Viking E-60-BK-EWP IP66 Black Entry Phone Flush/Surface Mount

Viking Electronics E-60-BK-EWP Textured Black Entry Phone with EWP

Overview

The Viking Electronics E-60-BK-EWP is a telephone-line powered, hands-free entry phone built for outdoor and semi-exposed installations where weather resistance, vandal deterrence, and dead-simple wiring are non-negotiable. Rated IP66 and operating from -30°F to 150°F with up to 100% humidity tolerance, it fits double-gang flush boxes or surface mounts out of the box — and the optional VE-5x5 enclosure extends that coverage with Enhanced Weather Protection (EWP) for fully exposed exteriors. No separate power supply needed: the unit runs entirely off talk battery from the connected phone line, which keeps installation costs low and eliminates a failure point in the power chain. For a broad look at Viking Electronics entry phones and intercoms, the full product line covers everything from basic door phones to multi-door commercial systems.

The E-60-BK-EWP (often searched as E 60 BK EWP) is purpose-built for commercial access points — building entries, parking structures, loading docks, and any location where you need reliable two-way voice without dedicating a conduit run to a power supply.

Key Features

• IP66 Ingress Protection: Sustained, high-pressure water jets and total dust exclusion won't compromise the unit. This is the rating you need for covered outdoor entries, drive-throughs, and industrial wash-down environments — not just drizzle protection. Skip this if the install is fully submerged; that requires IP67 or higher.
• Telephone Line Powered (18V DC minimum, 20mA loop current): The phone draws everything it needs from talk battery on the connected line. No 12V power brick, no low-voltage homerun to a panel. For door phones and entry intercoms in retrofit situations — where pulling extra wire is expensive — this is often the deciding spec.
• Automatic Disconnect (CPC, 300ms minimum): The unit detects CPC (Calling Party Control) disconnect signals from the host PBX or telephone system and hangs up automatically. Conversations don't stay open accidentally, and the line returns to available state without manual intervention. Critical in unattended entry points where staff won't physically hang up a handset.
• Blue LED Indicator: The illuminated push button gives visitors a clear visual cue that the unit is active and where to press — useful in low-ambient-light lobbies, parking structures, and night-time entry scenarios where a dark faceplate offers no guidance.
• 316 Stainless Steel Push Button + 18-Gauge 304 Stainless Steel Faceplate: The button uses marine-grade 316 SS — the alloy specified for coastal and chemical-exposure environments where 304 pits over time. The faceplate is 18-gauge 304 SS with a fine-texture satin black powder coat. Both grades resist casual vandalism and daily contact wear far better than painted aluminum or plastic faceplates.
• Speaker Volume 62dB max at 1m: Adequate for covered entry points with moderate ambient noise. This is not a high-output speaker designed for open loading docks or noisy industrial floors — if the ambient SPL at your entry point regularly exceeds 70dB, evaluate a higher-output solution before specifying.
• Ring Voltage 25V AC RMS minimum: Ensures the unit will ring reliably on standard POTS lines and most analog PBX ports. Confirm your PBX trunk card or FXS port delivers at least 25V AC ring to avoid missed calls.
• -30°F to 150°F Operating Range, 100% Humidity: The temperature floor covers cold-climate exterior installs in northern states and Canada without a heated enclosure. The humidity ceiling means condensation-prone environments — covered parking, loading dock overhangs, coastal climates — won't degrade electronics over time.
• Carbon Fiber Reinforced Plastic Speaker Screen: Resists impact and corrosion better than metal mesh, and doesn't rust-stain the faceplate in wet environments — a common cosmetic issue with steel grilles over time.
• Marine-Grade 316 Stainless Mounting Screws (6-32 x 3/4"): Hardware corrosion is a common field failure point. The 316 SS screws eliminate galvanic and surface corrosion at the mounting interface, which matters in coastal deployments and anywhere road salt is prevalent.
• 1/8" Closed-Cell PVC Gasket: The perimeter gasket provides the seal that achieves IP66. Closed-cell PVC doesn't absorb water, which means the gasket maintains its compression seal over years of thermal cycling — a key durability factor in climates with wide temperature swings.

