TSC PEL-TH240-0001 Peel-Off Module
Overview
The PEL-TH240-0001 is a peel-off module designed to automate label separation on TSC TH240, DH240, and TH240H thermal transfer and direct thermal label printers. In high-volume warehousing and logistics environments, manual label peeling becomes a throughput bottleneck — this module handles that separation automatically, feeding stock continuously without operator intervention between label cycles. Install it on compatible TH240-series hardware and the module strips printed labels from the carrier web as they exit the print head, keeping pace with 203 dpi print operations across standard label media sizes.
Compatibility
The PEL-TH240-0001 integrates exclusively with TSC TH240, DH240, and TH240H label printer models. These printers support both thermal transfer (ribbon-based) and direct thermal (ribbon-less) print methods, so the module works across both modes without reconfiguration. Installation requires wired connectivity to the printer's control board; no firmware updates or driver changes are necessary. The module is not compatible with other TSC printer series or non-TSC thermal printing hardware.
Installation Notes
Mount the peel-off module to the label exit path on the TH240-series printer using the provided mechanical fixtures. The module draws power and control signals from the printer itself — no separate power supply is required. Ensure label media width matches your printer's specification (typically 2–4 inches) and that the label adhesive is compatible with automated peeling (low-tack or standard labels work; ultra-high-tack labels may jam the mechanism). Test with a small batch of your actual label stock before full production deployment to confirm smooth separation without tears or label jams.
