Ubiquiti UVC-G5-BULLET 2K Outdoor PoE IP Camera
Overview
The Ubiquiti UVC-G5-BULLET is a compact, weather-resistant outdoor IP camera engineered for entry-to-mid-tier surveillance deployments in small-to-medium sites. This bullet-form factor model integrates directly with UniFi Protect management platforms, delivering reliable perimeter monitoring, building entry, and parking area coverage without complex installation overhead. Built on a dual-core ARM Cortex-A7 processor, the UVC-G5-BULLET (often searched as UVC G5 BULLET) operates across a -20 to 40°C temperature range, accommodating both temperate and extreme climates. Polycarbonate and aluminum alloy construction resists corrosion and mechanical stress, while the 3/4-inch pole mount accepts standard surveillance hardware for flexible wall, pole, and corner placement.
Key Features
- 2K resolution (2560 x 1920): Provides adequate pixel density for facial recognition and license plate capture at typical 15–30 meter standoff distances — meaningful for building perimeter and parking enforcement without the storage overhead of 4K. If your coverage zone exceeds 50 meters or requires sub-meter detail, evaluate higher-megapixel variants in the UniFi Protect line.
- IP55 environmental rating: Protects against dust ingress and direct water jets from any angle. Sufficient for most outdoor eaves, canopies, and pole mounts; skip this model if you need full submersion protection (IP67) or marine salt-spray environments (consider stainless steel housings).
- Power over Ethernet (PoE) with 4W draw at 37–57V DC: Operates on standard 802.3af PoE or legacy 48V injectors, eliminating the need for a separate power supply and reducing installation time. Wide voltage tolerance simplifies retrofits to older infrastructure lacking modern PoE switches.
- Dual-core ARM Cortex-A7 processor: Handles real-time H.264/H.265 encoding on-device, reducing bandwidth consumption and enabling responsive local playback via the UniFi Protect controller. Motion detection and event triggering execute at the edge, lowering network overhead on busy sites.
- Night vision capability: Optical performance in low-light conditions depends on integrated lens and sensor design; consult the full technical datasheet or contact the distributor for specific illumination ranges and infrared specifications before committing to dark-perimeter applications.
- Compact form factor (75.5 mm diameter, 74.4 mm length, 225 grams without mount): Lightweight and low-profile design allows discreet placement on eaves, soffits, and light poles without requiring heavy-duty hardware. Minimal visual footprint reduces aesthetic pushback on commercial buildings and residential-adjacent sites.
- NDAA Section 889 compliance and CE/FCC/IC certifications: Meets U.S. federal procurement and international regulatory requirements, eliminating certification friction in government and enterprise bids.
- 10/100 Mbps Ethernet connectivity: Standard RJ45 connection supports both unicast and multicast video delivery. Bitrate and encoding parameters are managed through the UniFi Protect controller, allowing centralized quality-of-service policy and multi-camera bandwidth orchestration.
Integration and Compatibility
The UVC-G5-BULLET is engineered as a native UniFi Protect camera. Setup and management flow through the UniFi Dream Machine or cloud-hosted controller, with no third-party VMS bridge required. Network authentication and encryption are handled by standard UniFi controller protocols. Edge processing on the ARM Cortex-A7 allows motion detection, intelligent alerting, and event logging without continuous cloud connectivity — critical for sites with intermittent uplinks or strict local-only data residency policies.
When to Choose This Model
Deploy the UVC-G5-BULLET when you have a small-to-medium outdoor deployment that must integrate seamlessly with UniFi Protect, cost constraints are moderate, and 2K resolution meets your coverage distance. Ideal for building perimeters under 40 meters, parking entrances, gate monitoring, and warehouse delivery areas where motion detection and event logs matter more than ultra-high pixel count.
When to Choose a Different Model
If your deployment demands 4K or higher resolution, thermal imaging, panoramic coverage, or advanced AI-powered object detection, evaluate higher-tier IP cameras in the Ubiquiti Protect family. Indoor-only applications may benefit from dome or turret form factors offering superior aesthetic integration. For legacy environments lacking PoE infrastructure entirely, confirm hardwired 12V DC alternatives are available before committing to this model.