Integration & Compatibility

The E-60-BK-EWP connects to any analog telephone line or analog (FXS) port on a PBX, key system, or IP gateway with an FXS interface. Automatic disconnect relies on CPC signaling from the connected system — verify your PBX or FXS gateway generates CPC (Calling Party Control) on call termination; systems that don't generate CPC will leave the entry phone line open after the called party hangs up. The REN rating of 0.8A means you can add this phone to a line alongside other devices without exceeding a standard 5.0 REN line capacity. For deployments pairing entry phones with access control, the E-60-BK-EWP can trigger door release circuits via the host phone system's relay output — integration depth depends on the PBX or controller in use. Review access control systems and door controllers that support analog phone integration if you're building a complete door-entry solution. When weather exposure is severe, pair with the VE-5x5 optional enclosure for the full EWP configuration; for intercom mounting accessories including back boxes and surface-mount housings, verify gang-box depth against the phone body dimensions: 2.84" x 1.8" x 1.65". The faceplate covers a 4.875" x 4.938" footprint at 0.17" depth over the box face.

Frequently Asked Questions

Q: Does the E-60-BK-EWP require an external power supply?

A: No. The E-60-BK-EWP is telephone line powered, drawing all necessary power from talk battery on the connected analog line. The minimum requirement is 18V DC talk battery and 20mA loop current from the host telephone system or PBX FXS port.

Q: What does the EWP designation mean, and when is the VE-5x5 required?

A: EWP stands for Enhanced Weather Protection. The base E-60-BK-EWP achieves an IP66 ingress protection rating on its own. The optional VE-5x5 surface-mount enclosure provides an additional layer of weather shielding for fully exposed installations — such as open exterior walls with no overhang — where extra protection against driving rain and environmental exposure is warranted.

Q: Will the automatic disconnect work with any phone system?

A: Automatic disconnect relies on CPC (Calling Party Control) signaling, with a minimum CPC pulse of 300ms. The host PBX, key system, or FXS gateway must generate a CPC signal on call termination. Systems that do not generate CPC will not trigger automatic hangup. Confirm CPC support with your phone system before deploying.

Q: What mounting options are available for the E-60-BK-EWP?

A: The E-60-BK-EWP flush mounts in a standard double gang electrical box. It also supports surface mounting with an appropriate back box. For installations requiring enhanced weather protection, the optional VE-5x5 surface-mount enclosure is available as an add-on accessory.

Q: What is the operating temperature range, and is a heated enclosure needed in cold climates?

A: The E-60-BK-EWP operates from -30°F to 150°F with up to 100% humidity. The -30°F lower limit covers most cold-climate exterior installations in North America without requiring a heated enclosure.

Q: What material is the push button, and why does it matter?

A: The push button is 316 stainless steel — a marine-grade alloy with superior corrosion resistance compared to standard 304 SS. This matters in coastal environments, areas with road salt exposure, or anywhere with elevated chloride levels where 304 SS would pit over time.

Marty Allison

The spec that drives most of my E-60-BK-EWP deployments is the telephone-line-only power draw — 18V DC minimum talk battery, 20mA loop current, and you're done. No low-voltage power homerun, no transformer in the back box, no second conduit. On retrofit jobs where you're adding a monitored entry point to an existing analog PBX port, that simplicity is worth real dollars in labor.

Technical Highlights:

• IP66 at -30°F to 150°F, 100% RH: Most entry phones compromise either the temperature floor or the humidity ceiling. This unit hits both simultaneously — meaning you can spec it for a northern climate parking structure (sub-zero winters, condensation-heavy springs) without qualifying a separate heated enclosure or dehumidifier pack.
• 316 SS Push Button + Marine-Grade Mounting Screws: The button and the screws are both 316 alloy — not 304. That distinction matters when you're within a mile of salt water or in a road-salt zone. 304 pits at the fastener holes within a couple of winters; 316 doesn't. This is a detail Viking got right that cheaper entry phones skip.
• CPC Auto-Disconnect, 300ms Minimum: In unattended lobby deployments, the auto-hangup via CPC is what keeps the line available for the next visitor. The 300ms CPC minimum is a compatibility threshold — most modern analog PBX ports and FXS gateways generate CPC well above that floor, but older Nortel and some legacy Avaya analog cards are worth checking before you close the design.

Deployment Considerations:

• The double-gang flush mount is the cleanest install, but confirm back-box depth before rough-in: the phone body is 1.65" deep and needs clearance behind the faceplate. Standard 2" deep gang boxes are fine; shallower retrofit boxes can be tight.
• Speaker output is rated at 62dB maximum at 1 meter — sufficient for covered entries and enclosed lobbies, but not for open industrial environments with continuous background noise above 65–70dB. If the entry point is adjacent to a loading dock compressor or HVAC unit, the caller on the far end will hear it clearly and the visitor may struggle to hear the reply.

The E-60-BK-EWP is the right call for commercial building entries, gated community pedestals, and university facility access points where the phone system is analog or analog-hybrid, the environment is harsh, and you need a no-fuss install that holds up for years without a service visit.