Kantech

SKU: HID-C1586KSF-G

Kantech HID ISOProx II Composite Dye Sub Card - HID-C1586KSF-G

Dye-sub composite card for HID ISOProx II access control systems

• HID ISOProx II 40/60 polyester composite card
• 3-5 year lifespan vs 1-2 years for standard PVC
• Dye-sublimation printable for branded credential issuance

Kantech

SKU: HID-PIVRP40HP

Kantech HID pivCLASS RP40 Single Gang Reader - HID-PIVRP40HP

FIPS-compliant single gang reader for federal-grade access control

• pivCLASS RP40 single-gang reader for federal/PIV credential support
• MIFARE + HID + NFC + 125 kHz Prox multi-tech reader
• Compact wall-switch form factor for office and government doors

Lifesafety Power

SKU: AH2-BOXED

Lifesafety Power AH2-BOXED AC Helix module redundant AC power

• Dual independent AC inputs eliminate single-point-of-failure on AC mains.
• Accepts 110–230V AC input, supporting both North American and international feeds.
• Expands Helix series controllers with hot-failover AC redundancy for 24/7 uptime.

Lifesafety Power

SKU: ATM-3-FUSE-BOXED(BAGOF25)

Lifesafety Power Atm-3-Fuse-Boxed(BAGOF25) Fuse Atm-3 32V

• Rated 32V DC / 3A to protect access control and door strike branch circuits.
• Pack of 25 keeps spare inventory on hand for multi-site emergency replacements.
• Designed for Lifesafety Power ATM-series backup supplies and UPS enclosures.

Lifesafety Power

SKU: B100F8PE4M-WP-AWS01

Lifesafety Power B100F8PE4M-WP-AWS01 12V secondary voltage power

• Adjustable 5–18V output at up to 4A per circuit supports diverse egress device loads.
• 8 PTC-supervised outputs provide automatic overcurrent protection across all connected loads.
• E4 enclosure (24×20×6.5 in) arrives prewired with Panduit–Phoenix terminals for fast install.

Lifesafety Power

SKU: BX50-E1

Lifesafety Power BX50-E1 PoE Power Extractor Splitters 50W or 75W

• Splits one PoE source into two outputs, supporting a combined 50W load.
• Compatible with 802.3af and 802.3at PoE injectors or switch ports.
• UL294/FAI listed, confirming compliance for commercial life-safety deployments.

Lifesafety Power

SKU: CNV-16DRF-MERC-STRD

Lifesafety Power CNV-16DRF-MERC-STRD 16 Door Standard Mercury

• Powers up to 16 doors from a single 24VDC, 150W distributed supply.
• Scales across warehouses and multi-tenant buildings where centralized power is impractical.
• Integrates within the Lifesafety Power 16-door modular access control ecosystem.

Lifesafety Power

SKU: CNV-4DRP-MERC-STRD

Lifesafety Power CNV-4DRP-MERC-STRD 4 Door Standard Mercury

• Distributes 24VDC power across 4 door circuits from a single consolidated unit.
• Eliminates per-door power supplies, reducing hardware count and install complexity.
• Mercury-based regulation sustains stable output under variable multi-door load conditions.

Lifesafety Power

SKU: E12S-BACKPLATE-ONLY

Lifesafety Power E12S-Backplate-Only E12S Backplate Only

• Direct replacement backplate restores secure wall or rack mounting for E12S enclosures.
• Rated for 230VAC / 11W systems, matching original E12S power supply electrical specs.
• Supports vertical surface installation on drywall or metal frames for flexible deployment.

Lifesafety Power

SKU: E12S-BOXED

Lifesafety Power E12S-BOXED Enclosure with main backplate

• Integrated main backplate eliminates field-fabricated wiring rails, cutting install time.
• Supports DIN-rail mounted power supplies, relay modules, and auxiliary control equipment.
• Wall or rack mountable — suits equipment rooms, electrical closets, and control cabinets.

Lifesafety Power

SKU: E2-2BS1

Lifesafety Power E2-2BS1 E2 enclosure size 16W x 20H x 4.5D

• Compact 16W×20H×4.5D-inch form factor fits shallow wall cavities and utility closets.
• Two-shelf internal layout organizes battery modules for access control or surveillance loads.
• 16W capacity suits single- or two-door access systems and low-power alarm control panels.

Lifesafety Power

SKU: E2V-BOXED

Lifesafety Power E2V-BOXED E2V-Boxed

• Boxed form factor enables compact, ready-to-install deployment in tight spaces.
• 16W power rating supports low-draw security devices without oversizing the supply.
• Integrates within Lifesafety Power families alongside access and surveillance gear.

Lifesafety Power

SKU: E2X-BOXED

Lifesafety Power E2X-BOXED E2X Axis backplate 20x16x4.5

• Purpose-built Axis camera backplate standardizes rough-in wiring and alignment.
• 20×16×4.5 in. profile fits standard North American 2-gang electrical boxes.
• Operates at 120VAC, integrating with standard North American power infrastructure.

Lifesafety Power

SKU: E4-3BS1

Lifesafety Power E4-3BS1 E4 Enclosure (3) shelves

• Three internal shelves organize batteries and distribution modules in one enclosure.
• 24H × 20W × 6.5D in. form factor fits standard wall- or rack-mount deployments.
• Dedicated battery segregation improves thermal management and simplifies maintenance.

Lifesafety Power

SKU: E4A-BOXED

Lifesafety Power E4A-BOXED Enclosure E4A 24x20x6.5 black AMAG

• 24×20×6.5 in. black steel enclosure fits closets and wall cavities where racks won't.
• AMAG-compatible backplate supports DIN-rail modules and terminal blocks without adapters.
• Integrated ventilation openings prevent thermal buildup in continuous-duty deployments.

Lifesafety Power

SKU: E4H1-BOXED

Lifesafety Power E4H1-BOXED Honeywell Boxed Power Systems combine

• UL-listed enclosure combines door control power and camera distribution in one chassis.
• Supports 24VDC outputs for EM locks, REX sensors, and door strike hardware.
• Single consolidated unit reduces footprint and simplifies wiring at access control convergence points.