Middle Atlantic NM Blank END FTG 2700 IVO - 2710B

Middle Atlantic 2710B 2700 Series Blank End Fitting – Ivory PVC

Overview

The Middle Atlantic 2710B is a non-metallic blank end fitting designed to terminate and cap open runs of cable management raceway in the 2700 Series UniDuct system. If you've ever finished a raceway run and left the end open — collecting dust, snagging cable jackets, or just looking unfinished — this is the part that closes it out properly. Made from ivory-colored polyvinyl chloride (PVC), the 2710B snaps onto the end of a 2700 Series duct to present a clean, finished edge with no exposed channel lips or raw plastic cuts.

This is a single-unit pack: one 2710B end fitting per order. It's the right SKU when you need to close out one specific run; order in quantity if you're terminating multiple duct segments on the same project.

Key Features

• 2700 Series Compatibility: The 2710B is purpose-built for Middle Atlantic's 2700 Series non-metallic raceway. It won't fit other duct families, which means no guessing or forcing — it seats correctly the first time on the intended duct profile. If you're running a different duct width or series, verify the part number before ordering.
• PVC Construction: Polyvinyl chloride gives you a lightweight, non-conductive end cap that won't corrode in typical commercial indoor environments. PVC also holds color consistently, so the ivory finish stays matched to the duct body over time rather than yellowing at a different rate.
• Ivory Color Match: Designed to match the ivory finish of 2700 Series duct installed in office corridors, server rooms, and AV equipment areas where the raceway runs exposed and color consistency matters. If your installation uses white or gray duct, confirm the duct body color before specifying the 2710B.
• TAA Compliant: The 2710B carries TAA (Trade Agreements Act) compliance, which matters for government projects, federally funded facilities, and any procurement process that requires products of qualifying country of origin. If your bid spec calls for TAA, this fitting checks that box without requiring a separate sourcing justification.
• Maximum Cable Diameter 3.2 cm: The 2700 Series duct accommodates cables up to 3.2 cm in diameter through the channel. The end fitting is sized to match that profile, so cable bundles that fit the duct will pass through or terminate at the fitting without obstruction or pinching.
• Non-Metallic Construction: PVC is inherently non-conductive, which eliminates any concern about accidental grounding paths or interference with low-voltage cabling in the duct. For AV, security, or structured cabling runs, that's one less variable to manage during commissioning.
• Single-Piece Pack: Comes as one fitting. This makes it easy to add exactly what you need to a project order without overstocking. For larger raceway installations with multiple termination points, simply order the quantity you need.

Integration and Compatibility

The 2710B integrates exclusively with the Middle Atlantic 2700 Series non-metallic raceway system. It is not a universal fitting and is not rated for outdoor, wet, or plenum applications based on available evidence — verify environmental suitability with the full 2700 Series product documentation before specifying in those environments. For projects requiring structured cable management across racks, walls, or equipment bays, the 2710B works as the finishing component at the terminal end of a duct run, keeping the installation looking deliberate rather than abandoned mid-run.

TAA compliance makes this fitting suitable for government facility and public-sector AV or security installations where supply chain origin documentation is a procurement requirement.

Frequently Asked Questions

Q: Is the Middle Atlantic 2710B TAA compliant?

A: Yes. The 2710B is TAA (Trade Agreements Act) compliant, making it suitable for government and federally funded facility projects with qualifying country-of-origin requirements.

Q: What raceway series is the 2710B compatible with?

A: The 2710B is designed specifically for the Middle Atlantic 2700 Series non-metallic UniDuct raceway. It is not a universal fitting and is not listed as compatible with other duct series.

Q: What color is the 2710B end fitting?

A: Ivory. It is designed to match the ivory finish of the 2700 Series duct body for a consistent installed appearance.

Q: What material is the 2710B made from?

A: The 2710B is made from polyvinyl chloride (PVC), a non-conductive, lightweight thermoplastic appropriate for commercial indoor cable management applications.

Q: How many end fittings come in one order of the 2710B?

A: One (1) fitting per pack. Order the quantity matching the number of duct terminations your project requires.

Q: What is the maximum cable diameter the 2700 Series duct and 2710B fitting accommodate?

A: The 2700 Series duct accommodates cables up to 3.2 cm in diameter. The 2710B end fitting is sized to match this channel profile.

Eden Phillips

The 2710B does one job — it caps the open end of a 2700 Series non-metallic duct run — and it does it with the correct ivory PVC to match the duct body. On AV and security installs where raceway runs exposed through drop ceilings, server rooms, or equipment corridors, an unfinished duct end is a cosmetic and functional liability. The 2710B closes that out with a purpose-fit component rather than a field-cut workaround or a mismatched cap from a different manufacturer's line.

Technical Highlights:

• TAA Compliance: Confirmed TAA compliant — relevant for any government facility, courthouse, federal building, or publicly funded project where supply-chain origin documentation is a bid requirement. Saves the hassle of sourcing a compliant alternative at the last minute.
• PVC Non-Conductive Material: PVC construction means no accidental grounding path for low-voltage cable runs — security cabling, structured Cat6, or AV signal lines all terminate without any metallic contact risk at the duct end.
• 3.2 cm Max Cable Diameter: Sized to match the 2700 Series duct profile exactly — cable bundles that fit the duct channel fit through or past the end fitting without pinching or re-routing.

Deployment Considerations:

• The 2710B is series-specific. Verify the installed duct is 2700 Series before ordering — other Middle Atlantic duct families use their own end fittings and these are not interchangeable.
• Ivory color matches the standard 2700 Series duct body. If the duct in your installation has aged or been painted, visually confirm the color match before finalizing the order — there is no evidence of alternate color variants for this fitting.

Best fit for commercial AV integrators and security contractors closing out 2700 Series raceway runs in office buildings, government facilities, or equipment rooms where TAA compliance and a clean finished appearance are both project requirements.