Middle Atlantic Ladder Wall Support BKT 6IN AND 12IN W - CLH-WRS-W6-W12

Middle Atlantic CLH-WRS-W6-W12 Cable Ladder Wall Support Bracket

Overview

The Middle Atlantic CLH-WRS-W6-W12 is a 12-inch cable ladder wall support bracket designed to anchor and stabilize open-style cable ladder runs along walls in structured AV, IT, and security infrastructure installations. At 12 inches wide (30.5 cm) with a 2-inch height and 2-inch depth profile (both 5.1 cm), this bracket keeps cable ladders firmly positioned against the wall without consuming meaningful rack or ceiling real estate. If you are routing power, signal, or low-voltage cabling through a server room, head-end closet, or data center environment and need a reliable wall-mount anchor point for your cable ladder segments, the CLH-WRS-W6-W12 is the purpose-built solution in the Middle Atlantic cable management line.

Cable ladders are a preferred routing method for high-density cabling environments — they provide airflow, easy access for moves-adds-changes, and visual cable traceability. But unsupported ladder spans flex, sag, and shift over time, especially in high-traffic service areas. A properly spaced wall support bracket eliminates that flex, keeps your ladder level, and protects cable bend radius across the full run. This bracket ships as a single-piece unit and is sold individually (Package Count: 1), so you can order exactly the quantity your run requires without unnecessary surplus.

Key Features

• 12-Inch (30.5 cm) Working Width: Matches wide cable ladder configurations, giving enough span to support high-density multi-cable runs without forcing a narrower ladder that would require multiple parallel trays side by side.
• Compact 2" × 2" Bracket Profile: The 2-inch height and 2-inch depth (5.1 cm each) keep the support footprint minimal — important when clearances are tight above conduit, near ceiling penetrations, or around existing wall-mounted equipment.
• Purpose-Built Cable Ladder Component Type: Engineered specifically for the Middle Atlantic cable ladder system, ensuring proper geometry, load compatibility, and a consistent finished appearance throughout the installation rather than field-fabricated workarounds.
• Single-Unit Packaging: Sold as individual units (Package Qty: 1), which is practical for projects where support spacing varies — you buy what the run calls for, not a fixed multi-pack that leaves you short or long on a given job.
• Wall-Mount Architecture: Designed to attach to wall surfaces and provide a lateral support point for the cable ladder, maintaining horizontal alignment and preventing lateral drift over the life of the installation.
• Commercial-Grade Construction: Consistent with the Middle Atlantic product line, the bracket is built for permanent commercial and enterprise installations — appropriate for security operations centers, broadcast head-ends, AV integration racks, and structured cabling closets.

Integration & Compatibility

The CLH-WRS-W6-W12 is designed as part of the Middle Atlantic CLH cable ladder series. When planning a cable ladder run, wall support brackets should be positioned at regular intervals — typically every 4 to 6 feet along a wall-mounted run — to maintain structural integrity and prevent cable sag. This bracket supports 12-inch-wide ladder configurations; if your installation uses a narrower or wider ladder width, verify the matching bracket SKU within the CLH wall support family before ordering.

For end-to-end cable pathway planning in security and AV infrastructure, pair ladder wall supports with appropriate cable management accessories including end caps, splice plates, and drop-out fittings to complete the run cleanly. When routing between overhead ladder runs and rack equipment below, consider compatible vertical cable managers from the same Middle Atlantic line to maintain a consistent, serviceable pathway architecture.

What's in the Box

• 1× Middle Atlantic CLH-WRS-W6-W12 Cable Ladder Wall Support Bracket

Frequently Asked Questions

Q: What cable ladder width does the CLH-WRS-W6-W12 support?

A: The CLH-WRS-W6-W12 is a 12-inch (30.5 cm) wide wall support bracket, designed to support 12-inch cable ladder configurations in the Middle Atlantic CLH cable ladder system.

Q: How many brackets are included in one package?

A: One bracket is included per package (Package Count: 1). Order the quantity needed to match your required support spacing along the cable ladder run.

Q: What are the physical dimensions of the CLH-WRS-W6-W12 bracket?

A: The bracket measures 12 inches (30.5 cm) wide, 2 inches (5.1 cm) tall, and 2 inches (5.1 cm) deep — a compact profile designed to anchor the ladder to a wall surface without protruding significantly from the wall plane.

Q: Is this bracket compatible with cable ladders from other manufacturers?

A: The CLH-WRS-W6-W12 is engineered as part of the Middle Atlantic CLH cable ladder system. Compatibility with third-party cable ladder products is not specified in the manufacturer documentation — confirm dimensions and mounting geometry before mixing ladder systems.

Q: How is the CLH-WRS-W6-W12 different from the 6-inch variant?

A: The CLH-WRS-W6-W12 supports 12-inch wide cable ladders. The product name references both 6-inch and 12-inch widths (W6 and W12), indicating this SKU covers the 12-inch wall support bracket configuration. Verify the SKU against your specific ladder width before ordering.

James Everett

The CLH-WRS-W6-W12 is a detail-level component that determines whether your cable ladder run stays clean and serviceable five years after commissioning or starts sagging and shifting after the first few moves-adds-changes. At 12 inches wide with a 2-inch-by-2-inch bracket footprint, it is specifically proportioned for high-density ladder runs where you need a genuine wall anchor, not a field-fabricated bracket that introduces inconsistency into an otherwise engineered cable pathway.

Technical Highlights:

• 12-Inch (30.5 cm) Width: Correct match for 12-inch cable ladder configurations — using an undersized bracket on a wide ladder shifts stress to the ladder rails themselves and creates a failure point at the support location over time.
• 2" × 2" Profile (5.1 cm each dimension): Minimal wall protrusion matters in tight head-end closets and security operations centers where conduit, cable trays, and wall-mounted panels compete for the same linear footage of wall space.
• Single-Unit Packaging: Sold individually rather than in fixed multi-packs, so support bracket quantity maps directly to your run length and spacing design — no over-ordering on a job that only needs three intermediate supports.

Deployment Considerations:

• Plan bracket spacing before ordering quantity — standard practice in structured cabling is 4-to-6-foot intervals along a wall-mounted ladder run; a 20-foot run typically requires 4 to 6 of these brackets plus end anchors.
• The CLH-WRS-W6-W12 product name encodes both W6 and W12 width references — confirm you are ordering the correct width variant that matches your installed ladder width before placing the order, as mixing bracket widths on a single run creates geometry inconsistencies at each support point.

This bracket is the right call for security operations center head-ends, broadcast facilities, and enterprise IT closets where cable ladder runs need to stay aligned and accessible across years of active service — environments where field-fabricated supports are not acceptable and a pulled cable should never mean a shifted ladder.