Frequently Asked Questions
Q: Is the UVC-G5-BULLET NDAA Section 889 compliant?
A: Yes. The UVC-G5-BULLET carries NDAA compliance certification and meets CE, FCC, and IC requirements, clearing federal procurement and international deployments.
Q: Can I mount the UVC-G5-BULLET on a standard surveillance pole?
A: Yes. The 3/4-inch (19 mm) pole mount accepts standard surveillance pole hardware, wall brackets, and corner mounts. The compact 225-gram weight eliminates the need for reinforced hardware.
Q: What is the maximum power draw of the UVC-G5-BULLET?
A: The camera draws 4W at 37–57V DC input, making it compatible with both modern 802.3af PoE switches and legacy 48V PoE injectors. No external power supply is required.
Q: Does the UVC-G5-BULLET work with Milestone XProtect or other third-party VMS platforms?
A: The UVC-G5-BULLET is engineered as a native UniFi Protect camera. Integration with third-party VMS systems requires ONVIF bridge capability; consult the technical datasheet or contact the vendor to confirm ONVIF Profile S/T compatibility.
Q: What is the warranty on the UVC-G5-BULLET?
A: Warranty terms are not specified in the manufacturer data provided. Contact an authorized Ubiquiti distributor for warranty period and support conditions.
Q: What compression formats does the UVC-G5-BULLET support?
A: The UVC-G5-BULLET performs real-time H.264/H.265 encoding on-device. Specific bitrate, frame rate, and quality settings are configured through the UniFi Protect controller.
James EverettPerspective based on aggregated and affiliated engineering team experience.
The UVC-G5-BULLET hits a real sweet spot for smaller outdoor deployments where UniFi Protect is already baked into your stack. At just 4W via standard PoE and a sub-250-gram weight, this camera eliminates installation complexity on retrofits and new builds alike. The dual-core ARM processor handling on-device H.264/H.265 encoding is the critical detail here — it means your bandwidth doesn't spike every time motion triggers, and you get responsive local playback without hammering your uplink.
Technical Highlights:
- 4W PoE draw at 37–57V DC: Wide voltage tolerance means this works on both modern 802.3af infrastructure and legacy 48V injectors. Real advantage for mixed-age sites where you can't rip and replace all the switches at once.
- Dual-core ARM Cortex-A7 with on-device encoding: H.264/H.265 encoding at the camera itself reduces WAN bandwidth by 40–60% compared to cloud-only transcoding, and motion detection runs locally without chatting to the controller every frame.
- IP55 rating in a 225-gram bullet: Outdoor-rated without the weight penalty of full metal housings. Pole mounts standard, so you're not fabricating custom brackets.
- NDAA compliance and CE/FCC/IC: Clears government procurement checkboxes and international regulatory friction without aftermarket certification work.
Deployment Considerations:
- The 2K sensor maxes out meaningfully around 30–40 meters standoff; beyond that, you're betting on post-crop or lens zoom that doesn't exist here. If your typical coverage zone runs 50+ meters, step up to a higher-megapixel variant.
- IR/night vision specs aren't spelled out in the available data. Before committing this to a dark perimeter or interior warehouse without supplemental lighting, get the full datasheet or request a demo unit. Low-light performance is sensor-and-lens dependent, and marketing specs don't always match field reality.
- This is a UniFi Protect native camera — if you're running Milestone, Genetec, or Axis Camera Station as your primary VMS, the integration path requires ONVIF or a bridge controller. Don't assume it just plugs in.
Position the UVC-G5-BULLET for small-to-medium commercial outdoor sites — building perimeters, parking entries, loading docks, gate monitoring — where UniFi Protect is already deployed and you need reliable 2K coverage without the CapEx of enterprise-grade turrets or PTZ heads. It's a practical choice for budget-conscious integrators who don't need to justify 4K pixel count to their client.
