i-PRO TROVE3M3MC TROVE3 Mercury Backplane

Overview

The i-PRO TROVE3M3MC is a Mercury backplane expansion module for the TROVE3 platform, designed to extend the connectivity and power infrastructure of compatible i-PRO surveillance installations. As a backplane component, the TROVE3M3MC sits at the core of the TROVE3 modular architecture — providing the electrical and data interconnect layer that ties individual modules together into a unified, managed system. Power is delivered via PoE (802.3af), eliminating the need for a separate 12V or 24VAC power run to the backplane itself and simplifying installation in structured cabling environments.

The TROVE3M3MC carries the Panasonic i-PRO logo, confirming it is a genuine factory component for the i-PRO (formerly Panasonic Security) TROVE3 product family. If you are expanding or servicing an existing TROVE3 deployment, this is the correct OEM backplane part — aftermarket substitutes risk incompatibility with the modular slot interface and firmware handshake that the TROVE3 system relies on.

Key Features

• PoE (802.3af) Powered: Draws power directly from a standard 802.3af PoE port — no local power supply required at the backplane. This keeps the installation footprint small and eliminates an extra failure point in the power chain.
• TROVE3 Platform Integration: Built specifically for the i-PRO camera and access platform, the backplane ensures electrical and logical compatibility across all TROVE3 module slots. Cross-platform or third-party backplanes will not replicate this integration.
• Genuine i-PRO / Panasonic Component: Factory-sourced for the TROVE3 modular ecosystem — relevant when maintaining warranty coverage or firmware update eligibility on an existing TROVE3 installation.

Integration & Compatibility

The TROVE3M3MC is designed exclusively for use within the i-PRO TROVE3 modular platform. Before ordering, verify your existing TROVE3 housing and module revision against i-PRO's compatibility matrix — backplane revisions within the TROVE family are not always interchangeable. If you are specifying a new surveillance system rather than servicing an existing one, consult the current i-PRO TROVE3 product lineup to confirm this backplane revision matches your module configuration. Note: this SKU has been marked as discontinued by the manufacturer; confirm current availability before committing it to a new design.

Frequently Asked Questions

Q: What platform is the TROVE3M3MC designed for?

A: The TROVE3M3MC is the Mercury backplane for the i-PRO TROVE3 modular platform. It is not a standalone camera or recorder — it is an infrastructure component within the TROVE3 system architecture.

Q: How is the TROVE3M3MC powered?

A: The backplane is powered via standard PoE (802.3af), so it can be connected directly to any 802.3af-capable PoE switch or injector without a separate power supply.

Q: Is the TROVE3M3MC still in production?

A: This SKU has been listed as discontinued by the manufacturer. If you need this component for a service or expansion project, verify current stock availability before placing an order.

Q: Can I use a third-party backplane in place of the TROVE3M3MC in a TROVE3 system?

A: The TROVE3 platform uses a proprietary modular slot interface. A genuine i-PRO backplane is required to maintain electrical compatibility, firmware handshake, and any remaining manufacturer warranty coverage on the system.

Karl Wilson

The TROVE3M3MC is a component-level purchase — you are not buying a camera or a recorder, you are buying the PoE-powered Mercury backplane that the entire TROVE3 module stack depends on. In a service scenario, getting this wrong means pulling and re-installing hardware that was already commissioned, so confirm the exact backplane revision against your installed TROVE3 housing before the order ships.

Technical Highlights:

• 802.3af PoE Input: Draws power from a standard PoE port — keeps the installation clean and avoids running a separate power circuit to the backplane location.
• Genuine i-PRO / Panasonic Component: Factory-sourced for the TROVE3 ecosystem; critical for maintaining firmware and slot-interface compatibility across the module assembly.
• Modular Backplane Architecture: Serves as the electrical and data interconnect layer for all modules installed in the TROVE3 housing — the backplane is what makes the modular approach work.

Deployment Considerations:

• This SKU is discontinued — if you are specifying a new installation, verify with i-PRO whether a current-production replacement backplane is available before designing the TROVE3M3MC into your BOM.
• PoE (802.3af) is the power source; confirm your switch or injector budget covers the backplane draw before committing the port, especially in high-density deployments where every watt counts.

The TROVE3M3MC fits one specific scenario cleanly: servicing or expanding an existing TROVE3 Mercury installation where the original backplane needs replacement and the housing revision matches. Outside of that use case, evaluate the current i-PRO TROVE3 lineup before committing to this discontinued SKU.