Middle Atlantic SNE 24W Full Plexi Front/rear Door 45SP - SNE24-PD-45

Middle Atlantic SNE24-PD-45 45U Full Plexi Front/Rear Rack Door

Overview

The Middle Atlantic SNE24-PD-45 is a full plexiglass door set engineered for 45U SNE series racks. Sized at 81.3" H x 24" W, it pairs clear visibility into live rack equipment with the structural integrity of a steel and plexiglass construction — the practical answer when you need visual confirmation of indicator lights and hardware status without opening the enclosure. This is the door specified when your rack lives in a shared room, data closet, or operations center where incidental contact, cable clutter, or untrained hands are a real operational risk. The SNE24-PD-45 (often searched as SNE24 PD 45) covers both front and rear positions, so you can outfit a full enclosure with a single SKU rather than sourcing mismatched door components separately.

Key Features

• Full Plexiglass Panels, Front and Rear: Clear plexiglass across both door faces means you can visually audit drive activity LEDs, port link states, and power status from outside the rack — critical during incident response when you need fast triage without disturbing live connections.
• Steel and Plexiglass Construction: The steel frame provides the rigidity needed to prevent door warping over years of open/close cycling, while the plexiglass panel resists incidental impact better than acrylic substitutes. In a security operations environment, that combination holds up to the daily wear of high-access racks.
• 45U Rack Height Compatibility: Designed specifically for 45U SNE series enclosures — the full 81.3" panel height means no exposed gaps at top or bottom, which matters both for aesthetics in client-visible installs and for maintaining consistent airflow management within the enclosure.
• 24" Width Format: The 24" width matches the standard SNE rack footprint exactly. No field trimming, no shimming — the door seats flush against the frame and seals the enclosure perimeter cleanly, preserving cable management lanes along the sides.
• Black Textured Powder Coat Finish: The powder coat finish on the steel components resists scratching and fingerprinting during installation handling. Textured black blends with standard rack aesthetics in both enterprise equipment rooms and field-deployed security headend enclosures.
• Rack-Mountable Form Factor: Designed as a direct component of the SNE series rack system — not a retrofit or universal-fit accessory. That means mounting points, hinge alignment, and latch geometry are factory-spec to the SNE frame, which eliminates the alignment issues common with aftermarket doors.

Integration and Compatibility

The SNE24-PD-45 is purpose-built for Middle Atlantic SNE series racks in the 45U, 24" width configuration. If your rack is a different unit height or width — for example a 42U or a 19"-equivalent frame — verify your SNE series model number before ordering, as door dimensions are not interchangeable across rack sizes within the SNE line. This door is part of Middle Atlantic's Middle Atlantic rack infrastructure ecosystem, which covers everything from enclosures to cable management and power distribution. For a full look at compatible enclosure accessories, browse the rack enclosures category. If you are building out a security headend or network operations rack, pairing this door with appropriate rack accessories such as blanking panels and cable managers ensures a clean, serviceable installation. Planning a full surveillance headend? See the network video recorders category for NVR and server hardware that commonly populates SNE-series enclosures. For guidance on sizing and configuring rack infrastructure for security deployments, the rack planning guide covers key considerations from U-count to airflow management.

Frequently Asked Questions

Q: What rack series and size is the SNE24-PD-45 compatible with?

A: The SNE24-PD-45 is designed for Middle Atlantic SNE series racks in the 45U, 24-inch width configuration. It is not a universal-fit door — confirm your SNE rack model matches 45U and 24" width before ordering.

Q: Does the SNE24-PD-45 include both front and rear doors, or just one?

A: The product is described as a full front/rear door for the 45U SNE rack, meaning it covers both the front and rear positions of the enclosure.

Q: What materials are used in the SNE24-PD-45?

A: The door is constructed from steel and plexiglass with a black textured powder coat finish on the steel components.

Q: What are the dimensions of the SNE24-PD-45?

A: The SNE24-PD-45 measures 81.3 inches high by 24 inches wide, matching the full panel height of a 45U SNE series rack enclosure.

Q: Can the SNE24-PD-45 be used on a rack from a different manufacturer?

A: The SNE24-PD-45 is engineered specifically for Middle Atlantic SNE series racks. Mounting points and hinge geometry are matched to the SNE frame — use on non-Middle Atlantic or non-SNE enclosures is not supported and may result in fitment issues.

Q: What finish does the SNE24-PD-45 have?

A: Black textured powder coat on the steel frame components, consistent with the standard SNE series rack aesthetic.

Jerry Tildsen

When I spec the SNE24-PD-45 into a security headend build, the primary driver is almost always the same: the rack is in a shared space and the operator needs visual confirmation of hardware state without physically opening the enclosure. At 81.3 inches tall, that plexiglass panel covers the full face of a 45U SNE rack — you get unobstructed sightlines to every drive bay, switch port, and NVR status LED without touching a latch.

Technical Highlights:

• Full 45U panel coverage at 81.3" H: No partial-height gaps that expose equipment edges or compromise the enclosure's physical security posture — the door seals the full rack face in both front and rear positions.
• 24" width spec match: Factory-fit to the SNE 24" frame means door alignment and latch engagement are mechanical givens, not field-adjustment problems. That matters on installs where you're commissioning under time pressure.
• Steel and plexiglass composite: Steel provides the hinge and latch load-bearing structure; plexiglass handles the visibility requirement without the UV yellowing risk of standard acrylic panels over multi-year deployments in fluorescent-lit equipment rooms.

Deployment Considerations:

• Verify your SNE rack is the 45U, 24" width variant before ordering — Middle Atlantic SNE doors are not cross-compatible across rack heights, and a 42U or 40U SNE will require a different door SKU entirely.
• Plexiglass panels provide visual access but not meaningful physical security on their own — if the deployment environment requires controlled access to rack contents, pair with an appropriate locking door handle or rack-level access control.

This door fits naturally in security operations centers, network closets, and field-deployed surveillance headend racks where the equipment owner needs daily visual confirmation of system status without disrupting live infrastructure — specifically in multi-tenant or shared-facility environments where an open rack face is not operationally acceptable.