Middle Atlantic STL Blank END Fitting 600 - V6010B

Middle Atlantic V6010B STL Blank End Fitting for 6000-Series Raceway

The Middle Atlantic V6010B is a blank end fitting designed to close off and finish the open ends of Middle Atlantic's 6000-series steel raceway runs. At 4.75 in wide, 1.63 in tall, and 3.63 in deep, it provides a clean, professional termination point wherever a raceway run ends at a wall, column, panel, or junction — keeping exposed cable ends out of sight and preventing debris ingress into the channel. If you're specifying Middle Atlantic cable management for a structured AV or security installation, this fitting is the detail that separates a finished job from an open-ended one.

Overview

The V6010B is factory-finished in ivory to match the standard Middle Atlantic 6000-series raceway color palette. It ships as a passive, tool-assisted snap or screw-mount cap — no active components, no power, no terminations. Its role is purely mechanical: cap the end of a raceway segment and give the installation a complete, code-acceptable appearance. TAA compliance means it's eligible for U.S. federal, state, and municipal government projects subject to the Trade Agreements Act — a procurement requirement on many GSA schedules and agency bids. If your project spec sheet calls out TAA on infrastructure components, the V6010B checks that box without requiring a substitution or waiver.

This fitting belongs in any project where structured cable management raceway terminates at a fixed point: security operations centers, classroom AV installs, retail surveillance backrooms, or government facilities where clean conduit termination is part of the scope. It's a small line item, but missing it means an open raceway end — which is both an aesthetic issue and a potential code concern on finished wall installations.

Key Features

• Compact footprint (4.75" W × 1.63" H × 3.63" D): The V6010B's dimensions are sized specifically for the 6000-series raceway profile, so it seats flush without protruding beyond the raceway body. Measure your available clearance at the termination point — particularly in tight column-mount or baseboard-adjacent runs where depth matters.
• Ivory finish: Factory-matched to the standard 6000-series raceway color, so the end fitting blends with the installed channel rather than standing out as a visible cap. On exposed runs in finished office or lobby environments, color continuity matters to the end client.
• TAA Compliant: The V6010B meets Trade Agreements Act requirements, making it eligible for government procurement on TAA-mandatory projects. When your project BOM requires TAA compliance down to infrastructure fittings, this fitting qualifies without a sourcing exception.
• Steel construction: As part of the Middle Atlantic 6000-series steel raceway line, the end fitting is built to the same commercial-grade material standard as the raceway itself — relevant in environments where plastic fittings would be flagged during inspection or where vandal-resistance is a soft requirement.

Integration & Compatibility

The V6010B is designed specifically for the Middle Atlantic 6000-series steel raceway system. It is not a universal end cap — confirm that your installed raceway is the 6000-series before ordering. Middle Atlantic offers separate end fittings for other raceway series (500, 700, 800), and cross-series fittings will not seat correctly. For installations that require a power entry, data port, or brush insert at the raceway termination point rather than a blank cap, Middle Atlantic offers function-specific end fitting variants within the same series. Pair the V6010B with the appropriate raceway fittings and accessories — inside corners, outside corners, couplers, and reducing fittings — to complete a fully closed cable management run.

Frequently Asked Questions

Q: Is the Middle Atlantic V6010B TAA compliant?

A: Yes. The V6010B is TAA compliant, making it eligible for U.S. federal, state, and municipal projects subject to Trade Agreements Act procurement requirements.

Q: What color is the V6010B?

A: The V6010B is finished in ivory, matching the standard Middle Atlantic 6000-series steel raceway color palette.

Q: What are the dimensions of the V6010B?

A: The V6010B measures 4.75 in wide, 1.63 in tall, and 3.63 in deep (12.1 cm × 4.1 cm × 9.2 cm).

Q: Which raceway series is the V6010B compatible with?

A: The V6010B is designed for the Middle Atlantic 6000-series steel raceway. It is not compatible with other Middle Atlantic raceway series (such as the 500, 700, or 800 series) — confirm your installed raceway series before ordering.

Q: Is the V6010B suitable for government facility installations?

A: Yes. Its TAA compliance makes it appropriate for government facilities and GSA schedule projects that require TAA-compliant infrastructure components. Verify your specific contract's compliance requirements with your contracting officer.

Jerry Tildsen

The V6010B is the kind of fitting that gets overlooked on a BOM until an inspector or end-client notices an open raceway end on a finished wall. At 4.75 in wide and 3.63 in deep, it's sized to seat flush against the 6000-series channel profile — not a universal cap you're forcing into place, but a purpose-built termination for this specific raceway family.

Technical Highlights:

• TAA Compliance: Confirmed TAA compliant — on government and GSA schedule projects where infrastructure components are scrutinized, this matters and saves you a substitution request mid-project.
• Matched Dimensions (4.75" × 1.63" × 3.63"): Sized to the 6000-series profile. A mismatched end fitting from a different series will gap or overhang — this one doesn't.
• Ivory Factory Finish: Color-matched to standard 6000-series raceway, so the termination point reads as part of the system rather than an afterthought on exposed runs in client-facing spaces.

Deployment Considerations:

• Verify your raceway series is 6000 before ordering — Middle Atlantic end fittings are series-specific and do not cross-fit. The 6000-series designation should be marked on the raceway channel or confirmed against the original project BOM.
• If the termination point requires a brush insert, data port, or power entry rather than a solid blank, spec the appropriate functional end fitting variant from the same 6000-series accessory line — the V6010B is a blank cap only, with no cutouts or inserts.

The V6010B is the right call on 6000-series raceway runs terminating at fixed endpoints in government buildings, SOCs, and commercial AV installs where TAA compliance is a procurement requirement and open raceway ends aren't an option.