Panduit PSL-DCPLE-GR-C Standard Lock-In Device for RJ45 Patch Panels — Green, 100-Pack
Overview
The Panduit PSL-DCPLE-GR-C is a pack of 100 green polycarbonate lock-in devices designed to secure patch cord connections at RJ45 jacks, preventing unauthorized removal or accidental disconnection in structured cabling environments. If you manage high-density wiring closets, data centers, or IDF rooms where unauthorized port access is a real operational risk, this is the component that closes that gap without requiring cabinet locks or re-architecting your patch panel layout. Five removal tools are included, so technicians can release connections without improvised tools that risk damaging jack housings.
The PSL-DCPLE-GR-C is built for standard surface-mount jack installations — where the jack body protrudes from the panel face. The elongated cap design protects the locking mechanism itself from snagging or accidental release during cable management operations. Green color coding supports color-zoning schemes common in data center and enterprise copper network infrastructure deployments, making visual port identification faster and reducing mis-patch incidents.
Key Features
- Polycarbonate construction: Polycarbonate is the right material here — it handles the repeated insertion and removal cycles of active patch environments without brittleness or deformation. A failed lock-in device that cracks in a production wiring closet causes exactly the unauthorized-access problem the device is supposed to prevent.
- Standard (surface-mount) geometry: Fits jacks where the housing face is flush with or protrudes from the panel surface — the most common configuration in structured cabling panels. If your jacks are recessed, this variant is not the correct pick; Panduit offers a separate low-profile lock-in device for those installations.
- Elongated protective cap: The extended cap shrouds the locking tab, reducing accidental release during dense cable routing. In high-density 48-port or 96-port panels where cables run close together, this matters — an unshielded latch can be bumped free during adjacent port work.
- Green color coding: A single color across 100 units lets you designate an entire zone — VLAN segment, floor, or security tier — by color. Pair this with color-matched patch cords and your tech can visually audit port assignments without pulling up the documentation.
- 100-unit pack with 5 removal tools: At a 20:1 ratio of lock-in devices to removal tools, Panduit is accounting for the reality that tools walk. Five tools per 100 ports means there's a spare for each technician on a typical 2-3 person operations team without ordering separately.
- Compact footprint — 0.55 in. W × 0.74 in. H (13.9 mm × 18.8 mm): At under 19mm tall and 14mm wide, these lock-in devices clear adjacent ports and do not interfere with cable management fingers or horizontal managers at standard 1U and 2U patch panel spacings.
- Carton quantity of 10 units per carton: For large-scale deployments — enterprise rollouts, data center build-outs — the 10-carton case pack (1,000 devices) keeps procurement simple. Order by case when populating an entire rack room.
Integration & Compatibility
The PSL-DCPLE-GR-C is engineered for Panduit's copper systems port security lineup and is compatible with standard surface-mount RJ45 jacks as found in the majority of Cat5e, Cat6, and Cat6A patch panel installations. It functions as a physical deterrent device — no electrical connection, no firmware, no configuration. Deployment is purely mechanical: insert the lock-in device into the jack port, and it holds the patch cord's locking tab depressed and secured. Removal requires the included tool, which releases the latch without damaging the jack or cord.
For environments running physical security programs that include port-level access control alongside logical security (802.1X, network access control), these lock-in devices address the physical layer gap that software controls cannot cover — a rogue device plugged in during a brief unsupervised window. They are a complement to, not a replacement for, network-layer controls.
This device is part of Panduit's broader Panduit physical security and copper systems catalog, which includes matching lock-in devices in multiple colors for full zone-based color schemes.
What's in the Box
- 100x PSL-DCPLE-GR-C green standard lock-in devices
- 5x removal tools
Frequently Asked Questions
Q: What type of jack is the PSL-DCPLE-GR-C designed for — surface-mount or recessed?
A: The PSL-DCPLE-GR-C is specifically a standard lock-in device designed for surface-mount jacks, where the jack body protrudes from the panel surface. For recessed jack installations, Panduit offers a separate low-profile lock-in device variant. Using the wrong profile can result in improper fit and unreliable locking.
Q: How many removal tools are included in the 100-pack?
A: The PSL-DCPLE-GR-C pack includes 5 removal tools alongside 100 lock-in devices. The tools are required for releasing locked connections without damaging the jack housing or patch cord.
Q: Can the PSL-DCPLE-GR-C be reused after removal?
A: The lock-in devices are made from polycarbonate and are designed to withstand repeated insertion and removal cycles typical of active patch panel environments. However, like any mechanical locking component, longevity depends on handling. Panduit packages them in quantities that allow replacement without disruption.
Q: What are the physical dimensions of the PSL-DCPLE-GR-C lock-in device?
A: Each device measures 0.55 inches (13.9 mm) wide and 0.74 inches (18.8 mm) tall — compact enough to clear adjacent ports at standard patch panel spacings.
Q: Does the PSL-DCPLE-GR-C come in other colors?
A: Green is the color for this SKU (PSL-DCPLE-GR-C). Panduit's lock-in device line is available in multiple colors to support color-zoned port management schemes. Specify the appropriate color-coded SKU when ordering for a multi-zone deployment.
Q: What is the package quantity and carton quantity for the PSL-DCPLE-GR-C?
A: Each package contains 1 unit of the 100-pack (100 lock-in devices + 5 tools). Cartons contain 10 packages, giving you 1,000 lock-in devices per carton — suitable for large-scale data center or enterprise wiring closet deployments.
The PSL-DCPLE-GR-C addresses something most physical security audits flag and most network teams treat as optional until an incident forces the conversation: layer-1 port lockdown. At 0.55 in. wide and 0.74 in. tall, these polycarbonate devices fit into a standard surface-mount RJ45 jack and mechanically prevent cord removal without the included tool — no credentials, no configuration, no exceptions. One hundred per pack with five tools means a single purchase covers a fully populated 48-port panel twice over, with tools to spare.
Technical Highlights:
- Polycarbonate material: Holds up to repeated tool-based removal cycles without cracking or deforming — important in environments where port assignments change quarterly or during moves/adds/changes.
- Standard surface-mount geometry: Engineered for the most common patch panel jack configuration. At 13.9 mm wide and 18.8 mm tall, the elongated cap clears adjacent ports and horizontal cable managers at standard 1U panel pitch.
- 100-unit pack with 5 removal tools: The 20:1 ratio is intentional — accounts for tool attrition in multi-technician environments without requiring a separate tool order. Carton quantity of 10 packs (1,000 devices) scales for rack-room deployments.
Deployment Considerations:
- Confirm your jack type before ordering: PSL-DCPLE-GR-C is surface-mount only. Recessed jacks require the low-profile Panduit variant — mixing profiles in the same panel creates inconsistent locking and frustrated technicians.
- Green color-coding is most useful when it's systematic — assign green to a specific VLAN segment, security zone, or floor before deployment. Deploying color randomly eliminates the visual management benefit entirely.
This product is the right call for enterprise IDF closets, co-location cage buildouts, or any copper patch environment where physical port access needs to be controlled as rigorously as logical access — particularly in SOC 2 or PCI-DSS environments where physical access controls on network infrastructure are an audit line item.
