Speco Technologies CVC607CMT2.2 Corner Mount Camera Housing
The CVC607CMT2.2 is a corner-mount camera housing built for installers who need a compact camera position at a room or hallway corner instead of a flat wall or ceiling surface. Corner mounting gets you a wider effective sight line down two intersecting walls from a single mount point — useful in stairwells, hallway intersections, and retail aisles where a standard wall bracket forces an awkward viewing angle. The clear housing dome sits inside a white mount body, and the assembly carries a vandal-resistant rating for areas where the camera is within reach of the public.
Compatibility
The CVC607CMT2.2 is sized for Speco's compact HD-TVI corner-mount camera series sharing the CVC607 housing platform. Confirm your specific Speco HD-TVI camera model uses the CVC607-series housing footprint before ordering, since mount geometry is model-specific and not interchangeable across unrelated Speco camera lines.
Installation Notes
The corner mount body installs directly into the intersection of two walls, positioning the enclosed camera to cover both adjoining sightlines. The white housing finish is intended to blend with standard interior wall and trim colors, and the vandal-resistant housing rating makes this a reasonable choice for corridors, stairwells, and other public-access areas where the unit could otherwise be struck or tampered with.
Pair this housing with a compatible camera from the CVC607 series to complete the installation, and route cabling through the corner cavity before mounting for a cleaner finish. For broader system planning, review a camera selection guide when matching housings to camera models, and check the Speco Technologies catalog for compatible camera bodies. If this corner location is part of a larger coverage plan, browse IP cameras and pair the run with a network video recorder sized to your channel count, plus a PoE switch if the camera end uses network power.
