Middle Atlantic Ladder Wall Support BKT 12IN W 6 Pc. - CLH-WRS-6

Middle Atlantic CLH-WRS-6 Cable Ladder Wall Support Bracket

The Middle Atlantic CLH-WRS-6 is a wall support bracket designed for cable ladder systems, sold in a six-piece pack. At 14 in wide and just 2 in deep, it provides a compact attachment point that anchors horizontal cable ladder runs to vertical wall surfaces — keeping structured cabling in security, AV, and IT infrastructure installations organized, supported, and off the floor. If you are routing cable ladders through equipment rooms, server closets, or along corridor walls, the CLH-WRS-6 gives you the hardware to do it right in a single order quantity.

Overview

Middle Atlantic's cable management line addresses the real-world problem of unsupported ladder runs sagging between rack columns or losing alignment over long horizontal runs. The CLH-WRS-6 wall support bracket is the mechanical anchor in that system. Each bracket is low-profile — 2 in deep and 2 in tall — which means it does not project far from the wall surface and will not create clearance conflicts with adjacent conduit, panels, or cable trays. The 14 in width matches the bracket to a 12 in wide cable ladder, accounting for the ladder's rail flanges on either side.

Key Features

• 14 in overall width for 12 in ladder compatibility: The bracket's 14 in width spans the full outer dimension of a standard 12 in wide cable ladder, providing full-width support without shimming or modification. If your ladder run is a different width, verify before ordering — this bracket is sized for the 12 in ladder series.
• Low 2 in depth profile: At only 2 in of wall projection, the CLH-WRS-6 keeps the cable ladder close to the wall surface. This matters in tight equipment rooms and corridors where every inch of clearance affects door swing, rack access, and conduit routing.
• Six-piece pack (CLH-WRS-6 includes 6 brackets): Sold as a set of six, which covers multiple support points along a single ladder run. Industry practice for horizontal ladder runs generally calls for wall support every 4 to 6 feet depending on cable fill weight — six brackets gives you 24 to 36 linear feet of supported run in a single order, reducing reorder trips on active job sites.
• 23 lb shipping weight for the six-piece set: The shipping weight of 23 lbs across six units indicates a heavy-gauge bracket construction — roughly 3.8 lbs per bracket before packaging material. This is consistent with commercial-grade steel fabrication rather than light-duty stamped hardware, which matters when the ladder is carrying bundled security, power, and data cabling simultaneously.
• Middle Atlantic cable ladder ecosystem fit: Designed as a component within Middle Atlantic's cable ladder product family, the CLH-WRS-6 integrates with the CLH series ladder hardware. Mixing ladder support hardware across manufacturers risks mismatched rail widths and fastener patterns — sticking within the same product family avoids field modification.
• Compact 2 in height: The 2 in bracket height keeps the mounting footprint small on the wall, which is useful when mounting surfaces have limited usable space between conduit knockouts, stud spacing, or fire-stop penetrations.

Integration and Compatibility

The CLH-WRS-6 is part of Middle Atlantic's cable ladder wall support system and is sized for 12 in wide cable ladders in the CLH series. It is appropriate for rack room and equipment closet installations where cable ladders transition from vertical rack columns to horizontal wall runs. Confirm ladder width and wall material (concrete anchor vs. wood stud vs. metal stud) before specifying fastener hardware — the bracket itself does not include wall fasteners, so anchor selection is a field decision based on substrate.

What's in the Box

• 6x CLH-WRS-6 Cable Ladder Wall Support Brackets

Frequently Asked Questions

Q: How many brackets are included in the CLH-WRS-6 package?

A: The CLH-WRS-6 ships as a six-piece pack. You receive six individual wall support brackets per order.

Q: What cable ladder width is the CLH-WRS-6 designed for?

A: The bracket is 14 in wide overall and is designed to support a 12 in wide cable ladder — the additional width accounts for the outer rail flanges of the ladder.

Q: What are the bracket dimensions?

A: Each bracket measures 14 in wide x 2 in high x 2 in deep. The low profile keeps the ladder close to the wall surface.

Q: Does the CLH-WRS-6 include wall fasteners or mounting hardware?

A: Based on available product data, wall fasteners are not listed as included. Anchor selection depends on your wall substrate (concrete, wood stud, metal stud) and should be specified based on the expected cable load.

Q: Is the CLH-WRS-6 compatible with other brands of cable ladder?

A: The bracket is designed as part of Middle Atlantic's CLH cable ladder system. Compatibility with other manufacturers' ladders depends on rail width and fastener pattern matching — verify dimensions against your specific ladder before ordering.

James Everett

The CLH-WRS-6 is straightforward hardware, but the spec that matters most on a busy job site is the six-piece pack quantity — you get six brackets in one order, which is enough to support a 24 to 36 linear foot horizontal ladder run at standard spacing intervals without splitting the order across multiple line items.

Technical Highlights:

• 14 in bracket width: Sized for 12 in wide cable ladders, spanning the full outer rail dimension without shimming — critical for a flush, stable fit in the CLH series system.
• 2 in depth x 2 in height profile: Minimal wall projection and mounting footprint. In equipment rooms with limited wall real estate between conduit runs and panel knockouts, this low profile prevents clearance conflicts that a bulkier bracket would create.
• 23 lb shipping weight across 6 units: Approximately 3.8 lbs per bracket before packaging — consistent with heavy-gauge steel construction suited for cable fills that include bundled security, power, and structured data cabling running simultaneously.

Deployment Considerations:

• Wall fasteners are not included with the CLH-WRS-6 — you need to specify anchors based on wall substrate before the job starts. Concrete slab, metal stud, and wood stud each require different anchor hardware and torque specs; leaving this to field improvisation on day-of creates schedule risk.
• The bracket is sized specifically for 12 in wide ladders in Middle Atlantic's CLH family. If your ladder run uses a different width (6 in, 9 in, or 18 in), this bracket will not align correctly — verify your ladder model before placing the order.

For security integrators building out a structured equipment room with camera, access control, and NVR cabling routed on cable ladders, the CLH-WRS-6 is the right support hardware when your horizontal ladder runs are 12 in wide and the wall is the primary anchor point — specify fasteners for your substrate alongside it.