Middle Atlantic WALL SPRT HDW 15in. 18in. 24in. - CLH-WRS-W18-W24

Middle Atlantic CLH-WRS-W18-W24 Cable Ladder Wall Stand-Off Hardware

Overview

The Middle Atlantic CLH-WRS-W18-W24 is a wall stand-off support bracket designed for use with Middle Atlantic cable ladder systems. At 24 inches wide and just 2 inches in both depth and height, this low-profile hardware piece keeps structured cable runs organized and properly spaced away from wall surfaces — a practical requirement in AV equipment rooms, server closets, and security head-end installations where clean cable routing affects both serviceability and airflow. The CLH-WRS-W18-W24 ships as a single unit and is compatible with 15-inch, 18-inch, and 24-inch cable ladder widths, giving you flexibility across multi-run installations without stocking separate SKUs for each ladder width.

For integrators building out Middle Atlantic cable management infrastructure, this stand-off bracket is the hardware that anchors wall-mounted cable ladder runs at consistent intervals — maintaining horizontal levelness and preventing cable ladder sag over long horizontal spans. Proper stand-off spacing is a code and best-practice consideration in commercial installations.

Key Features

• Tri-Width Compatibility (15", 18", 24"): One SKU supports three cable ladder widths, reducing the number of part numbers you need to manage on a structured cabling job and simplifying reorder when ladder width varies by run.
• Compact 2" × 2" Profile: The 2-inch depth and 2-inch height keep wall penetration minimal — useful in tight chase walls and finished spaces where stand-off bulk would interfere with adjacent conduit or architectural elements.
• 24-Inch Span: The 24-inch width matches the widest supported ladder size, providing full-width bearing support across the cable ladder — critical for heavy multi-cable bundles that would otherwise flex or stress ladder side rails at unsupported spans.
• Factory-New Commercial Hardware: Sourced factory-new through the Middle Atlantic supply chain — genuine hardware, no field-fabricated substitutes that introduce dimensional inconsistency into an otherwise uniform ladder system.

Integration & Compatibility

The CLH-WRS-W18-W24 (often searched as CLH WRS W18 W24) is part of Middle Atlantic's CLH cable ladder ecosystem. Verify ladder series and mounting surface compatibility — masonry, metal stud, and wood stud installations each require appropriate anchor hardware not included with this stand-off. Pair with the correct Middle Atlantic cable ladder accessories and fasteners for your wall substrate. For complete AV and security rack and pathway planning, Middle Atlantic's system documentation specifies maximum stand-off spacing by cable load.

Frequently Asked Questions

Q: What cable ladder widths does the CLH-WRS-W18-W24 support?

A: The CLH-WRS-W18-W24 supports 15-inch, 18-inch, and 24-inch wide cable ladders, making it a single-SKU solution across multiple ladder width configurations in the same installation.

Q: What are the physical dimensions of the CLH-WRS-W18-W24?

A: The stand-off measures 24 inches wide, 2 inches in height, and 2 inches in depth. Shipping weight is 9.7 lbs (4.4 kg).

Q: How many units are included per package?

A: One unit is included per package (Package Count: 1).

Q: What wall substrate anchoring hardware is included with the CLH-WRS-W18-W24?

A: Substrate-specific anchoring hardware (masonry anchors, toggle bolts, wood screws, etc.) is not included. Select fasteners appropriate for your specific wall construction.

Q: Is this stand-off bracket compatible with other cable ladder brands?

A: The CLH-WRS-W18-W24 is a Middle Atlantic component designed for the CLH cable ladder system. Compatibility with third-party cable ladder products is not verified from available evidence — consult Middle Atlantic system documentation for cross-compatibility guidance.

Jerry Tildsen

The CLH-WRS-W18-W24 is a detail that separates a professional cable ladder install from one that sags or shifts over time. The 2-inch stand-off depth keeps the ladder clear of the wall surface while the 24-inch width provides full bearing support across the widest supported ladder — and that tri-width compatibility (15", 18", 24") is a real procurement convenience on jobs where your ladder width varies by zone.

Technical Highlights:

• 2" Stand-Off Depth: Keeps cable ladder runs clear of wall surfaces — important for airflow beneath cable bundles and for maintaining bend radius on fiber runs that hug the wall side of the ladder.
• 24" Width Coverage: Full-width bearing at the widest supported ladder size means no unsupported overhang — a load distribution concern once you're running dense copper bundles across long horizontal spans.
• Tri-Width SKU (15"/18"/24"): One part number covers three ladder widths — useful when a single head-end room uses mixed ladder widths for different cable types and you want to consolidate your hardware BOM.

Deployment Considerations:

• Anchor hardware is not included — spec your fasteners for the wall substrate (metal stud, concrete, CMU) before pulling this into a project BOM, or you'll be making a separate hardware run on install day.
• At 9.7 lbs shipping weight for a single 2"×2"×24" bracket, verify your freight class and packaging expectations for multi-unit orders — this is denser than it looks and palletizes accordingly on larger pathway jobs.

Best fit for commercial AV and security head-end buildouts using the Middle Atlantic CLH cable ladder system, where consistent stand-off spacing across a full wall run is a project specification requirement rather than an afterthought.