Middle Atlantic STL Blank END FTG 6000 GR - G6010B

Middle Atlantic G6010B Steel Blank End Fitting for 6000-Series Raceway

Overview

The Middle Atlantic G6010B is a steel blank end fitting designed to terminate open ends of 6000-series raceway and cord cover runs. At 4.75 in wide × 1.63 in tall × 3.63 in deep (12.1 × 4.1 × 9.2 cm), it caps exposed raceway terminations cleanly — eliminating raw-edge hazards and delivering a finished appearance on wall-mounted cable management installations. If you're closing out a 6000-series run at a panel, junction, or wall end-point, the G6010B is the purpose-fit termination piece for that job.

Key Features

• TAA Compliant: The G6010B meets Trade Agreements Act requirements — a non-negotiable checkpoint for federal, state, and municipal installation projects that mandate TAA-compliant components throughout the bill of materials.
• Gray finish: The standard gray color matches the 6000-series raceway family, so the end fitting blends into the run rather than drawing attention to the termination point. Relevant wherever aesthetics matter alongside function — conference rooms, executive floors, lobbies.
• Compact footprint (4.75" W × 1.63" H × 3.63" D): The shallow profile keeps the fitting close to the wall surface and doesn't protrude beyond the raceway body, maintaining a flush termination without requiring additional clearance planning.
• Purpose-built for 6000-series: Engineered specifically for Middle Atlantic's 6000-series steel raceway system, which means fitment is exact — no shimming, no modification, no field fabrication to close an open end.

Integration & Compatibility

The G6010B is designed for use with Middle Atlantic 6000-series steel raceway and cord cover products. It functions as a termination cap within a complete cable management system — pair it with straight sections, elbows, couplers, and cover plates from the same 6000-series family to build out a fully enclosed cable pathway. For projects requiring a raceway fittings bill of materials for code compliance or procurement documentation, the TAA compliance status simplifies the federal acquisition process. Consult a cable management planning guide when designing raceway runs that include turns, drops, or multi-segment pathways.

Frequently Asked Questions

Q: Is the Middle Atlantic G6010B TAA compliant?

A: Yes. The G6010B is TAA (Trade Agreements Act) compliant, making it suitable for federal, state, and municipal projects with TAA sourcing requirements.

Q: What raceway series does the G6010B fit?

A: The G6010B is engineered specifically for Middle Atlantic's 6000-series steel raceway and cord cover system.

Q: What are the dimensions of the G6010B?

A: The G6010B measures 4.75 in wide × 1.63 in tall × 3.63 in deep (12.1 × 4.1 × 9.2 cm).

Q: What color is the G6010B?

A: Gray — matching the standard 6000-series raceway finish for a consistent installed appearance.

Q: Is the G6010B a fitting for steel raceway?

A: Yes. The G6010B is a steel blank end fitting, part of Middle Atlantic's 6000-series steel raceway line.

Eden Phillips

The G6010B is a small part with a specific job: capping the open end of a 6000-series steel raceway run. At 4.75 in wide and just 1.63 in tall, it's sized exactly to the 6000-series profile — which matters because a misfitted end cap gaps, catches cables, or simply looks wrong on a finished installation.

Technical Highlights:

• TAA Compliance: Verified TAA-compliant status on the G6010B means it can go on a GSA schedule order or any government-funded installation BOM without triggering a sourcing exception.
• Dimensional fit (4.75" × 1.63" × 3.63"): The 3.63 in depth matches the 6000-series raceway body depth, so the cap sits flush rather than proud of the run — no trimming or shimming required on a standard installation.
• Gray finish: Matches the 6000-series family color, which matters on exposed above-desk or wall-surface installations where a mismatched white or beige cap stands out immediately.

Deployment Considerations:

• Confirm you're working with the 6000-series specifically — Middle Atlantic produces multiple raceway series, and end fittings are not cross-compatible across series widths.
• Stock a few extras on larger raceway deployments; end fittings are easy to omit from an initial BOM and difficult to source locally on short notice during a cutover window.

Best fit for government facilities, higher-education AV installs, or commercial buildouts running 6000-series Middle Atlantic raceway where TAA compliance is a hard procurement requirement and a clean termination finish is expected.