the endpoint. This is the right tool when you're mounting a Unifi access point, camera, or controller in spaces where running AC power is impractical—exposed ceilings, cable trays, outdoor structures, or retrofit installations where conduit is already congested.

Compatibility

This adapter integrates with the Ubiquiti Unifi product ecosystem. Before deployment, confirm compatibility with your specific Unifi device model and verify its power class requirements. Not all Unifi hardware requires an external PoE adapter; some models ship with integrated PoE support built in. Pairing this adapter with a device that already has integrated PoE can create redundancy or conflict. Cross-reference your device's power budget (watts) against the PoE class your switch or injector can supply—undersized power delivery will cause device resets or boot failures.

Installation Notes

Deploy the adapter between a PoE-capable switch port (or standalone PoE injector) and your Unifi device using standard Cat5e or Cat6 cabling. Ensure your power source meets the device's wattage demand; many modern Unifi access points and cameras draw 15–30W, so confirm your switch or injector supports the required PoE class (typically 802.3at or higher). Position the adapter close to the powered device to minimize cable runs and voltage drop—long runs between the PoE source and adapter can degrade power delivery. In outdoor or high-moisture environments, house the adapter in a weatherproof enclosure and use sealed RJ45 connectors to prevent corrosion and water ingress.

What's in the Box

• 1x Wasp 633809002823 Unifi PoE Adapter with Gigabit Port