Server Technology STV-FB624HA-532P6 Switched 3-Phase PDU, 24-Outlet

Overview

The Server Technology STV-FB624HA-532P6 is a switched PRO2 POPS PIPS power distribution unit built for data center racks where per-outlet control and branch-level current visibility matter more than a basic strip. It carries 24 total outlets — 18x IEC C13 and 6x Cx — fed from a single 32A, 230/400V, 3-Phase Wye input through an IEC 60309 32A 3P+N+G plug. If you're provisioning rack power for a cabinet mixing standard servers with higher-draw switching or storage gear, the C13/Cx outlet split on the STV-FB624HA-532P6 lets you match connector type to load without adapters.

Key Features

• 24 total outlets (18x IEC C13 + 6x Cx): covers a full rack of standard C14-corded servers plus six higher-capacity Cx-terminated devices on the same strip — no need to split a cabinet across two PDUs for mixed cord types.
• Switched, individually controllable outlets: POPS PIPS (Per-Outlet Power Sensing / Per-Outlet Power Switching) architecture means each outlet can be cycled remotely — useful for rebooting a hung device without a trip to the data center floor.
• Input Amp Meters: onboard current metering at the input gives you a real-time read on total draw against the 32A input rating, so you can catch a cabinet trending toward capacity before it trips a breaker.
• 32A, 230/400V, 3-Phase Wye input: higher-capacity feed than a standard single-phase strip, letting one PDU support a denser cabinet load instead of running two lower-amperage units.
• IEC 60309 32A 3P+N+G input plug: a standard industrial 3-phase connector — confirm your cabinet's upstream receptacle matches this plug type before ordering, since 3-phase Wye distribution isn't interchangeable with delta-wired feeds.
• 4.0m input cord length: reaches most overhead or underfloor 3-phase whips without an extension, useful in cabinets where the upstream panel isn't directly adjacent to the PDU mounting position.
• 2U rackmount form factor: mounts horizontally in standard 19-inch rack space, a straightforward fit for cabinets already planned around U-height budgets rather than zero-U vertical rail space.

Integration & Compatibility

The STV-FB624HA-532P6's switched outlet architecture is built for environments already running network video recorders or server infrastructure that benefits from remote outlet cycling and branch metering — typical in colocation cages and multi-tenant cabinets where per-device power accountability is part of the SLA. Pair it with a rack mount enclosure sized for 2U PDU placement, and route data cabling separately from the 3-phase input whip to keep NEC-relevant separation between power and low-voltage runs. For broader rack power planning across a row of cabinets, a PoE and power planning guide is a useful reference point before finalizing feed sizing. Server Technology's Server Technology PDU line and the broader power distribution units category are worth reviewing if this specific outlet mix or input rating doesn't match your cabinet's load profile — Server Technology builds PRO2 PDUs across multiple outlet counts and input configurations. STV-FB624HA-532P6 (often searched as STV FB624HA 532P6) is positioned for 3-phase cabinets specifically; single-phase 208V or 120V cabinets need a different input configuration entirely.

Frequently Asked Questions

Q: What input voltage does the STV-FB624HA-532P6 require?

A: It requires a 230/400V, 3-Phase Wye, 32A input fed through an IEC 60309 32A 3P+N+G plug.

Q: How many outlets does the STV-FB624HA-532P6 have, and what types?

A: 24 total outlets: 18x IEC C13 and 6x Cx.

Q: Are the outlets on the STV-FB624HA-532P6 individually switched?

A: Yes — this is a switched PRO2 POPS PIPS unit, meaning outlets support per-outlet power sensing and switching.

Q: Does the STV-FB624HA-532P6 provide current monitoring?

A: Yes, it includes input amp meters for real-time current draw visibility at the input.

Q: What is the rack form factor of the STV-FB624HA-532P6?

A: It is a 2U rackmount unit.

Q: How long is the input power cord on the STV-FB624HA-532P6?

A: The input cord measures 4.0 meters.

Ted Perry

The outlet mix on the STV-FB624HA-532P6 is what stands out to me first — 18x IEC C13 plus 6x Cx on one strip means you're not forced to split a cabinet's power feed across two PDUs just because a few devices use a different cord type. Combined with the 32A 3-phase Wye input, this is built for a cabinet with real load headroom, not a light single-phase closet install.

Technical Highlights:

• 32A, 230/400V, 3-Phase Wye input: a single IEC 60309 32A 3P+N+G feed can support meaningfully more connected load than a typical single-phase 208V/30A strip, which matters when you're trying to keep outlet count high without daisy-chaining PDUs.
• 18x C13 + 6x Cx outlet split: covers standard C14-corded servers and higher-draw Cx-terminated gear on one unit — fewer PDUs to manage, meter, and cable in the cabinet.
• Input Amp Meters with switched POPS PIPS outlets: per-outlet switching plus input-level current metering gives you both remote reboot capability and a running check against the 32A input ceiling before a breaker trips.

Deployment Considerations:

• Confirm the upstream receptacle is genuinely 3-phase Wye before ordering — the IEC 60309 32A 3P+N+G plug on the STV-FB624HA-532P6 won't mate with a delta-wired or single-phase circuit.
• The 4.0m input cord is generous for most cabinet-to-panel runs, but measure the actual path (including any cable management routing) in rows where the panel isn't adjacent to the rack.

This is the right PDU for a colocation or multi-tenant cabinet running mixed C13 and Cx-corded equipment off a shared 3-phase feed, where per-outlet switching and input metering are part of how the operator tracks and manages branch load — not for a single-phase edge closet with a handful of low-draw devices.