Viking Electronics 263512 VE 5x5 Panel Kit with Panel Gasket and Screws
Overview
The Viking Electronics 263512 is a hardware mounting kit — panel, gasket, and screws — designed for flush-mount installations of Viking 5″ x 5″ entry phone and intercom panels. If you're rough-in mounting a Viking E-10-IP VoIP door entry phone or similar 5×5 footprint device into a wall or door frame, this kit provides the sealing gasket and fastener set that keeps the installation weathertight and mechanically secure. It eliminates the need to source hardware separately at the job site.
Compatibility
Sized for Viking 5″ x 5″ panel-format products — confirmed fit for the Viking Electronics E-10-IP VoIP Door Entry Phone, which shares the same 5″ x 5″ x 2.25″ (127mm x 127mm x 57.2mm) panel footprint. Verify panel dimensions before ordering with other Viking intercom and entry phone models — the 5×5 footprint is specific to that panel family. Not compatible with the PA-2A paging amplifier (5.25″ x 3.5″ form factor) or other non-5×5 Viking products.
Installation Notes
The included panel gasket provides environmental sealing at the panel-to-surface interface — critical for exterior door installations exposed to wind-driven rain or dust ingress. Install the gasket between the panel back and the mounting surface before fastening. Use the included screws to avoid thread-pitch mismatches with the panel's mounting holes. No special tools required beyond a standard screwdriver.
What's in the Box
- 1x 5″ x 5″ panel
- 1x panel gasket
- 1x screw set
