Panduit PSL-DCPLE-GR Standard Lock-In Device for Patch Panel Port Security

Overview

The Panduit PSL-DCPLE-GR is a green polycarbonate port lock-in device engineered to physically secure patch cord connections at the jack — preventing unauthorized disconnection and accidental cable pulls in structured cabling environments. If you manage a high-density data center or IDF closet where unauthorized port access or cable disruption is a real operational risk, the PSL-DCPLE-GR delivers a mechanical enforcement layer that complements logical network access controls. Each pack contains 10 individual lock-in devices and one dedicated removal tool, so a single order covers a full panel row without hunting for the right tool.

This is the standard-profile variant, sized for jacks mounted flush or in slight protrusion from the panel surface. The elongated cover design protects the locking mechanism from inadvertent contact, while the green color coding lets you implement a consistent visual policy — whether that means segmenting guest ports, flagging critical infrastructure connections, or simply enforcing a color-per-VLAN scheme that your team can recognize at a glance. Browse the full Panduit catalog for compatible lock-in devices in additional colors and profiles.

Key Features

• Polycarbonate Construction: Polycarbonate offers a balance of impact resistance and dimensional stability that softer plastics don't — the locking tab won't creep or deform under repeated insertion cycles in a busy patch environment, which matters when technicians are working fast in low-light rack conditions.
• Standard Projection Profile: Designed specifically for jacks that protrude from the surface rather than flush-mounted or deeply recessed configurations. Using this on the wrong jack geometry risks incomplete engagement — verify your panel jack protrusion before ordering, or consider the elongated variant for recessed installations. Explore patch panel accessories to find the matching profile.
• Elongated Cover Design: The extended cover shrouds the locking mechanism, reducing the chance that adjacent cable movement or accidental contact trips the release. In dense panels where cables bundle close to the face, this physical protection matters more than it sounds.
• Green Color Coding: At 0.55 in wide and 0.74 in tall (13.9 mm × 18.8 mm), these devices sit neatly side-by-side on a 1U panel without crowding adjacent ports. Green is a common designation for production or trusted-tier connections in structured cabling color policy standards — deploy alongside other physical port security devices for a consistent scheme.
• 10-Pack Quantity with Removal Tool Included: A single PSL-DCPLE-GR pack covers an entire horizontal row on a standard 12-port patch panel face, and the included removal tool means you're not improvising with a pen cap or damaging the tab trying to release a locked port. The carton quantity is 20 units per case if you're stocking at scale.
• Precise Physical Dimensions: 0.55 in (13.9 mm) wide × 0.74 in (18.8 mm) tall. These dimensions are worth checking against your panel face plate spacing — if your ports are tightly grouped under 16 mm center-to-center, confirm clearance before deploying in bulk.
• Single-Unit Package Quantity: Each device ships as an individual unit within the 10-pack, so you can deploy selectively rather than locking every port on a panel. Useful when only specific ports require physical access restriction while others remain open for routine moves, adds, and changes.

Integration & Compatibility

The PSL-DCPLE-GR is designed for Panduit's copper-systems cabling infrastructure, specifically for jacks with a standard surface-protrusion profile. It is compatible with standard RJ-45 patch panel jacks where the jack face sits proud of the panel surface — the geometry that the standard lock-in device is built to engage. If your installation uses flush or recessed-face jacks, confirm the jack protrusion measurement against Panduit's compatibility guidance before deploying. For structured cabling deployments that pair physical port security with network switches and patch panels, integrating lock-in devices at the panel face closes the physical access gap that software-only port security leaves open. Pair with a color-matched patch cable scheme to reinforce your visual policy at every connection point.

What's in the Box

• 10× PSL-DCPLE-GR green standard lock-in devices
• 1× removal tool

Frequently Asked Questions

Q: What jack profile is the PSL-DCPLE-GR designed for — flush-mount, standard protrusion, or recessed?

A: The PSL-DCPLE-GR is the standard-profile variant, designed for jacks that protrude from the panel surface. It is not intended for flush or deeply recessed jack configurations — check your jack geometry before deploying in bulk.

Q: How many lock-in devices come in one PSL-DCPLE-GR package, and is a removal tool included?

A: Each package includes 10 green lock-in devices and one dedicated removal tool. The carton quantity is 20 units per case.

Q: What material are the PSL-DCPLE-GR lock-in devices made from?

A: They are made from polycarbonate, which provides impact resistance and dimensional stability through repeated use.

Q: What are the physical dimensions of the PSL-DCPLE-GR?

A: Each device measures 0.55 in (13.9 mm) wide by 0.74 in (18.8 mm) tall. Verify panel port spacing allows clearance before ordering at scale.

Q: Can the PSL-DCPLE-GR be used to enforce a color-coded port policy?

A: Yes. The green color allows consistent visual segmentation — for example, designating trusted or production-tier ports — when deployed alongside lock-in devices in other Panduit colors for different port classifications.

Q: What cabling category or system is the PSL-DCPLE-GR associated with?

A: The PSL-DCPLE-GR is part of Panduit's copper-systems physical security device line, designed for structured copper cabling patch panel environments.