Product images are provided for reference and may not represent the exact model, configuration, or included components.

No Bots, Just Experts

Questions about this product? Free pre-sales support from a senior specialist — product questions, compatibility checks, BOM quotes, price confirmation — typically answered within one business day. Need camera placement or system design work? Engineering time is $175 per hour (qty 1 = 1 hour). Hardware buyers get up to one hour ($175) credited back on their order.

Description

STI BPP2016 Polycarbonate Back Panel

Overview

The STI BPP2016 is a 20-inch by 16-inch polycarbonate back panel built to reinforce and protect access control installations in indoor and outdoor environments. EnviroArmour® polycarbonate construction resists vandalism, accidental impact, and environmental degradation — meaning longer equipment life and fewer service calls on exposed reader and strike assemblies. This panel mounts as a backing structure for reader plates, electromagnetic locks, request-to-exit devices, and other low-voltage access control hardware that would otherwise be vulnerable to weather, UV, and physical damage. Operates at 9VDC, integrating directly into standard access control power supplies.

Compatibility

The BPP2016 is designed for STI access control system architectures and reader assemblies that require protective mounting and reinforcement. It functions as a universal backing component for electromagnetic strikes, card readers, and REX buttons within STI system frameworks. The 9VDC specification ensures compatibility with standard low-voltage access control power supplies and control modules commonly deployed in commercial security installations. Integrators installing reader arrays, door-mounted electronics, or weather-exposed control points benefit from the rigid polycarbonate frame to secure multiple devices and protect against tampering and environmental wear.

Installation Notes

The BPP2016 uses four fixed mounting points drilled through the face plate. A 7mm masonry drill bit is required for wall installations. Position the back panel centrally over the devices to be protected, mark the four hole locations, drill through to substrate (masonry, wood, or metal stud as applicable), and secure with provided wall fasteners. For surface-mounted configurations, unused cable entry holes can be blanked off using the included spacer inserts. Apply the weather gasket if the installation is exposed to direct rain or high-moisture conditions. No special tools beyond standard drill and fasteners are needed.

Specifications
Product Type: Lock/Strike
Voltage: 9VDC
Type: Lock/Strike
Environment Rating: Outdoor
Warranty: Manufacturer Warranty
product_type: Lock/Strike
Compatible With: security
Form Factor: enclosure
Type: Polycarbonate Back Panel 20" 16"
Product_Type: Polycarbonate Back Panel
Brand: STI
MPN: BPP2016
Power: 9V DC
Q&A
Reviews
Have Questions?

STI EnviroArmour® Polycarbonate Back Panel - 20" x 16" - BPP2016

$86.37
$85.99

RELATED PRODUCTS

Save $0.81
STI EnviroArmour® Polycarbonate Back Panel - 18" x 16" - BPP1816
Add to Cart The item has been added

STI BPP1816

STI EnviroArmour® Polycarbonate Back Panel - 18" x 16" - BPP1816

N 18" × 16" polycarbonate back panel designed to shield access control readers and mounting hardware from environmental exposure and accidental impact

  • Polycarbonate construction resists impact and weather at outdoor reader installations.
  • 18" × 16" panel shields access control readers and mounting hardware from exposure.
  • Operates at 9VDC, aligning with standard STI access control power supply configurations.
Free shipping over $499
$65.80 $64.99 Save $0.81
The item has been added Add to quote
$65.80 $64.99 Save $0.81
Save $0.81 Add to cart Add to quote
Save $0.71
STI EnviroArmour® Polycarbonate Back Panel - 16" x 14" - BPP1614
Add to Cart The item has been added

STI BPP1614

STI EnviroArmour® Polycarbonate Back Panel - 16" x 14" - BPP1614

16" x 14" polycarbonate back panel that shields access control readers and strike hardware from moisture, dust, and impact damage

  • Clear polycarbonate construction keeps wiring and mounting points visible during install.
  • Outdoor-rated enclosure shields readers and strike hardware from moisture, dust, and impact.
  • Designed for 9VDC reader and door strike assemblies within the STI product ecosystem.
Free shipping over $499
$51.70 $50.99 Save $0.71
The item has been added Add to quote
$51.70 $50.99 Save $0.71
Save $0.71 Add to cart Add to quote
Save $161.15
STI BPP4836 Polycarbonate Back Panel Strike Protection
Add to Cart The item has been added

STI BPP4836

STI BPP4836 EnviroArmour Polycarbonate Back Panel

Polycarbonate back panel designed to mount and protect STI strike assemblies in outdoor and high-moisture environments

  • Polycarbonate construction resists corrosion, impact, and weather in outdoor deployments.
  • Integrated gasket design blocks water ingress at cable entry points, reducing maintenance.
  • Four fixing holes support masonry and concrete mounting; 7mm drill bit recommended.
Free shipping over $499
$407.14 $245.99 Save $161.15
The item has been added Add to quote
$407.14 $245.99 Save $161.15
Save $161.15 Add to cart Add to quote
Save $0.87
STI BPP2424 24x24 Polycarbonate Back Panel Access Control
Add to Cart The item has been added

STI BPP2424

STI EnviroArmour® Polycarbonate Back Panel - 24"x 24" - BPP2424

24×24 inch polycarbonate back panel designed to shield access control readers, strike hardware, and manual call points from environmental exposure

  • Transparent polycarbonate shields readers and strike hardware from UV, moisture, and impact.
  • 24×24-inch form factor aligns with standard commercial reader and strike hardware layouts.
  • Runs at 9VDC, integrating directly into standard access control power architectures.
Free shipping over $499
$162.86 $161.99 Save $0.87
The item has been added Add to quote
$162.86 $161.99 Save $0.87
Save $0.87 Add to cart Add to quote
Save $0.09
STI EnviroArmour® Polycarbonate Back Panel - 12" x 10" - BPP1210
Add to Cart The item has been added

STI BPP1210

STI EnviroArmour® Polycarbonate Back Panel - 12" x 10" - BPP1210

12" × 10" polycarbonate back panel engineered to protect access control reader and strike installations from moisture, dust, and physical damage in

  • Polycarbonate construction seals reader/strike installations against moisture and dust.
  • Outdoor-rated panel protects components in salt spray, high humidity, and temp swings.
  • Four 7mm masonry fixing holes enable direct door-frame mounting with included wall anchors.
Free shipping over $499
$34.08 $33.99 Save $0.09
The item has been added Add to quote
$34.08 $33.99 Save $0.09
Save $0.09 Add to cart Add to quote

System Design, Deployment & Technical Support

Support services and planning resources for commercial surveillance, access control, and infrastructure deployments.

Fixed scope • Fixed price

System Design Assistance

  • Get help validating product compatibility
  • Coverage requirements
  • Storage planning and deployment architecture before you buy.
Request Design Help

Deployment & Configuration Support

  • Access fixed-scope support for rollout planning
  • User setup guidance
  • Migration and system standardization across single-site or multi-site deployments
View Support Services

Guides, Tools & Calculators

  • PoE requirements
  • Storage retention
  • Camera selection and deployment methodology
Open Technical Resources