Panduit SRBWCY Strain Relief Bar with Adjustable Clips

Overview

The Panduit SRBWCY is a 1U, 19-inch rack-mount strain relief bar designed to manage and secure up to 24 copper patch cables in standard equipment racks. Built from cold-rolled steel (CRS) and finished in black, the SRBWCY integrates adjustable clips and a quick-release mounting mechanism that lets you install or swap it without tools — a practical detail when you are working inside a dense patch field under time pressure. If you are running structured copper cabling through high-density patch panels and need a code-clean, organized termination point that won't let gravity and cable weight stress your RJ-45 connections, this is the hardware to use.

Key Features

• Supports up to 24 cables: Each integrated adjustable clip secures an individual cable run, keeping patch leads dressed flat and preventing the sag that eventually works RJ-45 connectors loose — particularly important in high-vibration environments like raised-floor data closets near HVAC equipment.
• Quick-release mounting: The snap-in installation mechanism lets you mount or remove the SRBWCY without a screwdriver. In practice that means less time spent fumbling inside a loaded rack during a cable audit or panel swap.
• 19-inch (482.6 mm) rack width: Spans the full standard EIA-310 rack opening, so it aligns flush with 1U patch panels and switches. No adapters, no offset brackets — it drops straight into the rack rails.
• 1U profile (36.3 mm height): At 1.43 inches tall, the SRBWCY consumes exactly one rack unit. Plan one unit of overhead for every patch panel row you want to strain-relieve — a 48-port panel tier typically needs one SRBWCY directly below or above it.
• Cold-rolled steel (CRS) construction: CRS offers better dimensional tolerance and surface finish than hot-rolled alternatives, which matters for clip alignment across 24 positions. The formed steel body won't flex under a full load of Cat6A patch leads the way plastic equivalents can.
• Adjustable clips: Clips accommodate varying cable diameters — relevant when you are mixing Cat5e and Cat6A or tying off bundled multi-cable runs rather than individual patch leads.
• RoHS-compliant: Meets EU RoHS requirements, so it qualifies for installations where the full bill-of-materials must be RoHS-clean — common in government, healthcare, and EU-destined deployments.
• Black finish: Matches standard black rack hardware and patch panels. Keeps the visual field consistent in client-facing comms rooms where appearance is part of the deliverable.

Integration and Compatibility

The SRBWCY is designed for use with standard 19-inch equipment racks. Panduit lists competitor part WM-6A as a comparable reference, which places this bar in the same functional class as Leviton and Ortronics strain relief bars used with high-density copper patch panels. It is sold individually (package quantity: 1) with a carton quantity of 10, so volume pricing applies when ordering for multi-rack deployments. No additional mounting hardware is listed in the evidence — the quick-release mechanism is self-contained.

Frequently Asked Questions

Q: How many cables does the SRBWCY support?

A: The SRBWCY supports up to 24 cables via its integrated adjustable clips.

Q: What rack size does the SRBWCY fit?

A: It fits standard 19-inch (482.6 mm) equipment racks and occupies 1U (36.3 mm / 1.43 inches) of rack space.

Q: Is the SRBWCY RoHS compliant?

A: Yes, the SRBWCY meets RoHS requirements as listed in its standards documentation.

Q: What material is the SRBWCY made from?

A: The SRBWCY is constructed from cold-rolled steel (CRS) with a black finish.

Q: Does the SRBWCY require tools for installation?

A: No. The SRBWCY features a quick-release mounting mechanism for tool-free installation and removal.

Q: Is the SRBWCY sold individually or in bulk?

A: It is sold individually (package quantity of 1), with a carton quantity of 10 for volume orders.

James Everett

The SRBWCY is a detail that separates a structured installation from a rats-nest remediation call six months later. The 24-position adjustable clip array is the spec that matters most here — at 1U, you are expected to relieve an entire 24-port patch panel row in a single bar, and the adjustable clips mean you are not locked into a single cable gauge across those 24 positions.

Technical Highlights:

• 24-cable capacity in 1U: One bar per 24-port panel tier is the standard layout — the SRBWCY is dimensioned exactly for this, at 19 inches wide and 1.43 inches tall, so the math works out without spacer units.
• Cold-rolled steel body: CRS holds its shape under a full load of Cat6A patch leads. Plastic strain relief bars at this density tend to bow over time; the formed steel body of the SRBWCY does not.
• Quick-release mount: Tool-free removal is not a luxury in a hot-aisle rack — it is a safety consideration. You do not want to be reaching past live patch fields with a screwdriver to pull a bar during a cable audit.

Deployment Considerations:

• Plan your rack unit budget before ordering: one SRBWCY per 24-port patch panel row, mounted directly above or below the panel. A 4-panel stack needs 4 SRBWCY units minimum — order in carton quantities of 10 for multi-rack projects.
• The overall length listed in evidence is 1.25 inches — this is the depth dimension, not a second width. Confirm your rack's rail-to-rail depth accommodates the bar before committing to a large order if you are working with non-standard rack depths.

The SRBWCY earns its place in any high-density copper patch field — particularly in MDF/IDF closets running 24-port Cat6A panels where cable weight and bend radius management directly affect long-term link performance and troubleshooting time.