Wasp 633808551452 Wasp Poe Inject & Convertr Kit & 48V Pwr

Wasp 633808551452 PoE Injector & Converter Kit

Overview

The Wasp 633808551452 is a PoE injector and converter kit paired with a 48V power supply. This combination addresses mixed power scenarios: devices that draw standard PoE (802.3af or 802.3at) but operate on 48VDC internally, or installations requiring both midspan injection and voltage conversion in the same footprint. Deploy this where your network infrastructure lacks sufficient inline PoE ports, or when legacy equipment needs 48V but your NVR or switch outputs standard 802.3 PoE.

Compatibility

Confirm compatibility with your specific camera, PTZ, door access reader, or encoder before purchase. Devices that accept 48VDC input via barrel connector, terminal block, or internal power module are candidates. If your equipment is rated for 12VDC or 24VDC only, this kit will not work — verify voltage on the device datasheet or label. The 48V output of this converter is not suitable for equipment designed for lower voltages.

Installation Notes

Position the power supply and injector near the devices they serve to minimize voltage drop over long cable runs. Ensure adequate ventilation around the 48V power unit — do not enclose it in a sealed cabinet without thermal management. Verify that your PoE sourcing device (switch port or separate injector) can provide the wattage required by the downstream device after conversion. The converter does not amplify available power; it transforms voltage and requires sufficient input current to deliver full 48V output.

What's in the Box

Specific package contents not confirmed in available evidence. Contact the vendor for an exact list of included components (injector unit, power supply, cables, connectors, mounting hardware).