Middle Atlantic Blank END FTG - ALA4810B

Middle Atlantic ALA4810B Blank END FTG

Overview

The Middle Atlantic ALA4810B is an aluminum blank end fitting designed for Wiremold cable management systems in commercial installations. This fitting serves as a termination point or placeholder in horizontal or vertical cable runs, providing a clean, finished appearance while maintaining system integrity. The ALA4810B integrates into standard Wiremold raceway assemblies to seal unused outlets or adapt raceway sections without exposing internal cable pathways—a practical necessity when routing power and data in open office, retail, or server room environments where cable aesthetics and safety matter.

Key Features

• Aluminum construction: Lightweight and corrosion-resistant material reduces maintenance overhead in commercial HVAC-heavy spaces where steel fittings can oxidize. Aluminum also simplifies wall mounting without requiring heavy-duty fasteners.
• 600V rated: Engineered to handle standard commercial branch circuit voltages (120/208/277V typical), so it's safe for general-purpose power, control, and low-voltage data cabling in the same raceway system without voltage separation concerns.
• cULus listed (E41751): Third-party certification ensures compliance with electrical safety codes in the US and Canada—a requirement for any component in a code-inspected commercial build-out. Eliminates questions during final inspection.
• 6.0-inch length with 2.187-inch height: Compact profile fits standard Wiremold raceway dimensions without requiring custom fabrication or adapter plates. Precise sizing ensures tight fit and professional appearance in visible installations.
• Wall-mount installation: Designed for on-wall raceway systems typical in open layouts, retail displays, and office environments. No concealed rough-in work required; installs directly over drywall or finished surfaces.
• Silver finish: Neutral, professional appearance blends with standard building finishes and doesn't require paint or finish work. Compatible with both contemporary and traditional interior schemes.
• 1-year manufacturer warranty: Covers defects in material and workmanship, providing peace of mind on a modular system component that may be replaced or reconfigured as future layouts change.

Integration & Compatibility

The ALA4810B is part of the Middle Atlantic Wiremold product line, a modular cable management ecosystem widely used in commercial surveillance, networking, and building control installations. This fitting is designed to mate with standard Wiremold raceway channels and junction boxes. Confirm your existing raceway profile and width before ordering to ensure proper fit—Wiremold offers multiple raceway sizes (2x3, 4x4, 6x6 inch cross-sections), and blank fittings are profile-specific. If you're extending an existing Wiremold system or retrofitting new cable runs alongside surveillance and access control wiring, verify the ALA4810B matches your installed raceway gauge. The fitting's aluminum body and electrical rating make it suitable for mixed-voltage environments where power, network, and security camera cabling share the same raceway—common in modern commercial spaces.

What's in the Box

The ALA4810B is supplied as a single blank end fitting. No mounting hardware, fasteners, or additional components are included in the base unit. Installation requires standard wall anchors or fasteners appropriate to your wall type (drywall, concrete, or finished surface)—coordinate these separately with your electrical or systems contractor based on your specific mounting surface.

Frequently Asked Questions

Q: Is the ALA4810B compatible with all Wiremold raceway sizes?

A: No. The ALA4810B is sized for a specific Wiremold raceway profile. Verify the cross-section and gauge of your existing or planned raceway (e.g., 2x3, 4x4, 6x6 inch) before ordering. Middle Atlantic offers blank fittings across multiple profile sizes—confirm your match with the product documentation or system spec sheet for your raceway selection.

Q: Can the ALA4810B be used indoors and outdoors?

A: The ALA4810B is rated for indoor installation only. If you require a blank fitting for outdoor or wet locations, consult a different fitting designed for IP66/IP67 or NEMA 4X environments, or use a sealed enclosure adapter.

Q: What fasteners do I need to mount the ALA4810B to a wall?

A: The ALA4810B itself weighs 0.106 lb (negligible load), so standard drywall anchors or concrete fasteners rated for light wall-mounted equipment are sufficient. Use anchors appropriate to your wall material and finishing—your electrical contractor or systems integrator will select the correct fastener gauge based on local code and site conditions.

Q: Does the ALA4810B come with a warranty?

A: Yes. The ALA4810B includes a 1-year manufacturer warranty covering defects in material and workmanship. This covers the fitting itself; labor, installation, or replacement of damaged raceway sections are not included.

Q: Is the ALA4810B cULus listed for all US and Canadian electrical codes?

A: The ALA4810B carries cULus listing number E41751, which confirms compliance with electrical safety standards recognized in both the US and Canada. This listing satisfies code requirements for commercial installations; verify with your local Authority Having Jurisdiction (AHJ) if additional certifications or labeling are required for your specific project.

Eden Phillips

From a systems integration standpoint, the Middle Atlantic ALA4810B is a straightforward but often overlooked necessity in commercial cable management. When you're routing mixed power and data through Wiremold raceway in an open office or retail build-out, you need clean termination points that don't expose live cable runs or leave gaps that invite dust infiltration. The ALA4810B's 600V rating and cULus listing (E41751) mean it handles the voltage class of typical branch circuits without requiring separate conduit—a real time-saver when coordinating with electrical contractors on inspection sign-off.

Technical Highlights:

• Aluminum body, 0.106 lb weight: Corrosion-resistant and fast to install without requiring heavy fastening hardware. On a 40-camera open office retrofit, these small weight and labor savings compound across dozens of termination points.
• 600V rating: Covers all standard commercial power voltages (120V, 208V, 277V) in a single SKU—no need to track different voltage-rated fittings. Simplifies procurement and reduces inventory SKU sprawl on larger jobs.
• cULus E41751 certification: Third-party listing satisfies final electrical inspection without exceptions or re-work orders. Speeds code sign-off and protects you from liability if an inspector flags unlisted components later.

Deployment Considerations:

• Profile-specific fit: the ALA4810B is sized for a particular Wiremold raceway cross-section. If you're mixing raceway sizes or retrofitting into an older Wiremold system, confirm your profile before ordering—a mismatch delays the job by days waiting for the correct fitting.
• Indoor-only rating: this fitting has no weathering protection. If your surveillance or access control cabling crosses an exterior wall or roof overhang, use a sealed adapter or NEMA 4X fitting instead; the ALA4810B will not survive UV or rain exposure.

The ALA4810B is purpose-built for commercial office, retail, and corporate IT environments where cable runs stay on-wall and visible. If you're pulling Wiremold raceway across a data center wall or retail display and need a professional-looking sealed endpoint, this fitting closes that gap. For outdoor or wet-location cable management, you'll need a different solution.