Wasp 633808550073 PoE Power Supply for Time Clocks
Overview
The Wasp 633808550073 is a PoE power delivery unit that supplies power to Wasp barcode, magnetic stripe, and RFID time clock systems via standard Ethernet cabling. This accessory eliminates the need for separate power runs to distributed clock terminals, consolidating power and data on a single network link — a real operational advantage when you're installing clocks across a warehouse, retail floor, or multi-location facility where running individual power lines would be costly or logistically impractical. The 633808550073 integrates with standard 802.3af and 802.3at PoE infrastructure, meaning you can deploy clocks without dedicated electrical circuits at each terminal location.
Compatibility
This PoE supply is compatible with Wasp barcode clocks, magnetic stripe clocks, and RFID time clock systems. Verify your specific clock model supports PoE operation before ordering — not all Wasp clock models accept PoE delivery. The unit integrates with any standard Ethernet network infrastructure equipped with PoE, including managed and unmanaged switches that support 802.3af (15.4W) or 802.3at (30W) delivery. Before deployment, confirm your network switch has sufficient available PoE budget and port allocation to support all connected clock terminals without exceeding switch power limits. If you're deploying multiple clocks, total their power draw against your switch's PoE capacity to avoid brown-outs or port shutdowns.
Installation Notes
Deploy this PoE supply on a dedicated network segment or VLAN if clock traffic must be isolated from camera or general LAN traffic. Use shielded Cat5e or Cat6 cabling to minimize interference with nearby barcode scanners or RF equipment when RFID clocks are present. Keep cable runs under 100 meters (328 feet) per IEEE 802.3 standard to preserve voltage delivery to distant clock terminals — longer runs will degrade power delivery and may cause clock dropouts or intermittent behavior.
